FCC ID OJFMA2K-IDEN-SMR
RF BOOSTER
by Corning Optical Communication Wireless
Grantee Code: OJF Product Code: MA2KIDENSMR
Latest application date: 2007-05-09
FCC ID Device Details
| FCC ID | OJFMA2K-IDEN-SMR |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | OJF |
| Product Code | MA2KIDENSMR |
| Applicant Business | Corning Optical Communication Wireless 🇺🇸 |
| Related Domains |  corning.com |
| Equipment Class | RF BOOSTER |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 851-869 MHz | Class II permissive change or modification of presently authorized equipment | 2007-05-09 |
| 851-869 MHz | Original Equipment | 2006-06-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual Revised | Users Manual | 2006-06-07 | PDF 1.5 MB |
| Internal Photos | Internal Photos | 2006-06-07 | PDF 2 MB |
| EXTERNAL PHOTOS | External Photos | 2007-05-09 | PDF 646 KB |
| External Photos | External Photos | 2006-06-07 | PDF 95.1 KB |
| Label Information Revised | ID Label/Location Info | 2006-06-07 | PDF 19 KB |
| Further Operational Description | Operational Description | 2006-06-07 | PDF 1.2 MB |
| Operational Description Revised | Operational Description | 2006-06-07 | PDF 2.1 MB |
| Test Photos | Test Setup Photos | 2006-06-07 | PDF 74.1 KB |
| TEST REPORT | Test Report | 2007-05-09 | PDF 1.8 MB |
| Test Report Revised | Test Report | 2006-06-07 | PDF 1.3 MB |
| CLASS II CHANGE COVER LETTER | Cover Letter(s) | 2007-05-09 | PDF 49.5 KB |
| Comments 1 | Cover Letter(s) | 2006-06-07 | PDF 60 KB |
| Comments 2 | Cover Letter(s) | 2006-06-07 | PDF 59 KB |
| Comments 3 | Cover Letter(s) | 2006-06-07 | PDF 45.2 KB |
| Confidentiality Letter | Cover Letter(s) | 2006-06-07 | PDF 28 KB |
| Response 1 | Cover Letter(s) | 2006-06-07 | PDF 13.2 KB |
| Response 2 | Cover Letter(s) | 2006-06-07 | PDF 8.6 KB |
| Response 3 | Cover Letter(s) | 2006-06-07 | PDF 6.5 KB |
| RF Exposure Info 1 051806 | RF Exposure Info | 2006-06-07 | PDF 4.9 KB |
| RF Exposure Info 2 060706 | RF Exposure Info | 2006-06-07 | PDF 6.5 KB |
| Tune Up Information Revised | Parts List/Tune Up Info | 2006-06-07 | PDF 169.8 KB |
| Block Diagram Metadata only | Block Diagram | PDF 61.6 KB | |
| Schemaitcs 2 Metadata only | Schematics | PDF 26.8 KB | |
| Schematics 1 Metadata only | Schematics | PDF 404.5 KB | |
| DC Voltage and Current Metadata only | Parts List/Tune Up Info | PDF 21.2 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 46.5 KB |
Application Information
| Application ID | CrRL50oO6NXGctJvaPFrsw== |
|---|---|
| Final Action Date | 2007-05-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0024751430 |
| Model | MA2K-IDEN-SMR |
| Frequency Range | 851-869 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | RF BOOSTER |
| Responsible Party | Habib Riazi, Dir. RF and Systems Manager, PLM, riazih@corning.com , (703) 714-7920 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is for total power per service per output. Part of RF Distribution System may include FCC ID: OJFMA1000, OJFMA1200, OJFMA850, OJFMA850A, OFJMA2K-CELL-PCSE, and/or OJFMA1K-CELL-PCSE. The maximum antenna gain is limited not to exceed 10dBi. The antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of section 2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co- location requirements of Section 1.1307(b)(3). CLASS II CHANGE: This Class II Change adds an alternate IC power amplifier, and additional test points on the PCB for automatic testing.. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| CrRL50oO6NXGctJvaPFrsw== | 2007-05-09 | Class II permissive change or modification of presently authorized equipment |
| cRCEdbsXk8fIXphHcgzGrA== | 2006-06-07 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application CrRL50oO6NXGctJvaPFrsw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 05/09/2007 Application Dated: 05/09/2007 |
| Corning Optical Communication Wireless |
| 13221 Woodland Park Rd |
| Suite 400 |
| Herndon, VA 20171 |
| Attention: Habib Riazi , Dir. RF and Systems Manager, PLM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFMA2K-IDEN-SMR |
| Name of Grantee: | Corning Optical Communication Wireless |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | RF BOOSTER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 851.0 - 869.0 | 0.074 | Amp | DXW | |
| 90 | 929.0 - 941.0 | 0.026 | Amp | F8W |
| Power output listed is for total power per service per output. Part of RF Distribution System may include FCC ID: OJFMA1000, OJFMA1200, OJFMA850, OJFMA850A, OFJMA2K-CELL-PCSE, and/or OJFMA1K-CELL-PCSE. The maximum antenna gain is limited not to exceed 10dBi. The antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of section 2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co- location requirements of Section 1.1307(b)(3). CLASS II CHANGE: This Class II Change adds an alternate IC power amplifier, and additional test points on the PCB for automatic testing.. |
EAS Grant - Application CrRL50oO6NXGctJvaPFrsw==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Corning Optical Communication Wireless 13221 Woodland Park Rd Suite 400 Herndon, VA 20171 United States | Date of Grant: 05/09/2007 Application Dated: 05/09/2007 |
| Attention: Habib Riazi , Dir. RF and Systems Manager, PLM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFMA2K-IDEN-SMR |
| Name of Grantee: | Corning Optical Communication Wireless |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | RF BOOSTER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 851.0 - 869.0 | 0.074 | Amp | DXW | |
| 90 | 929.0 - 941.0 | 0.026 | Amp | F8W |
| Power output listed is for total power per service per output. Part of RF Distribution System may include FCC ID: OJFMA1000, OJFMA1200, OJFMA850, OJFMA850A, OFJMA2K-CELL-PCSE, and/or OJFMA1K-CELL-PCSE. The maximum antenna gain is limited not to exceed 10dBi. The antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of section 2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co- location requirements of Section 1.1307(b)(3). CLASS II CHANGE: This Class II Change adds an alternate IC power amplifier, and additional test points on the PCB for automatic testing..
|
| Mail To: |
| EA319626 |
TCB Grant - Application cRCEdbsXk8fIXphHcgzGrA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/07/2006 Application Dated: 05/30/2006 |
| Corning Optical Communication LLC |
| 6 Concord Road |
| Shrewsbury, MA 01545 |
| Attention: Jyotin Basrur , Senior Director, Product Line Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFMA2K-IDEN-SMR |
| Name of Grantee: | Corning Optical Communication LLC |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | RF Booster |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 851.0 - 869.0 | 0.074 | Amp | DXW | |
| 90 | 929.0 - 941.0 | 0.026 | Amp | F8W |
| Power output listed is for total power per service per output. Part of RF Distribution System may include FCC ID: OJFMA1000, OJFMA1200, OJFMA850, OJFMA850A, OFJMA2K-CELL-PCSE, and/or OJFMA1K-CELL-PCSE. The maximum antenna gain is limited not to exceed 10dBi. The antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of section 2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co- location requirements of Section 1.1307(b)(3). |
EAS Grant - Application cRCEdbsXk8fIXphHcgzGrA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Corning Optical Communication LLC 6 Concord Road Shrewsbury, MA 01545 United States |
Date of Grant: 06/07/2006 Application Dated: 05/30/2006 |
| Attention: Jyotin Basrur , Senior Director, Product Line Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFMA2K-IDEN-SMR |
| Name of Grantee: | Corning Optical Communication LLC |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | RF Booster |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 851.0 - 869.0 | 0.074 | Amp | DXW | |
| 90 | 929.0 - 941.0 | 0.026 | Amp | F8W |
| Power output listed is for total power per service per output. Part of RF Distribution System may include FCC ID: OJFMA1000, OJFMA1200, OJFMA850, OJFMA850A, OFJMA2K-CELL-PCSE, and/or OJFMA1K-CELL-PCSE. The maximum antenna gain is limited not to exceed 10dBi. The antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of section 2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co- location requirements of Section 1.1307(b)(3). |
| Mail To: |