FCC ID OJFRN520

OJF-RN520, OJF RN520, OJFRN520, OJFRN52O, OJFRNS20, 0JFRN520

Corning Optical Communication LLC Small Cell Radio Node RN520

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: OJFRN520 is OJF. The remaining characters of the FCC ID, RN520, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: Small Cell Radio Node

Application: Small Cell Radio Node
Equipment Class: 5GB - Part 30 Fixed Transmitter
Short Link: fcc.id/OJFRN520
Sources: FCC.gov | FCC.report
Registered By: Corning Optical Communication LLC - OJF (United States)

App #	Purpose	Date	Unique ID
1	Original Equipment	2021-05-29	e1lXHBPP7CkbINLVLpNuOQ==

Operating Frequencies

Frequency Range	Power Output	Tolerance	Emission Designator	Rule Parts	Grant Notes	Line Entry
27.5-28.35 GHz	20.23 Watts	3.66ppm	95M1G7D	3	MO	1
27.5-28.35 GHz	20.89 Watts	3.66ppm	95M6W7D	3	MO	2
27.5-28.35 GHz	21.88 Watts	3.66ppm	394MG7D	3	MO	3
27.5-28.35 GHz	21.34 Watts	3.66ppm	395MW7D	3	MO	4

Exhibits

Document	Type	Submitted Available
RF Exposure Rev	RF Exposure Info Adobe Acrobat PDF (128 kB)	2021-05-28 2021-05-29
Test Report Rev	Test Report Adobe Acrobat PDF (5290 kB)	2021-05-28 2021-05-29
User Manual Rev 3	Users Manual Adobe Acrobat PDF (1845 kB)	2021-05-10 2021-11-25
Test Report Annex D-3	Test Report Adobe Acrobat PDF (568 kB)	2021-04-23 2021-05-29
Test Report Annex D-2	Test Report Adobe Acrobat PDF (172 kB)	2021-04-23 2021-05-29
Test Report Annex D-1	Test Report Adobe Acrobat PDF (260 kB)	2021-04-23 2021-05-29
Setup Photos	Test Setup Photos Adobe Acrobat PDF (813 kB)	2021-04-23 2021-11-25
Int Photos	Internal Photos Adobe Acrobat PDF (920 kB)	2021-04-23 2021-11-25
FCC ID Label	ID Label/Location Info Adobe Acrobat PDF (227 kB)	2021-04-23 2021-05-29
Ext Photos	External Photos Adobe Acrobat PDF (354 kB)	2021-04-23 2021-11-25
Confidential Letter	Cover Letter(s) Adobe Acrobat PDF (136 kB)	2021-04-23 2021-05-29
Operation Description	Operational Description Adobe Acrobat PDF (711 kB)	2021-04-23
RF Exposure	RF Exposure Info Adobe Acrobat PDF (112 kB)	2021-04-23 2021-05-29
Block Diagram	Block Diagram Adobe Acrobat PDF (304 kB)	2021-04-23
Tune up Procedure	Parts List/Tune Up Info Adobe Acrobat PDF (1336 kB)	2021-04-23
Schematics	Schematics Adobe Acrobat PDF (3413 kB)	2021-04-23
User Manual Rev	Users Manual Adobe Acrobat PDF (511 kB)	2021-04-30 2021-11-25
Test Report	Test Report Adobe Acrobat PDF (4014 kB)	2021-04-23 2021-05-29
Parts List	Parts List/Tune Up Info Adobe Acrobat PDF (177 kB)	2021-04-23
User Manual	Users Manual Adobe Acrobat PDF (1464 kB)	2021-04-23 2021-11-25
User Manual Rev 2	Users Manual Adobe Acrobat PDF (1803 kB)	2021-05-07 2021-11-25

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	Corning Optical Communication Wireless
FCC Registration Number (FRN):	0017154329
Alphanumeric FCC ID:	OJFRN520
Unique Application Identifier:	e1lXHBPP7CkbINLVLpNuOQ==
Line one:	8253 1st Ave
City:	Vienna
State:	Virginia
Country:	United States
Zip Code:	22182

TCB Information

TCB Application Email Address:	bacl.regulatory@baclcorp.com
TCB Scope:	B4: Microwave, Millimeter Wave Band and Citizens Broadband Radio Services equipment in 47 CFR Parts 25, 30, 74, 90, 95, 96, 97, 101 (all above 3 GHz)

FCC ID

Grantee Code:	OJF
Product Code:	RN520

Person at the applicant's address to receive grant or for contact

Name:	Isaac Nissan
Title:	Director, Market Development

Telephone Number:

703-855-1773

Extension:

Fax Number:	7038480820
Email:	nissani@corning.com

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: Yes

If so, specify the short-term confidentiality release date (MM/DD/YYYY format): 11/25/2021
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: 5GB - Part 30 Fixed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	Small Cell Radio Node

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? Yes

Modular Equipment

Modular Type: Does not apply

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: Bay Area Compliance Laboratories Corporation

First Name: Lisa

Last Name: Tang

Telephone Number:

408-732-9162

Extension:

3043

Fax Number: 408 732 9164

E-mail: lisat@baclcorp.com

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power listed is maximum EIRP. This device supports 400 MHz bandwidth mode for 5G NR n261 with up to 4 component carriers. Professional installation is required. The device installation shall be restricted to premises officially designated for commercial or business use. The device must be fixed and installed to maintain a minimum of 42 cm separation from bystanders to comply with the General Population/Uncontrolled MPE limit and requirements. Installers/operators must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as permitted by FCC multi-transmitter guidance.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Isaac Nissan

Title of authorized signature:

Grants

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089

Date of Grant: 05/29/2021

Application Dated: 04/23/2021

Corning Optical Communication Wireless

8253 1st Ave

Vienna, VA 22182

Attention: Isaac Nissan , Director, Market Development

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	OJFRN520

Name of Grantee:	Corning Optical Communication Wireless

Equipment Class:	Part 30 Fixed Transmitter
Notes:	Small Cell Radio Node

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
MO	30	27500.0 - 28350.0	20.23	3.66 PM	95M1G7D
MO	30	27500.0 - 28350.0	20.89	3.66 PM	95M6W7D
MO	30	27500.0 - 28350.0	21.88	3.66 PM	394MG7D
MO	30	27500.0 - 28350.0	21.34	3.66 PM	395MW7D

Power listed is maximum EIRP. This device supports 400 MHz bandwidth mode for 5G NR n261 with up to 4 component carriers. Professional installation is required. The device installation shall be restricted to premises officially designated for commercial or business use. The device must be fixed and installed to maintain a minimum of 42 cm separation from bystanders to comply with the General Population/Uncontrolled MPE limit and requirements. Installers/operators must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as permitted by FCC multi-transmitter guidance.

MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Corning Optical Communication Wireless
8253 1st Ave
Vienna, VA 22182
United States