FCC ID ORV-FCGS
Flexcat Pod
by Lightspeed Technologies Inc.
Grantee Code: ORV Product Code: FCGS
Latest application date: 2015-01-12
FCC ID Device Details
| FCC ID | ORV-FCGS |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | ORV |
| Product Code | FCGS |
| Applicant Business | Lightspeed Technologies Inc. 🇺🇸 |
| Related Domains |  lightspeed-tek.com |
| Equipment Class | Flexcat Pod |
| Test Firm | Electronics Testing Center, Taiwan |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 1921.536-1928.448 MHz | Class II permissive change or modification of presently authorized equipment | 2015-01-12 |
| 1921.536-1928.448 MHz | Original Equipment | 2011-12-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2015-01-12 | PDF 5.6 MB |
| User Manual | Users Manual | 2011-12-08 | PDF 2.7 MB |
| Internal Photos | Internal Photos | 2015-01-12 | PDF 436.9 KB |
| Internal Photos | Internal Photos | 2011-12-08 | PDF 412.7 KB |
| External Photos | External Photos | 2015-01-12 | PDF 228.2 KB |
| External Photos | External Photos | 2011-12-08 | PDF 156.7 KB |
| Label Info | ID Label/Location Info | 2015-01-12 | PDF 62.5 KB |
| Label Location | ID Label/Location Info | 2015-01-12 | PDF 4.5 MB |
| Label Artwork and Location | ID Label/Location Info | 2011-12-08 | PDF 381.9 KB |
| Test Setup Photos | Test Setup Photos | 2015-01-12 | PDF 297.3 KB |
| Radiated & Conducted Emission for Base | Test Setup Photos | 2011-12-08 | PDF 116.1 KB |
| Test Report 1 | Test Report | 2015-01-12 | PDF 1.6 MB |
| Test Report 2 | Test Report | 2015-01-12 | PDF 744.5 KB |
| Bandwith Plot | Test Report | 2011-12-08 | PDF 46 KB |
| Inband | Test Report | 2011-12-08 | PDF 41 KB |
| Test Report | Test Report | 2011-12-08 | PDF 436 KB |
| peaktp | Test Report | 2011-12-08 | PDF 54.3 KB |
| psd | Test Report | 2011-12-08 | PDF 40.1 KB |
| UTAM | Attestation Statements | 2011-12-08 | PDF 185.2 KB |
| Authorization Letter | Cover Letter(s) | 2015-01-12 | PDF 45.3 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2015-01-12 | PDF 67.8 KB |
| Confidentiality Letter | Cover Letter(s) | 2015-01-12 | PDF 64.5 KB |
| Confidentiality Request | Cover Letter(s) | 2011-12-08 | PDF 169.8 KB |
| Declaration Letter | Cover Letter(s) | 2011-12-08 | PDF 39.2 KB |
| Letter of Agency | Cover Letter(s) | 2011-12-08 | PDF 419 KB |
| RF Exposure Info | RF Exposure Info | 2015-01-12 | PDF 13.3 KB |
| RF Exposure info | RF Exposure Info | 2011-12-08 | PDF 19.8 KB |
| Block Diagram Metadata only | Block Diagram | PDF 90.4 KB | |
| Schematics Metadata only | Schematics | PDF 237.4 KB | |
| Antenna Specification Operational Description Metadata only | Operational Description | PDF 70.5 KB |
Application Information
| Application ID | l6uVRkYSnwudnJw19aq6ew== |
|---|---|
| Final Action Date | 2015-01-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006242663 |
| Model | FCGS |
| Frequency Range | 1921.536-1928.448 MHz |
| Equipment Class | PUB - Part 15 Unlicensed PCS Base Station |
| Device Description | Flexcat Pod |
| Responsible Party | Mike Frost, Senior Engineer, mike.frost@lightspeed-tek.com , 503-684-5538 |
| Test Firm | Winpo Tsai, Electronics Testing Center, Taiwan, winpo@etc.org.tw  , 886-3-3280026 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A3: Unlicensed Personal Communication System (PCS) devices |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 12/08/2011) Class II permissive Change: this Class II Permissive Change is for an antenna change, printed circuit board change, hardware change, and software change. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| l6uVRkYSnwudnJw19aq6ew== | 2015-01-12 | Class II permissive change or modification of presently authorized equipment |
| SsoJBWGOja6wcmJUXNj7Ag== | 2011-12-08 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application SsoJBWGOja6wcmJUXNj7Ag==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 12/08/2011 Application Dated: 12/08/2011 |
| Lightspeed Technologies Inc. |
| 11509 SW Herman Rd |
| Tualatin, OR 97062 |
| Attention: Mike Frost , Senior Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ORV-FCGS |
| Name of Grantee: | Lightspeed Technologies Inc. |
| Equipment Class: | Part 15 Unlicensed PCS Base Station |
| Notes: | 1.9GHz DECT Student Group Speaker |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15D | 1921.536 - 1928.448 | 0.025 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application SsoJBWGOja6wcmJUXNj7Ag==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lightspeed Technologies Inc. 11509 SW Herman Rd Tualatin, OR 97062 United States |
Date of Grant: 12/08/2011 Application Dated: 12/08/2011 |
| Attention: Mike Frost , Senior Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ORV-FCGS |
| Name of Grantee: | Lightspeed Technologies Inc. |
| Equipment Class: | Part 15 Unlicensed PCS Base Station |
| Notes: | 1.9GHz DECT Student Group Speaker |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15D | 1921.536 - 1928.448 | 0.025 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 01/12/2015 Application Dated: 01/12/2015 |
| Lightspeed Technologies Inc. |
| 11509 SW Herman Rd |
| Tualatin, OR 97062 |
| Attention: Mike Frost , Senior Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ORV-FCGS |
| Name of Grantee: | Lightspeed Technologies Inc. |
| Equipment Class: | Part 15 Unlicensed PCS Base Station |
| Notes: | Flexcat Pod |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15D | 1921.536 - 1928.448 | 0.0246 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 12/08/2011) Class II permissive Change: this Class II Permissive Change is for an antenna change, printed circuit board change, hardware change, and software change. |
EAS Grant - Application l6uVRkYSnwudnJw19aq6ew==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lightspeed Technologies Inc. 11509 SW Herman Rd Tualatin, OR 97062 United States |
Date of Grant: 01/12/2015 Application Dated: 01/12/2015 |
| Attention: Mike Frost , Senior Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ORV-FCGS |
| Name of Grantee: | Lightspeed Technologies Inc. |
| Equipment Class: | Part 15 Unlicensed PCS Base Station |
| Notes: | Flexcat Pod |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15D | 1921.536 - 1928.448 | 0.0246 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 12/08/2011) Class II permissive Change: this Class II Permissive Change is for an antenna change, printed circuit board change, hardware change, and software change. |
| Mail To: |