FCC ID OJFMA850A

In Building RF Distribution System

by Corning Optical Communication LLC

Grantee Code: OJF   Product Code: MA850A
Latest application date: 2006-07-13

FCC ID Device Details

FCC IDOJFMA850A
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeOJF
Product CodeMA850A
Applicant BusinessCorning Optical Communication LLC 🇺🇸
Related Domains corning.com mobileacess.com
Equipment ClassIn Building RF Distribution System
Test FirmHermon Laboratories Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2006-07-13
2412-2462 MHzOriginal Equipment2006-07-13

Exhibits

DocumentTypeAvailableFile
Users Manual Revision 4Users Manual2006-07-13PDF 1.1 MB
Internal Photos 850AInternal Photos2006-07-13PDF 1 MB
Internal Photos AP 2 4 GHzInternal Photos2006-07-13PDF 364.1 KB
Internal Photos AP 5 GHzInternal Photos2006-07-13PDF 239.6 KB
Internal Photos AP GeneralInternal Photos2006-07-13PDF 2.1 MB
External Photos 850AExternal Photos2006-07-13PDF 120.6 KB
External Photos APExternal Photos2006-07-13PDF 186.4 KB
850A Label InfoID Label/Location Info2006-07-13PDF 39.4 KB
AP Label Info RevisedID Label/Location Info2006-07-13PDF 24.7 KB
AP InfoOperational Description2006-07-13PDF 270.2 KB
H and S AntennaOperational Description2006-07-13PDF 140.1 KB
H and S Antenna InfoOperational Description2006-07-13PDF 140.1 KB
Mars Antenna InfoOperational Description2006-07-13PDF 20.1 KB
Operational DescriptionOperational Description2006-07-13PDF 294.5 KB
Triplexer InformationOperational Description2006-07-13PDF 227.9 KB
Test PhotosTest Setup Photos2006-07-13PDF 125.4 KB
RE Emissions only 2 4 GHz RevisedTest Report2006-07-13PDF 540.7 KB
Test Report 1 Part 1Test Report2006-07-13PDF 2.1 MB
Test Report 1 Part 2Test Report2006-07-13PDF 2 MB
Test Report 2 Part 1Test Report2006-07-13PDF 1.6 MB
Test Report 2 Part 2Test Report2006-07-13PDF 2.5 MB
Test Report 3Test Report2006-07-13PDF 557.6 KB
Professional Installation JustificationAttestation Statements2006-07-13PDF 14.9 KB
Comments 4Cover Letter(s)2006-07-13PDF 77.8 KB
Comments 5Cover Letter(s)2006-07-13PDF 47.9 KB
Comments 6Cover Letter(s)2006-07-13PDF 46 KB
Confidentiality Letter RevisedCover Letter(s)2006-07-13PDF 8.5 KB
Discussion with FCC Prior to ApprovalCover Letter(s)2006-07-13PDF 86.7 KB
Discussion with FCC Prior to ApprovalCover Letter(s)2006-07-13PDF 86.7 KB
Response 4Cover Letter(s)2006-07-13PDF 23.3 KB
Response 5Cover Letter(s)2006-07-13PDF 7.3 KB
Response 6Cover Letter(s)2006-07-13PDF 6.6 KB
RF Exposure InfoRF Exposure Info2006-07-13PDF 7.4 KB
RF Exposure Revision 2RF Exposure Info2006-07-13PDF 7.2 KB
Basic Block Diagram Metadata onlyBlock DiagramPDF 10.1 KB
Detailed Block Diagram Metadata onlyBlock DiagramPDF 34.9 KB
Schematics Metadata onlySchematicsPDF 278.9 KB

Application Information

Application IDSlIDU9nNVcIV7p5uruyE3w==
Final Action Date2006-07-13
Application PurposeOriginal Equipment
Applicant FRN0017154329
ModelMA850A
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionIn Building RF Distribution System
Responsible PartyJyotin Basrur, Senior Director, Product Line Management, basrurj@corning.com , 817-431-7894
Technical ContactAlex Usoskin, Hermon Laboratories, mail@hermonlabs.com , 972 4628 8001
Non-Technical ContactKohav Yadid, Mobile Access Networks Ltd., kyadid@mobileacess.com , 972 8918 3897
Test FirmAlexander Usoskin, Hermon Laboratories Ltd., mail@hermonlabs.com , 972-4628-8001
TCB Emailhotline@ATCB.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. Professional installation is required - user installation is prohibited. This device has been investigated with typical Cellular 800 and PCS 1900 frequency simultaneously with 802.11 a/b/g transmission. This device must be marketed in compliance per section 15.204(b) of FCC rules. Only the 4 access points with identical radio module as documented in this filing can be sold with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
SlIDU9nNVcIV7p5uruyE3w==2006-07-13Original Equipment
LXRe2jzGr7FyC95x3ko4YQ==2006-07-13Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.454000015CCC
5180-5240 MHz0.00215ECC
5260-5320 MHz0.01115ECC
5745-5805 MHz0.0915ECC

Grants

TCB Grant - Application SlIDU9nNVcIV7p5uruyE3w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/13/2006

Application Dated: 07/12/2006
Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJFMA850A
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: In Building RF Distribution System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.002  
CC 15E 5260.0  -  5320.0 0.011  
CC 15E 5745.0  -  5805.0 0.09  

Output power listed is conducted. Professional installation is required - user installation is prohibited. This device has been investigated with typical Cellular 800 and PCS 1900 frequency simultaneously with 802.11 a/b/g transmission. This device must be marketed in compliance per section 15.204(b) of FCC rules. Only the 4 access points with identical radio module as documented in this filing can be sold with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application SlIDU9nNVcIV7p5uruyE3w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
United States
  Date of Grant: 07/13/2006

Application Dated: 07/12/2006
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJFMA850A
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: In Building RF Distribution System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.002  
CC 15E 5260.0  -  5320.0 0.011  
CC 15E 5745.0  -  5805.0 0.09  

Output power listed is conducted. Professional installation is required - user installation is prohibited. This device has been investigated with typical Cellular 800 and PCS 1900 frequency simultaneously with 802.11 a/b/g transmission. This device must be marketed in compliance per section 15.204(b) of FCC rules. Only the 4 access points with identical radio module as documented in this filing can be sold with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application LXRe2jzGr7FyC95x3ko4YQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/13/2006

Application Dated: 07/12/2006
Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJFMA850A
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Digital Transmission System
Notes: In Building RF Distribution System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.454  

Output power listed is conducted. Professional installation is required - user installation is prohibited. This device has been investigated with typical Cellular 800 and PCS 1900 frequency simultaneously with 802.11 a/b/g transmission. This device must be marketed in compliance per section 15.204(b) of FCC rules. Only the 4 access points with identical radio module as documented in this filing can be sold with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application LXRe2jzGr7FyC95x3ko4YQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
United States
  Date of Grant: 07/13/2006

Application Dated: 07/12/2006
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJFMA850A
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Digital Transmission System
Notes: In Building RF Distribution System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.454  

Output power listed is conducted. Professional installation is required - user installation is prohibited. This device has been investigated with typical Cellular 800 and PCS 1900 frequency simultaneously with 802.11 a/b/g transmission. This device must be marketed in compliance per section 15.204(b) of FCC rules. Only the 4 access points with identical radio module as documented in this filing can be sold with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: