FCC ID OQA-AUBGM240P32
Transceiver Unit
by Autec s.r.l.
Grantee Code: OQA Product Code: AUBGM240P32
Latest application date: 2026-04-23
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2404-2478 MHz | Class II permissive change or modification of presently authorized equipment | 2026-04-23 |
| 2405-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2026-04-23 |
| 2404-2478 MHz | Change in identification of presently authorized equipment. Original FCC ID: QOQ-GM240P Grant Date: 08/26/2022 | 2026-02-13 |
| 2405-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: QOQ-GM240P Grant Date: 08/26/2022 | 2026-02-13 |
Exhibits
Application Information
| Application ID | LsELQPM8XxjA+HZEpvCANQ== |
|---|---|
| Final Action Date | 2026-04-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011117231 |
| Model | AUBGM240P32 |
| Frequency Range | 2404-2478 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Transceiver Unit |
| Responsible Party | Antonio Silvestri, asilvestri@autec.it  , +39-0444-901085 |
| Non-Technical Contact | Fabio Carraro, Autec North America, LLC, fabio.carraro@dekra.com  , 844-865-1791 |
| Test Firm | Francesco Boschiero, Dekra Testing and Certification S.r.l., francesco.boschiero@dekra.com , 39-0445-367702 |
| TCB Email | admin.rcb.es@dekra.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Long-Term Confidentiality | Yes |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| LsELQPM8XxjA+HZEpvCANQ== | 2026-04-23 | Class II permissive change or modification of presently authorized equipment |
| 7Mk+dEw32I/i9rZvkXadtg== | 2026-04-23 | Class II permissive change or modification of presently authorized equipment |
| xt8sd+wwfTAKBqZZa/XR6g== | 2026-02-13 | Change in identification of presently authorized equipment. Original FCC ID: QOQ-GM240P Grant Date: 08/26/2022 |
| Db1S+R5e3JqjYlyE2KI/xg== | 2026-02-13 | Change in identification of presently authorized equipment. Original FCC ID: QOQ-GM240P Grant Date: 08/26/2022 |
Equipment Authorization
Grants
TCB Grant - Application xt8sd+wwfTAKBqZZa/XR6g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
DEKRA Testing and Certification, S.A.U. Parque Tecnologico de Andalucia, Calle Severo Ochoa 2 y 6 Campanillas - Malaga, 29590 Spain |
Date of Grant: 02/13/2026 Application Dated: 02/12/2026 |
| Autec s.r.l. |
| Via Pomaroli, 65 |
| Caldogno (VI), 36030 Italy |
| Attention: Antonio Silvestri , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OQA-AUBGM240P32 |
| Name of Grantee: | Autec s.r.l. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Transceiver Unit |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.096 | 1M05F1D | ||
| 15C | 2404.0 - 2478.0 | 0.097 | 2M06F1D |
| Power listed is maximum conducted output power. Single modular approval for portable use. To meet the SAR exemption for portable conditions, the minimum separation distance must be 33.9 mm. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. For portable configurations, this device must be installed to provide the minimum separation distance specified in the filing to meet the SAR exemption threshold listed in KDB 447498. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Variants of the module without an integral antenna must be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
TCB Grant - Application LsELQPM8XxjA+HZEpvCANQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
DEKRA Testing and Certification, S.A.U. Parque Tecnologico de Andalucia, Calle Severo Ochoa 2 y 6 Campanillas - Malaga, 29590 Spain |
Date of Grant: 04/23/2026 Application Dated: 04/23/2026 |
| Autec s.r.l. |
| Via Pomaroli, 65 |
| Caldogno (VI), 36030 Italy |
| Attention: Antonio Silvestri , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OQA-AUBGM240P32 |
| Name of Grantee: | Autec s.r.l. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Transceiver Unit |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.096 | 1M05F1D | ||
| 15C | 2404.0 - 2478.0 | 0.097 | 2M06F1D |
| The present certification is a C2PC due to add one new additional antenna and reduce the separation distance. Power listed is maximum conducted output power. Single modular approval for portable use. To meet the SAR exemption for portable conditions, the minimum separation distance must be 5mm for limb-worn conditions and 10mm for head and trunk. For portable configurations, this device must be installed to provide the minimum separation distance specified in the filing to meet the SAR exemption threshold listed in KDB 447498. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Variants of the module without an integral antenna must be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
TCB Grant - Application Db1S+R5e3JqjYlyE2KI/xg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
DEKRA Testing and Certification, S.A.U. Parque Tecnologico de Andalucia, Calle Severo Ochoa 2 y 6 Campanillas - Malaga, 29590 Spain |
Date of Grant: 02/13/2026 Application Dated: 02/12/2026 |
| Autec s.r.l. |
| Via Pomaroli, 65 |
| Caldogno (VI), 36030 Italy |
| Attention: Antonio Silvestri , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OQA-AUBGM240P32 |
| Name of Grantee: | Autec s.r.l. |
| Equipment Class: | Digital Transmission System |
| Notes: | Transceiver Unit |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.096 | 1M05F1D | ||
| 15C | 2404.0 - 2478.0 | 0.097 | 2M06F1D | ||
| 15C | 2405.0 - 2480.0 | 0.096 | 2M24G1D |
| Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions or portable use when SAR exemption applies. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. For portable configurations, this device must be installed to provide the minimum separation distance specified in the filing to meet the SAR exemption threshold listed in KDB 447498. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Variants of the module without an integral antenna must be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
TCB Grant - Application 7Mk+dEw32I/i9rZvkXadtg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
DEKRA Testing and Certification, S.A.U. Parque Tecnologico de Andalucia, Calle Severo Ochoa 2 y 6 Campanillas - Malaga, 29590 Spain |
Date of Grant: 04/23/2026 Application Dated: 04/23/2026 |
| Autec s.r.l. |
| Via Pomaroli, 65 |
| Caldogno (VI), 36030 Italy |
| Attention: Antonio Silvestri , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OQA-AUBGM240P32 |
| Name of Grantee: | Autec s.r.l. |
| Equipment Class: | Digital Transmission System |
| Notes: | Transceiver Unit |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.096 | 1M05F1D | ||
| 15C | 2404.0 - 2478.0 | 0.097 | 2M06F1D | ||
| 15C | 2405.0 - 2480.0 | 0.096 | 2M24G1D |
| The present certification is a C2PC due to add one new additional antenna and reduce the separation distance. Power listed is maximum conducted output power. Single modular approval for portable use. To meet the SAR exemption for portable conditions, the minimum separation distance must be 5mm for limb-worn conditions and 10mm for head and trunk. For portable configurations, this device must be installed to provide the minimum separation distance specified in the filing to meet the SAR exemption threshold listed in KDB 447498. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Variants of the module without an integral antenna must be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |