FCC ID OJFMAAR70-SMU2

AP 70 Dual-Radio

by Corning Optical Communication Wireless

Grantee Code: OJF   Product Code: MAAR70SMU2
Latest application date: 2008-12-31

FCC ID Device Details

FCC IDOJFMAAR70-SMU2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeOJF
Product CodeMAAR70SMU2
Applicant BusinessCorning Optical Communication Wireless 🇺🇸
Related Domains corning.com timcoengr.com
Equipment ClassAP 70 Dual-Radio
Test FirmIsrael Testing Laboratories

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: Q9DAP70SDR Grant Date: 04/22/20082008-12-31
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: Q9DARUBA70 Grant Date: 10/05/20042008-12-10

Exhibits

DocumentTypeAvailableFile
external photosExternal Photos2008-12-31PDF 41.7 KB
External PhotosExternal Photos2008-12-10PDF 41.7 KB
label locationID Label/Location Info2008-12-31PDF 26.7 KB
label sampleID Label/Location Info2008-12-31PDF 60.8 KB
Label LocationID Label/Location Info2008-12-10PDF 26.7 KB
Label SampleID Label/Location Info2008-12-10PDF 60.8 KB
authorization letterCover Letter(s)2008-12-31PDF 48.5 KB
change in id letterCover Letter(s)2008-12-31PDF 24.4 KB
Authorization LetterCover Letter(s)2008-12-10PDF 48.5 KB
Change Request LetterCover Letter(s)2008-12-10PDF 24.4 KB

Application Information

Application IDhiPBvzjEFaLni6ujh1EriQ==
Final Action Date2008-12-31
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: Q9DAP70SDR Grant Date: 04/22/2008
Applicant FRN0024751430
ModelMAAR70-SMU2
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionAP 70 Dual-Radio
Responsible PartyHabib Riazi, Dir. RF and Systems Manager, PLM, riazih@corning.com , (703) 714-7920
Technical ContactSid Sanders, Timco Engineering Inc., tei@timcoengr.com , 352-472-5500
Non-Technical ContactGretchen Greene, Timco Engineering Inc., tei@timcoengr.com , 352-472-5500
Test FirmIIan Cohen, Israel Testing Laboratories, sraz@itl.co.il , 972-3-5339022
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. Operation in the 5.15-5.25 GHz band is restricted to indoors only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
hiPBvzjEFaLni6ujh1EriQ==2008-12-31Change in identification of presently authorized equipment. Original FCC ID: Q9DAP70SDR Grant Date: 04/22/2008
kJiAW2+O+DXG0gWzLSYgQg==2008-12-10Change in identification of presently authorized equipment. Original FCC ID: Q9DARUBA70 Grant Date: 10/05/2004

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.10815C36, CC
5180-5240 MHz0.025415E
5260-5320 MHz0.026815E
5500-5700 MHz0.026815E
5745-5825 MHz0.03315C36, CC

Grants

TCB Grant - Application kJiAW2+O+DXG0gWzLSYgQg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 12/10/2008

Application Dated: 12/10/2008
Corning Optical Communication Wireless
13221 Woodland Park Rd
Suite 400
Herndon, VA 20171
 
Attention: Habib Riazi , Dir. RF and Systems Manager, PLM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJFMAAR70-SMU2
Name of Grantee:  Corning Optical Communication Wireless
Equipment Class: Digital Transmission System
Notes: 802.11 A/B/G Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15C 2412.0  -  2462.0 0.108  
36 CC 15C 5745.0  -  5825.0 0.033  

Power output listed is conducted. Professional installation is required. This Access Point is authorized for use only with antennas specified in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 38.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application kJiAW2+O+DXG0gWzLSYgQg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Corning Optical Communication Wireless
13221 Woodland Park Rd Suite 400
Herndon, VA 20171
United States
  Date of Grant: 12/10/2008

Application Dated: 12/10/2008
 
Attention: Habib Riazi , Dir. RF and Systems Manager, PLM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJFMAAR70-SMU2
Name of Grantee:  Corning Optical Communication Wireless
Equipment Class: Digital Transmission System
Notes: 802.11 A/B/G Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15C 2412.0  -  2462.0 0.108  
36 CC 15C 5745.0  -  5825.0 0.033  

Power output listed is conducted. Professional installation is required. This Access Point is authorized for use only with antennas specified in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 38.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application hiPBvzjEFaLni6ujh1EriQ==

This application does not exist.

EAS Grant - Application hiPBvzjEFaLni6ujh1EriQ==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Corning Optical Communication Wireless
13221 Woodland Park Rd Suite 400
Herndon, VA 20171
United States
  Date of Grant: 12/31/2008

Application Dated: 11/25/2008
 
Attention: Habib Riazi , Dir. RF and Systems Manager, PLM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJFMAAR70-SMU2
Name of Grantee:  Corning Optical Communication Wireless
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AP 70 Dual-Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.0254  
15E 5260.0  -  5320.0 0.0268  
15E 5500.0  -  5700.0 0.0268  

Power listed is conducted. Operation in the 5.15-5.25 GHz band is restricted to indoors only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: