FCC ID ONTJETIDC24US
Receiver/Transmitter for Radio Control Model Toys
by Esprit Model Inc.
Grantee Code: ONT Product Code: JETIDC24US
Latest application date: 2016-08-22
FCC ID Device Details
| FCC ID | ONTJETIDC24US |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | ONT |
| Product Code | JETIDC24US |
| Applicant Business | Esprit Model Inc. 🇺🇸 |
| Related Domains |  espritmodel.com |
| Equipment Class | Receiver/Transmitter for Radio Control Model Toys |
| Test Firm | TUV SUD America, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 905.967-923.966 MHz | Original Equipment | 2016-08-22 |
| 2405-2480 MHz | Original Equipment | 2016-08-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2016-08-22 | PDF 5 MB |
| Internal Photos | Internal Photos | 2016-08-22 | PDF 3.4 MB |
| External Photos | External Photos | 2016-08-22 | PDF 208.1 KB |
| Label Information | ID Label/Location Info | 2016-08-22 | PDF 253.3 KB |
| Test Setup Photos | Test Setup Photos | 2016-08-22 | PDF 1.6 MB |
| Test Report | Test Report | 2016-08-22 | PDF 662.2 KB |
| Test Report | Test Report | 2016-08-22 | PDF 2.7 MB |
| Agency Agreement | Cover Letter(s) | 2016-08-22 | PDF 242.6 KB |
| Confidentiality Request | Cover Letter(s) | 2016-08-22 | PDF 23 KB |
| FCC Cover Letter | Cover Letter(s) | 2016-08-22 | PDF 20.8 KB |
| SAR Report | RF Exposure Info | 2016-08-22 | PDF 2.4 MB |
| Block Diagram Metadata only | Block Diagram | PDF 261.2 KB | |
| Schematics Metadata only | Schematics | PDF 1.9 MB | |
| Theory of Operation Metadata only | Operational Description | PDF 1 MB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 76.2 KB |
Application Information
| Application ID | bTrUSEp9aX1hJtulkj4mag== |
|---|---|
| Final Action Date | 2016-08-22 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0021895438 |
| Model | JETIDC24US |
| Frequency Range | 905.967-923.966 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Receiver/Transmitter for Radio Control Model Toys |
| Responsible Party | Zbynek Hubacek, President, zb@espritmodel.com , 321-729-4287 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc. |
| Test Firm | Sam Wismer, TUV SUD America, Inc., swismer@tuvam.com  , 678-341-5924 |
| TCB Email | jwoods@acstestlab.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. The antenna(s) used in this device must not be co-located or operated in conjunction with any other antenna or transmitter except as described in this filing. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for body and extremity (wrist) exposure conditions are <0.10 W/kg and 0.15 W/kg, respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| bTrUSEp9aX1hJtulkj4mag== | 2016-08-22 | Original Equipment |
| SaI91z94IWUK4EKaqzz91g== | 2016-08-22 | Original Equipment |
Grants
TCB Grant - Application SaI91z94IWUK4EKaqzz91g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 08/22/2016 Application Dated: 08/22/2016 |
| Esprit Model Inc. |
| 1240 Clearmont st. NW |
| Palm Bay, FL 32905 |
| Attention: Zbynek Hubacek , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ONTJETIDC24US |
| Name of Grantee: | Esprit Model Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Receiver/Transmitter for Radio Control Model Toys |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.092 |
| Power listed is conducted. The antenna(s) used in this device must not be co-located or operated in conjunction with any other antenna or transmitter except as described in this filing. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Output power must be reduced to 7.76 mW and 2.27 mW when transmitting on 2405 MHz and 2480 MHz respectively, as described in the filing. The highest reported SAR for body and extremity (wrist) exposure conditions are 0.10 W/kg and 0.56 W/kg, respectively. |
EAS Grant - Application SaI91z94IWUK4EKaqzz91g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Esprit Model Inc. 1240 Clearmont st. NW Palm Bay, FL 32905 United States |
Date of Grant: 08/22/2016 Application Dated: 08/22/2016 |
| Attention: Zbynek Hubacek , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ONTJETIDC24US |
| Name of Grantee: | Esprit Model Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Receiver/Transmitter for Radio Control Model Toys |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.092 |
| Power listed is conducted. The antenna(s) used in this device must not be co-located or operated in conjunction with any other antenna or transmitter except as described in this filing. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Output power must be reduced to 7.76 mW and 2.27 mW when transmitting on 2405 MHz and 2480 MHz respectively, as described in the filing. The highest reported SAR for body and extremity (wrist) exposure conditions are 0.10 W/kg and 0.56 W/kg, respectively. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 08/22/2016 Application Dated: 08/22/2016 |
| Esprit Model Inc. |
| 1240 Clearmont st. NW |
| Palm Bay, FL 32905 |
| Attention: Zbynek Hubacek , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ONTJETIDC24US |
| Name of Grantee: | Esprit Model Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Receiver/Transmitter for Radio Control Model Toys |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 905.967 - 923.966 | 0.0421 |
| Power listed is conducted. The antenna(s) used in this device must not be co-located or operated in conjunction with any other antenna or transmitter except as described in this filing. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for body and extremity (wrist) exposure conditions are <0.10 W/kg and 0.15 W/kg, respectively. |
EAS Grant - Application bTrUSEp9aX1hJtulkj4mag==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Esprit Model Inc. 1240 Clearmont st. NW Palm Bay, FL 32905 United States |
Date of Grant: 08/22/2016 Application Dated: 08/22/2016 |
| Attention: Zbynek Hubacek , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ONTJETIDC24US |
| Name of Grantee: | Esprit Model Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Receiver/Transmitter for Radio Control Model Toys |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 905.967 - 923.966 | 0.0421 |
| Power listed is conducted. The antenna(s) used in this device must not be co-located or operated in conjunction with any other antenna or transmitter except as described in this filing. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for body and extremity (wrist) exposure conditions are <0.10 W/kg and 0.15 W/kg, respectively. |
| Mail To: |