FCC ID OJFMARVW2332-SMU2
802.11 A/B/G/ Access Point
by Corning Optical Communication Wireless
Grantee Code: OJF Product Code: MARVW2332SMU2
Latest application date: 2008-10-28
FCC ID Device Details
| FCC ID | OJFMARVW2332-SMU2 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | OJF |
| Product Code | MARVW2332SMU2 |
| Applicant Business | Corning Optical Communication Wireless 🇺🇸 |
| Related Domains |  corning.com |
| Equipment Class | 802.11 A/B/G/ Access Point |
| Test Firm | Israel Testing Laboratories |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: RVW2332 Grant Date: 09/12/2007 | 2008-10-28 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: RVW2332 Grant Date: 09/12/2007 | 2008-10-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2008-10-28 | PDF 212.8 KB |
| Label Location | ID Label/Location Info | 2008-10-28 | PDF 123.9 KB |
| Label Sample | ID Label/Location Info | 2008-10-28 | PDF 17.6 KB |
| Authorization Letter | Cover Letter(s) | 2008-10-28 | PDF 52.6 KB |
| Change Request Letter | Cover Letter(s) | 2008-10-28 | PDF 29.6 KB |
Application Information
| Application ID | S3Tfhy9IiZ/Fm5ihamMKDw== |
|---|---|
| Final Action Date | 2008-10-28 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: RVW2332 Grant Date: 09/12/2007 |
| Applicant FRN | 0024751430 |
| Model | MARVW2332-SMU2 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11 A/B/G/ Access Point |
| Responsible Party | Habib Riazi, Dir. RF and Systems Manager, PLM, riazih@corning.com , (703) 714-7920 |
| Test Firm | IIan Cohen, Israel Testing Laboratories, sraz@itl.co.il  , 972-3-5339022 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| S3Tfhy9IiZ/Fm5ihamMKDw== | 2008-10-28 | Change in identification of presently authorized equipment. Original FCC ID: RVW2332 Grant Date: 09/12/2007 |
| D3AWcIiS97B3YfFgQtk0Yw== | 2008-10-28 | Change in identification of presently authorized equipment. Original FCC ID: RVW2332 Grant Date: 09/12/2007 |
Equipment Authorization
Grants
TCB Grant - Application S3Tfhy9IiZ/Fm5ihamMKDw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 10/28/2008 Application Dated: 10/28/2008 |
| Corning Optical Communication Wireless |
| 13221 Woodland Park Rd |
| Suite 400 |
| Herndon, VA 20171 |
| Attention: Habib Riazi , Dir. RF and Systems Manager, PLM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFMARVW2332-SMU2 |
| Name of Grantee: | Corning Optical Communication Wireless |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 A/B/G/ Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.023 |
| Power Output listed is Conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application S3Tfhy9IiZ/Fm5ihamMKDw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Corning Optical Communication Wireless 13221 Woodland Park Rd Suite 400 Herndon, VA 20171 United States |
Date of Grant: 10/28/2008 Application Dated: 10/28/2008 |
| Attention: Habib Riazi , Dir. RF and Systems Manager, PLM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFMARVW2332-SMU2 |
| Name of Grantee: | Corning Optical Communication Wireless |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 A/B/G/ Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.023 |
| Power Output listed is Conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 10/28/2008 Application Dated: 10/27/2008 |
| Corning Optical Communication Wireless |
| 13221 Woodland Park Rd |
| Suite 400 |
| Herndon, VA 20171 |
| Attention: Habib Riazi , Dir. RF and Systems Manager, PLM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFMARVW2332-SMU2 |
| Name of Grantee: | Corning Optical Communication Wireless |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 A/B/G Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.019 |
| Power Output listed is Conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application D3AWcIiS97B3YfFgQtk0Yw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Corning Optical Communication Wireless 13221 Woodland Park Rd Suite 400 Herndon, VA 20171 United States |
Date of Grant: 10/28/2008 Application Dated: 10/27/2008 |
| Attention: Habib Riazi , Dir. RF and Systems Manager, PLM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFMARVW2332-SMU2 |
| Name of Grantee: | Corning Optical Communication Wireless |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 A/B/G Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.019 |
| Power Output listed is Conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |