FCC ID OU52102462001

RFID Module

by GE Medical Systems Information Technologies Inc.

Grantee Code: OU5   Product Code: 2102462001
Latest application date: 2018-08-07

FCC ID Device Details

FCC IDOU52102462001
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeOU5
Product Code2102462001
Applicant BusinessGE Medical Systems Information Technologies Inc. 🇺🇸
Related Domains med.ge.com
Equipment ClassRFID Module
Test FirmLaird Connectivity, Inc

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
0.125 MHzClass II permissive change or modification of presently authorized equipment2018-08-07
0.125 MHzChange in identification of presently authorized equipment. Original FCC ID: M9MOEM805NX Grant Date: 11/02/20122017-09-13

Exhibits

DocumentTypeAvailableFile
Host Internal PhotosInternal Photos2018-08-07PDF 2.2 MB
Host External PhotosExternal Photos2018-08-07PDF 2.3 MB
External PhotosExternal Photos2017-09-13PDF 443.6 KB
Host Labeling InfoID Label/Location Info2018-08-07PDF 171.7 KB
Label and LocationID Label/Location Info2017-09-13PDF 107.6 KB
Test Photos RevisedTest Setup Photos2018-08-07PDF 417.5 KB
Test Report V4Test Report2018-08-07PDF 1.9 MB
Co-located TX AttestationsAttestation Statements2018-08-07PDF 18.6 KB
FCC Agency LetterCover Letter(s)2018-08-07PDF 17.7 KB
PC Letter Metadata onlyCover Letter(s)2018-08-07PDF 64.8 KB
PC Letter V3Cover Letter(s)2018-08-07PDF 74.7 KB
Agent AuthCover Letter(s)2017-09-13PDF 17.7 KB
Change In ID Auth LetterCover Letter(s)2017-09-13PDF 193.5 KB
Change In ID LetterCover Letter(s)2017-09-13PDF 18.4 KB
RF Exposure V7RF Exposure Info2018-08-07PDF 871.8 KB

Application Information

Application IDWQRpqO9dDUWmDPQnSDC74w==
Final Action Date2018-08-07
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0017065665
Model2102462001
Frequency Range0.125 MHz
Equipment ClassDXX - Part 15 Low Power Communication Device Transmitter
Device DescriptionRFID Module
Responsible PartyMike Steinike, Lead System Designer-RF, michael.steinike@med.ge.com , 414-362-2417
AgentThomas Thomas Thomas, Laird Technologies Inc, Tom.Smith@lairdtech.com , 2624214986
Technical ContactMichael Steinike, GE Medical Systems Information Technologies, Michael.Steinike@med.ge.com , 414.362.2417
Test FirmAdam Alger, Laird Connectivity, Inc, adam.alger@lairdconnect.com , 262 375 3091
TCB Emailhotline@acbcert.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsThis device is allowed only for OEM integration into their enclosure. This grant is valid only when the device is sold to OEM or OEM intergrators. OEM integrator is responsible for complying with the instructions and requirements for the housing enclosure. OEM integrators are instructed to ensure that the end use has no manual instructions to remove or install the device. This change is to add LMA approval in host as specified within this application.

Applications

Application IDDatePurpose
WQRpqO9dDUWmDPQnSDC74w==2018-08-07Class II permissive change or modification of presently authorized equipment
pRYp0to8QrHnZ3Q154vCNQ==2017-09-13Change in identification of presently authorized equipment. Original FCC ID: M9MOEM805NX Grant Date: 11/02/2012

Equipment Authorization

FrequencyRules
0.125 MHz15C
13.56 MHz15C

Grants

TCB Grant - Application WQRpqO9dDUWmDPQnSDC74w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 08/07/2018

Application Dated: 05/29/2018
GE Medical Systems Information Technologies Inc.
8200 West Tower avenue
Milwaukee, WI 53223
 
Attention: Mike Steinike , Lead System Designer-RF

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU52102462001
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 0.125  -  0.125  
15C 13.56  -  13.56  

This device is allowed only for OEM integration into their enclosure. This grant is valid only when the device is sold to OEM or OEM intergrators. OEM integrator is responsible for complying with the instructions and requirements for the housing enclosure. OEM integrators are instructed to ensure that the end use has no manual instructions to remove or install the device.

This change is to add LMA approval in host as specified within this application.


EAS Grant - Application WQRpqO9dDUWmDPQnSDC74w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

GE Medical Systems Information Technologies Inc.
8200 West Tower avenue
Milwaukee, WI 53223
United States
  Date of Grant: 08/07/2018

Application Dated: 05/29/2018
 
Attention: Mike Steinike , Lead System Designer-RF

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU52102462001
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 0.125  -  0.125  
15C 13.56  -  13.56  

This device is allowed only for OEM integration into their enclosure. This grant is valid only when the device is sold to OEM or OEM intergrators. OEM integrator is responsible for complying with the instructions and requirements for the housing enclosure. OEM integrators are instructed to ensure that the end use has no manual instructions to remove or install the device.

This change is to add LMA approval in host as specified within this application.



TCB Grant - Application pRYp0to8QrHnZ3Q154vCNQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/13/2017

Application Dated: 09/12/2017
GE Medical Systems Information Technologies Inc.
8200 West Tower avenue
Milwaukee, WI 53223
 
Attention: Mike Steinike , Lead System Designer-RF

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU52102462001
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: RFID Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 0.125  -  0.125  
15C 13.56  -  13.56  

This device is allowed only for OEM integration into their enclosure. This grant is valid only when the device is sold to OEM or OEM integrators. OEM integrator is responsible for complying with the instructions and requirements for the housing enclosure. OEM integrators are instructed to ensure that the end use has no manual instructions to remove or install the device.

EAS Grant - Application pRYp0to8QrHnZ3Q154vCNQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

GE Medical Systems Information Technologies Inc.
8200 West Tower avenue
Milwaukee, WI 53223
United States
  Date of Grant: 09/13/2017

Application Dated: 09/12/2017
 
Attention: Mike Steinike , Lead System Designer-RF

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU52102462001
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: RFID Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 0.125  -  0.125  
15C 13.56  -  13.56  

This device is allowed only for OEM integration into their enclosure. This grant is valid only when the device is sold to OEM or OEM integrators. OEM integrator is responsible for complying with the instructions and requirements for the housing enclosure. OEM integrators are instructed to ensure that the end use has no manual instructions to remove or install the device.



Mail To: