FCC ID OSZ38001M

2.4 GHz 802.11g WLAN MiniPCI card

by Conexant Systems Inc.

Grantee Code: OSZ   Product Code: 38001M
Latest application date: 2003-08-06

FCC ID Device Details

FCC IDOSZ38001M
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeOSZ
Product Code38001M
Applicant BusinessConexant Systems Inc. 🇺🇸
Related Domains globespanvirata.com intersil.com
Equipment Class2.4 GHz 802.11g WLAN MiniPCI card
Test FirmTUV Rheinland Nederland B.V.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2003-08-06
2412-2462 MHzOriginal Equipment2003-05-22

Exhibits

DocumentTypeAvailableFile
OEM Installation manualUsers Manual2003-05-22PDF 550.6 KB
Internal PhotosInternal Photos2003-08-06PDF 576.4 KB
Internal photosInternal Photos2003-05-22PDF 474.5 KB
External PhotosExternal Photos2003-08-06PDF 863 KB
External photos miniPCI cardExternal Photos2003-05-22PDF 474.5 KB
Notebook Antenna photosExternal Photos2003-05-22PDF 506.4 KB
Label InfoID Label/Location Info2003-08-06PDF 217.6 KB
label and location infoID Label/Location Info2003-05-22PDF 196.3 KB
Test Setup PhotosTest Setup Photos2003-08-06PDF 581.5 KB
Test Setup photosTest Setup Photos2003-05-22PDF 633.5 KB
Test ReportTest Report2003-08-06PDF 470.2 KB
SAR Test report Part 1RF Exposure Info2003-05-22PDF 1.8 MB
SAR Test report Part 2RF Exposure Info2003-05-22PDF 1.6 MB
Test reportTest Report2003-05-22PDF 823.9 KB
Authorization LetterCover Letter(s)2003-08-06PDF 28.7 KB
Confidentiality RequestCover Letter(s)2003-08-06PDF 155.9 KB
Cover LetterCover Letter(s)2003-08-06PDF 67.5 KB
Similarities and DifferencesCover Letter(s)2003-08-06PDF 56 KB
Authorization letterCover Letter(s)2003-05-22PDF 28.7 KB
Confidentiality requestCover Letter(s)2003-05-22PDF 63.6 KB
Cover letterCover Letter(s)2003-05-22PDF 65 KB
Block Diagram Metadata onlyBlock DiagramPDF 7.5 KB
Block diagram Metadata onlyBlock DiagramPDF 7.3 KB
Circuit Diagram Metadata onlySchematicsPDF 653.2 KB
Schematics Metadata onlySchematicsPDF 595.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 9.2 KB
Theory of operation Metadata onlyOperational DescriptionPDF 8.9 KB
Bill of Materials Metadata onlyParts List/Tune Up InfoPDF 30.5 KB
Bill of Materials Metadata onlyParts List/Tune Up InfoPDF 23.3 KB

Application Information

Application IDstXarxvUdGIVM/EHrjLBKQ==
Final Action Date2003-08-06
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0003781366
Model38001M
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description2.4 GHz 802.11g WLAN MiniPCI card
Responsible PartyDerick Sariredjo, dsariredjo@globespanvirata.com , +31-30-2259742
AgentPieter Pieter Pieter, TNO Electronic Producs & Services (EPS) B.V., robben@eps.tno.nl , +31 594 505005
Technical ContactPieter Robben, TNO Electronic Products & Services (EPS) B.V,, robben@eps.tno.nl , +31 594 505005
Non-Technical ContactDerick Sariedjo, Intersil Corporation, derick.sariedjo@intersil.com , +31 30 225 9742
Test FirmTies E. T Koning, TUV Rheinland Nederland B.V., ties.koning@nl.tuv.com , 31-594-505-005
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host devices. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. Maximum measured SAR value: 0.139 W/kg (Body)

Applications

Application IDDatePurpose
stXarxvUdGIVM/EHrjLBKQ==2003-08-06Class II permissive change or modification of presently authorized equipment
qFaPP1uIbcm+ziOF0Emmkw==2003-05-22Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.078000015CCE

Grants

TCB Grant - Application stXarxvUdGIVM/EHrjLBKQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 08/06/2003

Application Dated: 08/06/2003
Conexant Systems Inc.
100 Schultz Drive
Corporate Headquarters
Red Bank, NJ 07701
 
Attention: Derick Sariredjo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OSZ38001M
Name of Grantee:  Conexant Systems Inc.
Equipment Class: Digital Transmission System
Notes: 2.4 GHz 802.11g WLAN MiniPCI card
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.078  

Power output listed is conducted. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host devices. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. Maximum measured SAR value: 0.139 W/kg (Body)

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application stXarxvUdGIVM/EHrjLBKQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Conexant Systems Inc.
100 Schultz Drive Corporate Headquarters
Red Bank, NJ 07701
United States
  Date of Grant: 08/06/2003

Application Dated: 08/06/2003
 
Attention: Derick Sariredjo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OSZ38001M
Name of Grantee:  Conexant Systems Inc.
Equipment Class: Digital Transmission System
Notes: 2.4 GHz 802.11g WLAN MiniPCI card
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.078  

Power output listed is conducted. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host devices. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. Maximum measured SAR value: 0.139 W/kg (Body)


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application qFaPP1uIbcm+ziOF0Emmkw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 05/22/2003

Application Dated: 05/22/2003
Conexant Systems Inc.
100 Schultz Drive
Corporate Headquarters
Red Bank, NJ 07701
 
Attention: Derick Sariredjo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OSZ38001M
Name of Grantee:  Conexant Systems Inc.
Equipment Class: Digital Transmission System
Notes: 2.4 GHz 802.11g WLAN MiniPCI card
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.078  

Power output listed is conducted. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host devices. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. Maximum measured SAR value: 0.139 W/kg (Body)

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application qFaPP1uIbcm+ziOF0Emmkw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Conexant Systems Inc.
100 Schultz Drive Corporate Headquarters
Red Bank, NJ 07701
United States
  Date of Grant: 05/22/2003

Application Dated: 05/22/2003
 
Attention: Derick Sariredjo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OSZ38001M
Name of Grantee:  Conexant Systems Inc.
Equipment Class: Digital Transmission System
Notes: 2.4 GHz 802.11g WLAN MiniPCI card
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.078  

Power output listed is conducted. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host devices. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. Maximum measured SAR value: 0.139 W/kg (Body)


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: