CBRSNS CyberSense RF Exposure Info RF EXPOSURE Paul C. Buff, Inc.
Paul C. Buff, Inc. CyberSense
FCC ID >
FCC ID Filing: OUECBRSNS
Purchase on Amazon: CyberSense
|Download:||Document Description||18_1.0 RFExp||Document Type||RF Exposure Info||Document Title||Microsoft Word - RF EXPOSURE|
Dongguan Nore Testing Center Co., Ltd. Report No.: NTC1707326F-1 FCC ID: OUECBRSNS RF EXPOSURE EVALUATION EUT Specification EUT Frequency band (Operating) Device category Antenna diversity Max. output power Antenna gain Evaluation applied CyberSense WLAN: 2.415GHz ~ 2.463GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5.825GHz Others(2.427GHz ~ 2.457GHz) Portable (<20cm separation) Mobile (>20cm separation) Others ___ Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity 90.31 dBuV/m (-5.34dBm)(0.29mW) 0dBi MPE Evaluation SAR Evaluation Standard Requirement Portable Device According to §15.247(i) and §1.1307b(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. See KDB 447498 D01 General RF Exposure Guidance v05, section 4.3.1. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where ·f(GHz) is the RF channel transmit frequency in GHz ·Power and distance are rounded to the nearest mW and mm before calculation17 ·The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Dongguan Nore Testing Center Co., Ltd. Report No.: NTC1707326F-1 FCC ID: OUECBRSNS Measurement Result Channel Frequency (MHz) 2427 2441 2457 Max Output power (dBuV/m) 89.92 89.47 90.31 Max Output power (dBm) -5.34 -5.79 -4.95 Max Output power (mW) Calculation Value (Note 1) Threshold Value 0.29 0.26 0.32 0.0904 0.0812 0.1003 3.0 3.0 3.0 EIRP=E-104.8+20logD=90.31-104.8+20log3=-4.95dBm Note 1: Calculation Value =[(max. power of channel, mW)/(min. test separation distance, mm)] ·[√f(GHz)]. Fox example: 0.32/5*√2.457=0.1003 ≤ 3.0 According to KDB447498 D01 V06, no simultaneous SAR measurement is required.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Warning : Info object (42 0 obj) not found at 330419