FCC ID OUR-9XTEND
9XTEND OEM RF Module
by MaxStream Inc.
Grantee Code: OUR Product Code: 9XTEND
Latest application date: 2010-03-12
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.9-927.1 MHz | Class II permissive change or modification of presently authorized equipment | 2010-03-12 |
| 902.9-927.1 MHz | Original Equipment | 2004-11-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2010-03-12 | PDF 2 MB |
| USERS MANUAL | Users Manual | 2004-11-15 | PDF 2.7 MB |
| INTERNAL PHOTOS | Internal Photos | 2004-11-15 | PDF 112.3 KB |
| Antenna Photos | External Photos | 2010-03-12 | PDF 655.3 KB |
| EXTERNAL PHOTOS | External Photos | 2004-11-15 | PDF 523 KB |
| ID LABEL ANDL LOCATION | ID Label/Location Info | 2004-11-15 | PDF 360.2 KB |
| Setup Photos | Test Setup Photos | 2010-03-12 | PDF 338.3 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2004-11-15 | PDF 2 MB |
| C2PC Test Report | Test Report | 2010-03-12 | PDF 430.7 KB |
| TEST REPORT | Test Report | 2004-11-15 | PDF 1 MB |
| Agent Authority Letter | Cover Letter(s) | 2010-03-12 | PDF 225.7 KB |
| Applicant Cover Letter | Cover Letter(s) | 2010-03-12 | PDF 50.3 KB |
| CONFIDENTIALITY LETTER | Cover Letter(s) | 2004-11-15 | PDF 993 KB |
| modular approval request letter | Cover Letter(s) | 2004-11-15 | PDF 771.2 KB |
| RF Exposure Info | RF Exposure Info | 2010-03-12 | PDF 73.7 KB |
| BLOCK DIAGRAM Metadata only | Block Diagram | PDF 34.3 KB | |
| SCHEMATICS Metadata only | Schematics | PDF 256.2 KB | |
| OPERATIONAL DESCRIPTION Metadata only | Operational Description | PDF 8.2 KB | |
| PARTS LIST Metadata only | Parts List/Tune Up Info | PDF 60.3 KB |
Application Information
| Application ID | yb34kkkyVWfg5KrQEBdftg== |
|---|---|
| Final Action Date | 2010-03-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006110282 |
| Model | -9XTEND |
| Frequency Range | 902.9-927.1 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 9XTEND OEM RF Module |
| Responsible Party | Paul Dahl, Hardware Manager, paul.dahl@digi.com  , 801-765-9885 |
| Agent | Dan Dan Dan, UltraTech Engineering Labs Inc., dan@ultratech-labs.com  , 905-829-1570 |
| Technical Contact | Dan Huynh, UltraTech Engineering Labs Inc., dan@ultratech-labs.com , 905-829-1570 |
| Test Firm | Dharmajit Solanki, UltraTech Engineering Labs Inc., dharmajit@ultratech-labs.com , 905-829-1570 |
| TCB Email | vic@ultratech-labs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval: Power output is conducted at the antenna terminal and can be adjusted from 1 milli-Watt to 1 Watt at the OEM level. This is an OEM Module approved for Limited Modular use operating as a mobile transmitting device with respect to 2.1091 and is limited to OEM installation for Mobile and Fixed applications only. Use of external antennas requires professional installation. When Professional Installation does apply, end users must be prohibited from access to any programming parameters. MPE compliance was demonstrated for the antenna(s) as shown in the filing. The OEM integrator must provide information in the User Manual stating Professional Installation adjustment is required for setting module power and antenna gain to meet EIRP compliance for high gain antenna(s). The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Grantee must coordinate with OEM integrators to ensure the end-users and installers of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure the end-user has no Manual Instructions to remove, adjust, or install the device. Class II Permissive Change for new data rate operation of 104 kbps and additional 15.1 dBi Yagi Antenna with Cable Assembly of 9.1 dB loss. This antenna used for this device must be installed to provide a separation distance of at least 23cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| yb34kkkyVWfg5KrQEBdftg== | 2010-03-12 | Class II permissive change or modification of presently authorized equipment |
| bjuXozGjkUwYS1WfpMNhRQ== | 2004-11-15 | Original Equipment |
Grants
TCB Grant - Application yb34kkkyVWfg5KrQEBdftg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 03/12/2010 Application Dated: 03/12/2010 |
| MaxStream Inc. |
| 355 South 520 West |
| Suite 180 |
| Lindon, UT 84042 |
| Attention: Paul Dahl , Hardware Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OUR-9XTEND |
| Name of Grantee: | MaxStream Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 9XTEND OEM RF Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.9 - 927.1 | 1.0 | |||
| 15C | 902.9 - 927.1 | 0.001 |
| Limited Modular Approval: Power output is conducted at the antenna terminal and can be adjusted from 1 milli-Watt to 1 Watt at the OEM level. This is an OEM Module approved for Limited Modular use operating as a mobile transmitting device with respect to 2.1091 and is limited to OEM installation for Mobile and Fixed applications only. Use of external antennas requires professional installation. When Professional Installation does apply, end users must be prohibited from access to any programming parameters. MPE compliance was demonstrated for the antenna(s) as shown in the filing. The OEM integrator must provide information in the User Manual stating Professional Installation adjustment is required for setting module power and antenna gain to meet EIRP compliance for high gain antenna(s). The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Grantee must coordinate with OEM integrators to ensure the end-users and installers of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure the end-user has no Manual Instructions to remove, adjust, or install the device. Class II Permissive Change for new data rate operation of 104 kbps and additional 15.1 dBi Yagi Antenna with Cable Assembly of 9.1 dB loss. This antenna used for this device must be installed to provide a separation distance of at least 23cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. |
EAS Grant - Application yb34kkkyVWfg5KrQEBdftg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MaxStream Inc. 355 South 520 West Suite 180 Lindon, UT 84042 United States |
Date of Grant: 03/12/2010 Application Dated: 03/12/2010 |
| Attention: Paul Dahl , Hardware Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OUR-9XTEND |
| Name of Grantee: | MaxStream Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 9XTEND OEM RF Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.9 - 927.1 | 1.0 | |||
| 15C | 902.9 - 927.1 | 0.001 |
| Limited Modular Approval: Power output is conducted at the antenna terminal and can be adjusted from 1 milli-Watt to 1 Watt at the OEM level. This is an OEM Module approved for Limited Modular use operating as a mobile transmitting device with respect to 2.1091 and is limited to OEM installation for Mobile and Fixed applications only. Use of external antennas requires professional installation. When Professional Installation does apply, end users must be prohibited from access to any programming parameters. MPE compliance was demonstrated for the antenna(s) as shown in the filing. The OEM integrator must provide information in the User Manual stating Professional Installation adjustment is required for setting module power and antenna gain to meet EIRP compliance for high gain antenna(s). The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Grantee must coordinate with OEM integrators to ensure the end-users and installers of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure the end-user has no Manual Instructions to remove, adjust, or install the device. Class II Permissive Change for new data rate operation of 104 kbps and additional 15.1 dBi Yagi Antenna with Cable Assembly of 9.1 dB loss. This antenna used for this device must be installed to provide a separation distance of at least 23cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/15/2004 Application Dated: 11/15/2004 |
| MaxStream Inc. |
| 355 South 520 West |
| Suite 180 |
| Lindon, UT 84042 |
| Attention: Paul Dahl , Hardware Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OUR-9XTEND |
| Name of Grantee: | MaxStream Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 9XTEND OEM RF Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.9 - 927.1 | 1.0 | |||
| 15C | 902.9 - 927.1 | 0.001 |
| Limited Modular Approval: Power output is conducted at the antenna terminal and can be adjusted from 1 milli-Watt to 1 Watt at the OEM level. This is an OEM Module approved for Limited Modular use operating as a mobile transmitting device with respect to 2.1091 and is limited to OEM installation for Mobile and Fixed applications only. Use of external antennas requires professional installation. When Professional Installation does apply, end users must be prohibited from access to any programming parameters. MPE compliance was demonstrated for the antenna(s) as shown in the filing. The OEM integrator must provide information in the User Manual stating Professional Installation adjustment is required for setting module power and antenna gain to meet EIRP compliance for high gain antenna(s). The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Grantee must coordinate with OEM integrators to ensure the end-users and installers of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure the end-user has no Manual Instructions to remove, adjust, or install the device. |
EAS Grant - Application bjuXozGjkUwYS1WfpMNhRQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MaxStream Inc. 355 South 520 West Suite 180 Lindon, UT 84042 United States |
Date of Grant: 11/15/2004 Application Dated: 11/15/2004 |
| Attention: Paul Dahl , Hardware Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OUR-9XTEND |
| Name of Grantee: | MaxStream Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 9XTEND OEM RF Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.9 - 927.1 | 1.0 | |||
| 15C | 902.9 - 927.1 | 0.001 |
| Limited Modular Approval: Power output is conducted at the antenna terminal and can be adjusted from 1 milli-Watt to 1 Watt at the OEM level. This is an OEM Module approved for Limited Modular use operating as a mobile transmitting device with respect to 2.1091 and is limited to OEM installation for Mobile and Fixed applications only. Use of external antennas requires professional installation. When Professional Installation does apply, end users must be prohibited from access to any programming parameters. MPE compliance was demonstrated for the antenna(s) as shown in the filing. The OEM integrator must provide information in the User Manual stating Professional Installation adjustment is required for setting module power and antenna gain to meet EIRP compliance for high gain antenna(s). The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Grantee must coordinate with OEM integrators to ensure the end-users and installers of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure the end-user has no Manual Instructions to remove, adjust, or install the device. |
| Mail To: |