FCC ID OJFMAC1242SMU-2
802.11 a/b/g ACCESS POINT
by Corning Optical Communication Wireless
Grantee Code: OJF Product Code: MAC1242SMU2
Latest application date: 2009-03-06
FCC ID Device Details
| FCC ID | OJFMAC1242SMU-2 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | OJF |
| Product Code | MAC1242SMU2 |
| Applicant Business | Corning Optical Communication Wireless 🇺🇸 |
| Related Domains |  corning.com |
| Equipment Class | 802.11 a/b/g ACCESS POINT |
| Test Firm | Israel Testing Laboratories |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: LDK102056 Grant Date: 08/21/2006 | 2009-03-06 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: LDK102056 Grant Date: 08/31/2005 | 2009-03-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2009-03-06 | PDF 202.5 KB |
| Label Location | ID Label/Location Info | 2009-03-06 | PDF 223.3 KB |
| Label Sample | ID Label/Location Info | 2009-03-06 | PDF 29.3 KB |
| Authorization Letter | Cover Letter(s) | 2009-03-06 | PDF 48.5 KB |
| Change Request Letter | Cover Letter(s) | 2009-03-06 | PDF 24.4 KB |
Application Information
| Application ID | bYaly20ay4sVgpnL6tNVmg== |
|---|---|
| Final Action Date | 2009-03-06 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: LDK102056 Grant Date: 08/21/2006 |
| Applicant FRN | 0024751430 |
| Model | MAC1242SMU-2 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11 a/b/g ACCESS POINT |
| Responsible Party | Habib Riazi, Dir. RF and Systems Manager, PLM, riazih@corning.com , (703) 714-7920 |
| Test Firm | IIan Cohen, Israel Testing Laboratories, sraz@itl.co.il  , 972-3-5339022 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | This device complies with the Software Defined Radio (SDR) requirements of Report and Order FCC 05-57. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This application was originally granted on 08/07/2006. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| bYaly20ay4sVgpnL6tNVmg== | 2009-03-06 | Change in identification of presently authorized equipment. Original FCC ID: LDK102056 Grant Date: 08/21/2006 |
| Wed6K47UzOmIoR0C8g28AA== | 2009-03-06 | Change in identification of presently authorized equipment. Original FCC ID: LDK102056 Grant Date: 08/31/2005 |
Equipment Authorization
Grants
TCB Grant - Application Wed6K47UzOmIoR0C8g28AA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 03/06/2009 Application Dated: 03/06/2009 |
| Corning Optical Communication Wireless |
| 13221 Woodland Park Rd |
| Suite 400 |
| Herndon, VA 20171 |
| Attention: Habib Riazi , Dir. RF and Systems Manager, PLM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFMAC1242SMU-2 |
| Name of Grantee: | Corning Optical Communication Wireless |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g ACCESS POINT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1 |
| This device complies with the Software Defined Radio (SDR) requirements of Report and Order FCC 05-57. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application Wed6K47UzOmIoR0C8g28AA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Corning Optical Communication Wireless 13221 Woodland Park Rd Suite 400 Herndon, VA 20171 United States |
Date of Grant: 03/06/2009 Application Dated: 03/06/2009 |
| Attention: Habib Riazi , Dir. RF and Systems Manager, PLM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFMAC1242SMU-2 |
| Name of Grantee: | Corning Optical Communication Wireless |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g ACCESS POINT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1 |
| This device complies with the Software Defined Radio (SDR) requirements of Report and Order FCC 05-57. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 03/06/2009 Application Dated: 03/06/2009 |
| Corning Optical Communication Wireless |
| 13221 Woodland Park Rd |
| Suite 400 |
| Herndon, VA 20171 |
| Attention: Habib Riazi , Dir. RF and Systems Manager, PLM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFMAC1242SMU-2 |
| Name of Grantee: | Corning Optical Communication Wireless |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g ACCESS POINT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5500.0 - 5700.0 | 0.05 | ||
| CC | 15E | 5180.0 - 5240.0 | 0.126 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0442 | ||
| CC | 15E | 5745.0 - 5805.0 | 0.0575 |
| This device complies with the Software Defined Radio (SDR) requirements of Report and Order FCC 05-57. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This application was originally granted on 08/07/2006. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application bYaly20ay4sVgpnL6tNVmg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Corning Optical Communication Wireless 13221 Woodland Park Rd Suite 400 Herndon, VA 20171 United States |
Date of Grant: 03/06/2009 Application Dated: 03/06/2009 |
| Attention: Habib Riazi , Dir. RF and Systems Manager, PLM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFMAC1242SMU-2 |
| Name of Grantee: | Corning Optical Communication Wireless |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g ACCESS POINT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5500.0 - 5700.0 | 0.05 | ||
| CC | 15E | 5180.0 - 5240.0 | 0.126 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0442 | ||
| CC | 15E | 5745.0 - 5805.0 | 0.0575 |
| This device complies with the Software Defined Radio (SDR) requirements of Report and Order FCC 05-57. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This application was originally granted on 08/07/2006. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |