FCC ID OU5MULW01

WLAN Module

by GE Medical Systems Information Technologies Inc.

Grantee Code: OU5   Product Code: MULW01
Latest application date: 2025-08-20

FCC ID Device Details

FCC IDOU5MULW01
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeOU5
Product CodeMULW01
Applicant BusinessGE Medical Systems Information Technologies Inc. 🇺🇸
Related Domains gehealthcare.com sgs.com
Equipment ClassWLAN Module
Test FirmCompliance Certification Services (Kunshan) Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2025-08-20
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-08-20
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-08-20
2422-2452 MHzClass II permissive change or modification of presently authorized equipment2025-06-28
5755-5795 MHzClass II permissive change or modification of presently authorized equipment2025-06-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-06-28
5755-5795 MHzClass II permissive change or modification of presently authorized equipment2025-06-05
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-06-05
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-06-05
5180-5240 MHzOriginal Equipment2024-10-30
2402-2480 MHzOriginal Equipment2024-10-30
2402-2480 MHzOriginal Equipment2024-10-30

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2026-02-16PDF 5.8 MB
User Manual_part1Users Manual2025-12-25PDF 5.5 MB
User Manual_part2Users Manual2025-12-25PDF 3.2 MB
User ManualUsers Manual2025-12-02PDF 1.5 MB
User ManualUsers Manual2025-04-28PDF 1.4 MB
Internal PhotoInternal Photos2026-02-16PDF 1.9 MB
Internal PhotosInternal Photos2025-12-25PDF 3 MB
Internal photoInternal Photos2025-12-02PDF 1.1 MB
Internal photoInternal Photos2025-04-28PDF 717.2 KB
External photoExternal Photos2026-02-16PDF 448.1 KB
External PhotosExternal Photos2025-12-25PDF 423.7 KB
External photoExternal Photos2025-12-02PDF 415.1 KB
External photoExternal Photos2025-04-28PDF 330.5 KB
LabelID Label/Location Info2025-08-20PDF 186.1 KB
LabelID Label/Location Info2025-06-28PDF 58.4 KB
LabelID Label/Location Info2025-06-05PDF 43.7 KB
LabelID Label/Location Info2024-10-30PDF 240.2 KB
Appendix D PhotographsTest Setup Photos2025-12-25PDF 385.8 KB
Test setup photoTest Setup Photos2025-12-02PDF 193 KB
Test setup photosTest Setup Photos2025-04-28PDF 196.1 KB
Antenna Data Sheet for ANT1Test Report2025-08-20PDF 2.3 MB
Antenna Data Sheet for ANT2Test Report2025-08-20PDF 2.1 MB
Test report for SARRF Exposure Info2025-08-20PDF 2.3 MB
Antenna Data SheetTest Report2025-06-28PDF 2.3 MB
Appendix A Detailed System Check ResultsTest Report2025-06-28PDF 480 KB
Appendix B Detailed Test ResultsTest Report2025-06-28PDF 683.9 KB
Appendix C Calibration certificateTest Report2025-06-28PDF 2.2 MB
Appendix E Conducted RF Output PowerTest Report2025-06-28PDF 260.1 KB
Test report for 2.4G WiFiTest Report2025-06-05PDF 1.1 MB
Test report for 5GWiFiTest Report2025-06-05PDF 1.8 MB
Test report for BLETest Report2025-06-05PDF 738.1 KB
Test report for BTTest Report2025-06-05PDF 979.2 KB
Antenna Data Sheet for ANT1Test Report2024-10-30PDF 2.3 MB
Antenna Data Sheet for ANT2Test Report2024-10-30PDF 2.1 MB
Test Report for 2.4G WiFi_part1Test Report2024-10-30PDF 5 MB
Test Report for 2.4G WiFi_part2Test Report2024-10-30PDF 3.1 MB
Test Report for 5G WiFi_part1Test Report2024-10-30PDF 4.6 MB
Test Report for 5G WiFi_part2Test Report2024-10-30PDF 5.5 MB
Test Report for 5G WiFi_part3Test Report2024-10-30PDF 5.4 MB
Test report for BLETest Report2024-10-30PDF 2.9 MB
Test report for BTTest Report2024-10-30PDF 5.2 MB
Test report for DFSTest Report2024-10-30PDF 605.3 KB
FCC_U.S. agent LetterAttestation Statements2025-08-20PDF 1,011.2 KB
QSF27-14-04_Rev1.0_Applicant_Declaration_LetterAttestation Statements2025-08-20PDF 1.5 MB
Applicant_Declaration_LetterAttestation Statements2025-06-28PDF 790.2 KB
FCC-CoverList-AttestationAttestation Statements2025-06-28PDF 1.2 MB
QSF27-14-04_Rev1.0_Applicant_Declaration_LetterAttestation Statements2025-06-05PDF 790.2 KB
QSF27-14-04_Rev1.0_Applicant_Declaration_LetterAttestation Statements2024-10-30PDF 1.4 MB
Auth LetterCover Letter(s)2025-08-20PDF 637.3 KB
Confidentiality_request_long&short termCover Letter(s)2025-08-20PDF 84.8 KB
E Label declaration letterCover Letter(s)2025-08-20PDF 489.2 KB
FCC_Class II Permissive Change RequestCover Letter(s)2025-08-20PDF 565.9 KB
FCC_Class II Permissive Change RequestCover Letter(s)2025-06-28PDF 30.3 KB
FCC_Confidentiality_requestCover Letter(s)2025-06-28PDF 92.1 KB
FCC_agent_auth_letterCover Letter(s)2025-06-28PDF 641 KB
Auth letterCover Letter(s)2025-06-05PDF 641 KB
Confidentiality_request long&short termCover Letter(s)2025-06-05PDF 63.4 KB
FCC_Class II Permissive Change RequestCover Letter(s)2025-06-05PDF 696.9 KB
Auth letterCover Letter(s)2024-10-30PDF 645.7 KB
Confidentiality_long&short term requestCover Letter(s)2024-10-30PDF 117.8 KB
FCC_Modular Cover letterCover Letter(s)2024-10-30PDF 1.7 MB
FCC SAR_ReportRF Exposure Info2025-06-28PDF 1.6 MB
MPERF Exposure Info2025-06-05PDF 449.9 KB
MPERF Exposure Info2024-10-30PDF 461.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 307.8 KB
Block diagram Metadata onlyBlock DiagramPDF 168.8 KB
Bolck diagram Metadata onlyBlock DiagramPDF 320.8 KB
Schematics Metadata onlySchematicsPDF 4.4 MB
Schematics Metadata onlySchematicsPDF 751 KB
Schematics Metadata onlySchematicsPDF 2.8 MB
Operational description Metadata onlyOperational DescriptionPDF 83.4 KB
Operational description Metadata onlyOperational DescriptionPDF 76.5 KB
NII Software Security Info Metadata onlySDR Software/Security Info.PDF 4.7 MB
Tune up Metadata onlyParts List/Tune Up InfoPDF 97.3 KB
Tune up Metadata onlyParts List/Tune Up InfoPDF 34.7 KB

Application Information

Application IDPMCuMBVqAljr6fvzoLa5Fw==
Final Action Date2025-08-20
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0017065665
ModelMULW01
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWLAN Module
Responsible PartyMatthew R Pekarske, Principal of Connectivity and Service Technology, matthew.pekarske@gehealthcare.com , 414-526-7391
AgentParlam Parlam Parlam, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , 02161915666
Technical ContactParlam Zhan, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , 02161915666
Non-Technical ContactParlam Zhan, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , 02161915666
Test FirmJessica Chen, Compliance Certification Services (Kunshan) Inc., Jessica.chen1@sgs.com , 86-0512-57355888
TCB EmailUSCTS.TCB@SGS.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date02/16/2026
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 5.71 dBi for antenna port 1 and 2.97dBi for antenna port 2 for satisfying RF exposure compliance according to as defined in 2.1091. This device has a 20 MHz, 40 MHz bandwidth mode. Class II permissive change to integrate the module into the portable host (Manufacturer: GE Healthcare Finland oy, Model: Carescape ONE). The highest reported SAR values for extremity and simultaneous transmission use conditions are 0.68 W/kg and 0.81 W/kg, respectively.

Applications

Application IDDatePurpose
PMCuMBVqAljr6fvzoLa5Fw==2025-08-20Class II permissive change or modification of presently authorized equipment
6D6eEPL3MgLTyvS1Y3VxOw==2025-08-20Class II permissive change or modification of presently authorized equipment
3FnzAL4AG27ttWr5nhPVRQ==2025-08-20Class II permissive change or modification of presently authorized equipment
p48Ed24UsMOgRtNuJ/iGtw==2025-06-28Class II permissive change or modification of presently authorized equipment
k7yX7w2b55ysdKyya2obRw==2025-06-28Class II permissive change or modification of presently authorized equipment
VOHu8tsiF/DEmy3d8/Nyjw==2025-06-28Class II permissive change or modification of presently authorized equipment
HGCS73/7HZvig7VI0WKuWg==2025-06-05Class II permissive change or modification of presently authorized equipment
DnlbDT4pxF8VtNM7ywEtIw==2025-06-05Class II permissive change or modification of presently authorized equipment
1VzpoYZfKsAUp/hun2hFhg==2025-06-05Class II permissive change or modification of presently authorized equipment
cRy/pIxKJ/w/U2xI0gcGkw==2024-10-30Original Equipment
ZQGR+qGnNXKqlrtWIP0hyA==2024-10-30Original Equipment
W390MEMjOSW1lbIth4xFLw==2024-10-30Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.005000015CCC
2402-2480 MHz0.000815CCC
2402-2480 MHz0.0050000CC
2402-2480 MHz0.0008CC
2412-2462 MHz0.02715CCC, MO
2412-2462 MHz0.027CC, MO
2422-2452 MHz0.02215CCC
2422-2452 MHz0.022CC
5180-5240 MHz0.02115ECC
5180-5240 MHz0.021CC
5190-5230 MHz0.01815ECC
5190-5230 MHz0.018CC
5260-5320 MHz0.01315ECC, ND
5260-5320 MHz0.013CC, ND
5270-5310 MHz0.01515ECC, ND
5270-5310 MHz0.015CC, ND
5500-5700 MHz0.00915ECC, ND
5500-5700 MHz0.009CC, ND
5510-5670 MHz0.00715ECC, ND
5510-5670 MHz0.007CC, ND
5745-5825 MHz0.0115ECC
5745-5825 MHz0.01CC
5755-5795 MHz0.00915ECC
5755-5795 MHz0.009CC

Grants

TCB Grant - Application ZQGR+qGnNXKqlrtWIP0hyA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 10/30/2024

Application Dated: 10/30/2024
GE Medical Systems Information Technologies Inc.
8200 West Tower avenue
Milwaukee, WI 53223
 
Attention: Matthew Pekarske , Principal of Connectivity and Service Technology

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU5MULW01
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Digital Transmission System
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  
CC MO 15C 2412.0  -  2462.0 0.027  
CC 15C 2422.0  -  2452.0 0.022  

Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.71 dBi for antenna port 1 and 1.49dBi for antenna port 2 for satisfying RF exposure compliance according to as defined in 2.1091.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application ZQGR+qGnNXKqlrtWIP0hyA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

GE Medical Systems Information Technologies Inc.
8200 West Tower avenue
Milwaukee, WI 53223
United States
  Date of Grant: 10/30/2024

Application Dated: 10/30/2024
 
Attention: Matthew Pekarske , Principal of Connectivity and Service Technology

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU5MULW01
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Digital Transmission System
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  
CC MO 15C 2412.0  -  2462.0 0.027  
CC 15C 2422.0  -  2452.0 0.022  

Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.71 dBi for antenna port 1 and 1.49dBi for antenna port 2 for satisfying RF exposure compliance according to as defined in 2.1091.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application W390MEMjOSW1lbIth4xFLw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 10/30/2024

Application Dated: 10/30/2024
GE Medical Systems Information Technologies Inc.
8200 West Tower avenue
Milwaukee, WI 53223
 
Attention: Matthew Pekarske , Principal of Connectivity and Service Technology

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU5MULW01
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  

Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.71 dBi for satisfying RF exposure compliance according to as defined in 2.1091.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application W390MEMjOSW1lbIth4xFLw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

GE Medical Systems Information Technologies Inc.
8200 West Tower avenue
Milwaukee, WI 53223
United States
  Date of Grant: 10/30/2024

Application Dated: 10/30/2024
 
Attention: Matthew Pekarske , Principal of Connectivity and Service Technology

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU5MULW01
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  

Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.71 dBi for satisfying RF exposure compliance according to as defined in 2.1091.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application VOHu8tsiF/DEmy3d8/Nyjw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 06/28/2025

Application Dated: 06/28/2025
GE Medical Systems Information Technologies Inc.
3114 North Grandview Blvd.
Waukesha, WI 53188
 
Attention: Matthew Pekarske , Principal of Connectivity and Service Technology

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU5MULW01
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  

Class II Permissive Change to integrate the approved module into the host (Patient monitor, Model: Carevance H1). The highest reported Body and Simultaneous SAR values are 0.20 W/kg and 1.09 W/kg respectively. Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 4.43 dBi for satisfying RF exposure compliance according to as defined in 2.1091.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application PMCuMBVqAljr6fvzoLa5Fw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/20/2025

Application Dated: 08/20/2025
GE Medical Systems Information Technologies Inc.
3114 North Grandview Blvd.
Waukesha, WI 53188
 
Attention: Matthew Pekarske , Principal of Connectivity and Service Technology

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU5MULW01
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.021  
CC 15E 5190.0  -  5230.0 0.018  
CC ND 15E 5260.0  -  5320.0 0.013  
CC ND 15E 5270.0  -  5310.0 0.015  
CC ND 15E 5500.0  -  5700.0 0.009  
CC ND 15E 5510.0  -  5670.0 0.007  
CC 15E 5745.0  -  5825.0 0.01  
CC 15E 5755.0  -  5795.0 0.009  

Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 5.71 dBi for antenna port 1 and 2.97dBi for antenna port 2 for satisfying RF exposure compliance according to as defined in 2.1091. This device has a 20 MHz, 40 MHz bandwidth mode.

Class II permissive change to integrate the module into the portable host (Manufacturer: GE Healthcare Finland oy, Model: Carescape ONE). The highest reported SAR values for extremity and simultaneous transmission use conditions are 0.68 W/kg and 0.81 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application p48Ed24UsMOgRtNuJ/iGtw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 06/28/2025

Application Dated: 06/28/2025
GE Medical Systems Information Technologies Inc.
3114 North Grandview Blvd.
Waukesha, WI 53188
 
Attention: Matthew Pekarske , Principal of Connectivity and Service Technology

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU5MULW01
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Digital Transmission System
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  
CC MO 15C 2412.0  -  2462.0 0.027  
CC 15C 2422.0  -  2452.0 0.022  

Class II Permissive Change to integrate the approved module into the host (Patient monitor, Model: Carevance H1). The highest reported Body and Simultaneous SAR values are 1.08 W/kg and 1.09 W/kg respectively. Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 4.43 dBi for antenna port 1 and 2.14 dBi for antenna port 2 for satisfying RF exposure compliance according to as defined in 2.1091.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application k7yX7w2b55ysdKyya2obRw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 06/28/2025

Application Dated: 06/28/2025
GE Medical Systems Information Technologies Inc.
3114 North Grandview Blvd.
Waukesha, WI 53188
 
Attention: Matthew Pekarske , Principal of Connectivity and Service Technology

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU5MULW01
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.021  
CC 15E 5190.0  -  5230.0 0.018  
CC ND 15E 5260.0  -  5320.0 0.013  
CC ND 15E 5270.0  -  5310.0 0.015  
CC ND 15E 5500.0  -  5700.0 0.009  
CC ND 15E 5510.0  -  5670.0 0.007  
CC 15E 5745.0  -  5825.0 0.01  
CC 15E 5755.0  -  5795.0 0.009  

Class II Permissive Change to integrate the approved module into the host (Patient monitor, Model: Carevance H1). The highest reported Body and Simultaneous SAR values are 0.89 W/kg and 1.09 W/kg respectively. Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 5.79 dBi for antenna port 1 and 4.73dBi for antenna port 2 for satisfying RF exposure compliance according to as defined in 2.1091. This device has a 20 MHz, 40 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application HGCS73/7HZvig7VI0WKuWg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 06/05/2025

Application Dated: 06/05/2025
GE Medical Systems Information Technologies Inc.
3114 North Grandview Blvd.
Waukesha, WI 53188
 
Attention: Matthew Pekarske , Principal of Connectivity and Service Technology

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU5MULW01
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.021  
CC 15E 5190.0  -  5230.0 0.018  
CC ND 15E 5260.0  -  5320.0 0.013  
CC ND 15E 5270.0  -  5310.0 0.015  
CC ND 15E 5500.0  -  5700.0 0.009  
CC ND 15E 5510.0  -  5670.0 0.007  
CC 15E 5745.0  -  5825.0 0.01  
CC 15E 5755.0  -  5795.0 0.009  

Class II Permissive Change to added antennas.

Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 5.79 dBi for antenna port 1 and 4.73dBi for antenna port 2 for satisfying RF exposure compliance according to as defined in 2.1091. This device has a 20 MHz, 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application DnlbDT4pxF8VtNM7ywEtIw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 06/05/2025

Application Dated: 06/05/2025
GE Medical Systems Information Technologies Inc.
3114 North Grandview Blvd.
Waukesha, WI 53188
 
Attention: Matthew Pekarske , Principal of Connectivity and Service Technology

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU5MULW01
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Digital Transmission System
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  
CC MO 15C 2412.0  -  2462.0 0.027  
CC 15C 2422.0  -  2452.0 0.022  

Class II Permissive Change to added antennas.

Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 4.43 dBi for antenna port 1 and 2.14 dBi for antenna port 2 for satisfying RF exposure compliance according to as defined in 2.1091.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application cRy/pIxKJ/w/U2xI0gcGkw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 10/30/2024

Application Dated: 10/30/2024
GE Medical Systems Information Technologies Inc.
8200 West Tower avenue
Milwaukee, WI 53223
 
Attention: Matthew Pekarske , Principal of Connectivity and Service Technology

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU5MULW01
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.021  
CC 15E 5190.0  -  5230.0 0.018  
CC ND 15E 5260.0  -  5320.0 0.013  
CC ND 15E 5270.0  -  5310.0 0.015  
CC ND 15E 5500.0  -  5700.0 0.009  
CC ND 15E 5510.0  -  5670.0 0.007  
CC 15E 5745.0  -  5825.0 0.01  
CC 15E 5755.0  -  5795.0 0.009  

Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 5.71 dBi for antenna port 1 and 2.97dBi for antenna port 2 for satisfying RF exposure compliance according to as defined in 2.1091. This device has a 20 MHz, 40 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application cRy/pIxKJ/w/U2xI0gcGkw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

GE Medical Systems Information Technologies Inc.
8200 West Tower avenue
Milwaukee, WI 53223
United States
  Date of Grant: 10/30/2024

Application Dated: 10/30/2024
 
Attention: Matthew Pekarske , Principal of Connectivity and Service Technology

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU5MULW01
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.021  
CC 15E 5190.0  -  5230.0 0.018  
CC ND 15E 5260.0  -  5320.0 0.013  
CC ND 15E 5270.0  -  5310.0 0.015  
CC ND 15E 5500.0  -  5700.0 0.009  
CC ND 15E 5510.0  -  5670.0 0.007  
CC 15E 5745.0  -  5825.0 0.01  
CC 15E 5755.0  -  5795.0 0.009  

Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 5.71 dBi for antenna port 1 and 2.97dBi for antenna port 2 for satisfying RF exposure compliance according to as defined in 2.1091. This device has a 20 MHz, 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 6D6eEPL3MgLTyvS1Y3VxOw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/20/2025

Application Dated: 08/20/2025
GE Medical Systems Information Technologies Inc.
3114 North Grandview Blvd.
Waukesha, WI 53188
 
Attention: Matthew Pekarske , Principal of Connectivity and Service Technology

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU5MULW01
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  

Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.71 dBi for satisfying RF exposure compliance according to as defined in 2.1091.

Class II permissive change to integrate the module into the portable host (Manufacturer: GE Healthcare Finland oy, Model: Carescape ONE). The highest reported SAR values for simultaneous transmission use conditions are 0.81 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 3FnzAL4AG27ttWr5nhPVRQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/20/2025

Application Dated: 08/20/2025
GE Medical Systems Information Technologies Inc.
3114 North Grandview Blvd.
Waukesha, WI 53188
 
Attention: Matthew Pekarske , Principal of Connectivity and Service Technology

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU5MULW01
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Digital Transmission System
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  
CC MO 15C 2412.0  -  2462.0 0.027  
CC 15C 2422.0  -  2452.0 0.022  

Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.71 dBi for antenna port 1 and 1.49dBi for antenna port 2 for satisfying RF exposure compliance according to as defined in 2.1091.

Class II permissive change to integrate the module into the portable host (Manufacturer: GE Healthcare Finland oy, Model: Carescape ONE). The highest reported SAR values for extremity and simultaneous transmission use conditions are 0.48 W/kg and 0.81 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 1VzpoYZfKsAUp/hun2hFhg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 06/05/2025

Application Dated: 06/05/2025
GE Medical Systems Information Technologies Inc.
3114 North Grandview Blvd.
Waukesha, WI 53188
 
Attention: Matthew Pekarske , Principal of Connectivity and Service Technology

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OU5MULW01
Name of Grantee:  GE Medical Systems Information Technologies Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  

Class II Permissive Change to added antennas.

Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 4.43 dBi for satisfying RF exposure compliance according to as defined in 2.1091.


CC: This device is certified pursuant to two different Part 15 rules sections.