FCC ID OJM-HUMA-900

HumPRO-A Series High Power Data Transceiver

by Linx Technologies

Grantee Code: OJM   Product Code: HUMA900
Latest application date: 2017-03-30

Device Images

FCC ID Device Details

FCC IDOJM-HUMA-900
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeOJM
Product CodeHUMA900
Applicant BusinessLinx Technologies 🇺🇸
Related Domains linxtechnologies.com
Equipment ClassHumPRO-A Series High Power Data Transceiver
Test FirmCompatible Electronics, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.971-926.27 MHzClass II permissive change or modification of presently authorized equipment2017-03-30
902.971-926.27 MHzOriginal Equipment2017-02-22

Exhibits

DocumentTypeAvailableFile
Trace Layout ReferenceUsers Manual2017-03-30PDF 837.7 KB
User ManualUsers Manual2017-03-30PDF 2.6 MB
Trace Layout DocumentUsers Manual2017-02-22PDF 727.8 KB
User ManualUsers Manual2017-02-22PDF 2.6 MB
Internal PhotosInternal Photos2017-03-30PDF 52.9 KB
External PhotosExternal Photos2017-03-30PDF 247.1 KB
External PhotosExternal Photos2017-02-22PDF 47.6 KB
FCC ID Label and LocationID Label/Location Info2017-02-22PDF 815 KB
Test Setup PhotosTest Setup Photos2017-03-30PDF 760 KB
Test Setup PhotosTest Setup Photos2017-02-22PDF 729.4 KB
Test Report - Part 1Test Report2017-03-30PDF 3.4 MB
Test Report - Part 2Test Report2017-03-30PDF 2.8 MB
Test Report - Part 1Test Report2017-02-22PDF 5.8 MB
Test Report - Part 2Test Report2017-02-22PDF 5.7 MB
Test Report - Part 3Test Report2017-02-22PDF 1.3 MB
Appointment Letter and Anti-Drug Abuse LetterAttestation Statements2017-03-30PDF 69.2 KB
Class II Permissive Change LetterAttestation Statements2017-03-30PDF 51.2 KB
Modular Approval LetterAttestation Statements2017-03-30PDF 104.4 KB
Non-duplicate Submittal LetterAttestation Statements2017-03-30PDF 39.9 KB
Modification LetterAttestation Statements2017-02-22PDF 205.1 KB
Modular Attestation LetterAttestation Statements2017-02-22PDF 97.8 KB
Confidentiality Request LetterCover Letter(s)2017-03-30PDF 58.6 KB
Antenna Information - CW-HWRParts List/Tune Up Info2017-03-30PDF 292.6 KB
Antenna Information - uSPParts List/Tune Up Info2017-03-30PDF 1.5 MB
MPE CalculationsRF Exposure Info2017-03-30PDF 16.9 KB
MPE CalculationRF Exposure Info2017-02-22PDF 35.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 559.8 KB
Schematics Metadata onlySchematicsPDF 333.2 KB
Operational Description Metadata onlyOperational DescriptionPDF 590 KB
Operational Description - Part 1 Metadata onlyOperational DescriptionPDF 589.4 KB
Operational Description - Part 2 Metadata onlyOperational DescriptionPDF 84.9 KB

Application Information

Application IDx0lMZPW8JGZhehqYahvbdw==
Final Action Date2017-03-30
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0005915772
ModelHUMA-900
Frequency Range902.971-926.27 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionHumPRO-A Series High Power Data Transceiver
Responsible PartyShawn Hogan, VP of Engineering & Operations, shawnho@linxtechnologies.com , 541-472-3709
AgentKyle Kyle Kyle, Compatible Electronics, Inc., kyle@compatible-electronics.com , 714-579-0500
Technical ContactKyle Fujimoto, Compatible Electronics, Inc., kyle@compatible-electronics.com , 714-579-0500
Test FirmMichael Christensen, Compatible Electronics, Inc., mike@compatible-electronics.com , 714-579-0500
TCB Emailmike@compatible-electronics.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
x0lMZPW8JGZhehqYahvbdw==2017-03-30Class II permissive change or modification of presently authorized equipment
RjsYIcFfpBY18r1Q47lBAA==2017-02-22Original Equipment

Equipment Authorization

FrequencyOutputRules
902.971-926.653 MHz0.3542415C
902.971-926.27 MHz0.2307215C

Grants

TCB Grant - Application x0lMZPW8JGZhehqYahvbdw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compatible Electronics, Inc.
114 Olinda Drive
Brea, CA 92823
Date of Grant: 03/30/2017

Application Dated: 03/30/2017
Linx Technologies
159 Ort Lane
Merlin, OR 97532
 
Attention: Shawn Hogan , VP of Engineering & Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJM-HUMA-900
Name of Grantee:  Linx Technologies
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: HumPRO-A Series High Power Data Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.971  -  926.653 0.35424  
15C 902.971  -  926.27 0.23072  

Modular approval.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


EAS Grant - Application x0lMZPW8JGZhehqYahvbdw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Linx Technologies
159 Ort Lane
Merlin, OR 97532
United States
  Date of Grant: 03/30/2017

Application Dated: 03/30/2017
 
Attention: Shawn Hogan , VP of Engineering & Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJM-HUMA-900
Name of Grantee:  Linx Technologies
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: HumPRO-A Series High Power Data Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.971  -  926.653 0.35424  
15C 902.971  -  926.27 0.23072  

Modular approval.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application RjsYIcFfpBY18r1Q47lBAA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compatible Electronics, Inc.
114 Olinda Drive
Brea, CA 92823
Date of Grant: 02/22/2017

Application Dated: 02/22/2017
Linx Technologies
159 Ort Lane
Merlin, OR 97532
 
Attention: Shawn Hogan , VP of Engineering & Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJM-HUMA-900
Name of Grantee:  Linx Technologies
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: HumPRO-A Series High Power Data Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.971  -  926.653 0.35424  
15C 902.971  -  926.27 0.23072  

Modular approval. Output power is conducted.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


EAS Grant - Application RjsYIcFfpBY18r1Q47lBAA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Linx Technologies
159 Ort Lane
Merlin, OR 97532
United States
  Date of Grant: 02/22/2017

Application Dated: 02/22/2017
 
Attention: Shawn Hogan , VP of Engineering & Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJM-HUMA-900
Name of Grantee:  Linx Technologies
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: HumPRO-A Series High Power Data Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.971  -  926.653 0.35424  
15C 902.971  -  926.27 0.23072  

Modular approval. Output power is conducted.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: