FCC ID OUR-XBEE
XBee OEM RF Module
by MaxStream Inc.
Grantee Code: OUR Product Code: XBEE
Latest application date: 2011-12-09
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2405-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2011-12-09 |
| 2405-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2011-06-14 |
| 2405-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2011-06-06 |
| 2405-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2007-06-08 |
| 2405-2480 MHz | Original Equipment | 2005-09-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2011-12-09 | PDF 889.7 KB |
| Revised Used Manual | Users Manual | 2011-06-06 | PDF 810.4 KB |
| users manual | Users Manual | 2007-06-08 | PDF 1.1 MB |
| USERS MANUAL | Users Manual | 2005-09-26 | PDF 1.6 MB |
| INTERNAL PHOTOS | Internal Photos | 2005-09-26 | PDF 146.7 KB |
| External Photos | External Photos | 2011-12-09 | PDF 242.4 KB |
| Excternal Photos | External Photos | 2011-06-06 | PDF 153.6 KB |
| EXTERNAL PHOTOS | External Photos | 2005-09-26 | PDF 545.3 KB |
| LABEL AND LOCATION | ID Label/Location Info | 2005-09-26 | PDF 354.1 KB |
| ANTENNA LIST | Operational Description | 2005-09-26 | PDF 27.4 KB |
| Test Setup Photos | Test Setup Photos | 2011-12-09 | PDF 370.1 KB |
| Test Setup Photos | Test Setup Photos | 2011-06-06 | PDF 266.5 KB |
| test setup photos | Test Setup Photos | 2007-06-08 | PDF 920 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2005-09-26 | PDF 1.1 MB |
| Test Report | Test Report | 2011-12-09 | PDF 343.6 KB |
| C2PC Report | Test Report | 2011-06-06 | PDF 315.8 KB |
| test report | Test Report | 2007-06-08 | PDF 1 MB |
| TEST REPORT | Test Report | 2005-09-26 | PDF 1.1 MB |
| Authority Letter | Cover Letter(s) | 2011-12-09 | PDF 224 KB |
| Cover Letter | Cover Letter(s) | 2011-12-09 | PDF 81.8 KB |
| Agent Authority Letter | Cover Letter(s) | 2011-06-14 | PDF 224 KB |
| Cover Letter | Cover Letter(s) | 2011-06-14 | PDF 82.2 KB |
| KDB Guidance | Cover Letter(s) | 2011-06-14 | PDF 21.2 KB |
| Cover Letter | Cover Letter(s) | 2011-06-06 | PDF 81.9 KB |
| class II permissive change | Cover Letter(s) | 2007-06-08 | PDF 149.1 KB |
| confidentiality letter | Cover Letter(s) | 2007-06-08 | PDF 168.6 KB |
| cover letter | Cover Letter(s) | 2007-06-08 | PDF 106.7 KB |
| modular approval letter | Cover Letter(s) | 2007-06-08 | PDF 679.4 KB |
| CONFIDENTIALITY LIST | Cover Letter(s) | 2005-09-26 | PDF 44.6 KB |
| COVER LETTER | Cover Letter(s) | 2005-09-26 | PDF 78.4 KB |
| RF Exposure Info | RF Exposure Info | 2011-06-14 | PDF 99.5 KB |
| rf exposure info | RF Exposure Info | 2007-06-08 | PDF 183 KB |
| BLOCK DIAGRAM Metadata only | Block Diagram | PDF 26.6 KB | |
| SCHEMATICS Metadata only | Schematics | PDF 133.1 KB | |
| OPERATIONAL DESCRIPTION Metadata only | Operational Description | PDF 7.8 KB | |
| PARTS LIST Metadata only | Parts List/Tune Up Info | PDF 17.5 KB |
Application Information
| Application ID | m6UdXH79um1PZ1G8Mlifpw== |
|---|---|
| Final Action Date | 2011-12-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006110282 |
| Model | -XBEE |
| Frequency Range | 2405-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | XBee OEM RF Module |
| Responsible Party | Paul Dahl, Hardware Manager, paul.dahl@digi.com  , 801-765-9885 |
| Agent | Dharmajit Dharmajit Dharmajit, UltraTech Engineering Labs Inc., dharmajit@ultratech-labs.com  , 905-829-1570 |
| Test Firm | Dharmajit Solanki, UltraTech Engineering Labs Inc., dharmajit@ultratech-labs.com , 905-829-1570 |
| TCB Email | vic@ultratech-labs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with a typical antenna(s) gain as shown in this filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the eirp of the configuration used for MPE compliance. Professional installation is required for those antenna(s) installations using standard connectors. Products operating with this module are required to provide a minimum separation distance of 20 cm. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF Exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations This class II permissive change filing adds integral PCB trace type of antenna. This class II permissive change filing is to allow this module for use in stand-alone portable exposure condition with no restriction on host platform as its peak conducted output power is 1 mWatt, which is much below the threshold requirement of 24 mW for this frequency band as specified in FCC KBD # 447498, sec 2(a)(1). Also refer to the FCC response to the KDB Inquiry# 292292 submitted with this filing for more details. This class II permissive change adds an integrated PCB Omnidirectional antenna. (manufacturer: Digi, model: 29000430, gain: -0.5 dBi) This class II permissive change adds an external Laird make Phantom antenna, Part No.: A24-H3UF, Gain: 3 dBi |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| m6UdXH79um1PZ1G8Mlifpw== | 2011-12-09 | Class II permissive change or modification of presently authorized equipment |
| cJnOxhqOwJSNpCPhkeMWvg== | 2011-06-14 | Class II permissive change or modification of presently authorized equipment |
| zNiXoprIW2bgG9ei/eTYlA== | 2011-06-06 | Class II permissive change or modification of presently authorized equipment |
| CrE+/QPOZv5KiVaLd8FAKg== | 2007-06-08 | Class II permissive change or modification of presently authorized equipment |
| K7Ul59NZ7yHBet6KX52ZBQ== | 2005-09-26 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application zNiXoprIW2bgG9ei/eTYlA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 06/06/2011 Application Dated: 06/06/2011 |
| MaxStream Inc. |
| 355 South 520 West |
| Suite 180 |
| Lindon, UT 84042 |
| Attention: Paul Dahl , Hardware Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OUR-XBEE |
| Name of Grantee: | MaxStream Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee OEM RF Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2405.0 - 2480.0 | 0.001 |
| Limited Modular Approval. Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with a typical antenna(s) gain as shown in this filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for MPE compliance. Professional installation is required for those antenna(s) installations using standard connectors. Products operating with this module are required to provide a minimum separation distance of 20 cm. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations This Class II permissive change filing adds integral PCB trace type of antenna. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application zNiXoprIW2bgG9ei/eTYlA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MaxStream Inc. 355 South 520 West Suite 180 Lindon, UT 84042 United States |
Date of Grant: 06/06/2011 Application Dated: 06/06/2011 |
| Attention: Paul Dahl , Hardware Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OUR-XBEE |
| Name of Grantee: | MaxStream Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee OEM RF Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2405.0 - 2480.0 | 0.001 |
| Limited Modular Approval. Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with a typical antenna(s) gain as shown in this filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for MPE compliance. Professional installation is required for those antenna(s) installations using standard connectors. Products operating with this module are required to provide a minimum separation distance of 20 cm. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations This Class II permissive change filing adds integral PCB trace type of antenna. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 12/09/2011 Application Dated: 12/09/2011 |
| MaxStream Inc. |
| 355 South 520 West |
| Suite 180 |
| Lindon, UT 84042 |
| Attention: Paul Dahl , Hardware Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OUR-XBEE |
| Name of Grantee: | MaxStream Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee OEM RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2405.0 - 2480.0 | 0.001 |
| Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with a typical antenna(s) gain as shown in this filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the eirp of the configuration used for MPE compliance. Professional installation is required for those antenna(s) installations using standard connectors. Products operating with this module are required to provide a minimum separation distance of 20 cm. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF Exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations This class II permissive change filing adds integral PCB trace type of antenna. This class II permissive change filing is to allow this module for use in stand-alone portable exposure condition with no restriction on host platform as its peak conducted output power is 1 mWatt, which is much below the threshold requirement of 24 mW for this frequency band as specified in FCC KBD # 447498, sec 2(a)(1). Also refer to the FCC response to the KDB Inquiry# 292292 submitted with this filing for more details. This class II permissive change adds an integrated PCB Omnidirectional antenna. (manufacturer: Digi, model: 29000430, gain: -0.5 dBi) This class II permissive change adds an external Laird make Phantom antenna, Part No.: A24-H3UF, Gain: 3 dBi |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application m6UdXH79um1PZ1G8Mlifpw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MaxStream Inc. 355 South 520 West Suite 180 Lindon, UT 84042 United States |
Date of Grant: 12/09/2011 Application Dated: 12/09/2011 |
| Attention: Paul Dahl , Hardware Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OUR-XBEE |
| Name of Grantee: | MaxStream Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee OEM RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2405.0 - 2480.0 | 0.001 |
| Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with a typical antenna(s) gain as shown in this filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the eirp of the configuration used for MPE compliance. Professional installation is required for those antenna(s) installations using standard connectors. Products operating with this module are required to provide a minimum separation distance of 20 cm. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF Exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations This class II permissive change filing adds integral PCB trace type of antenna. This class II permissive change filing is to allow this module for use in stand-alone portable exposure condition with no restriction on host platform as its peak conducted output power is 1 mWatt, which is much below the threshold requirement of 24 mW for this frequency band as specified in FCC KBD # 447498, sec 2(a)(1). Also refer to the FCC response to the KDB Inquiry# 292292 submitted with this filing for more details. This class II permissive change adds an integrated PCB Omnidirectional antenna. (manufacturer: Digi, model: 29000430, gain: -0.5 dBi) This class II permissive change adds an external Laird make Phantom antenna, Part No.: A24-H3UF, Gain: 3 dBi |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/26/2005 Application Dated: 09/26/2005 |
| MaxStream Inc. |
| 355 South 520 West |
| Suite 180 |
| Lindon, UT 84042 |
| Attention: Paul Dahl , Hardware Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OUR-XBEE |
| Name of Grantee: | MaxStream Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | XBEE OEM RF MODULE |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.001 |
| Limited Modular Approval. Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with a typical antenna(s) gain as shown in this filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for MPE compliance. Professional installation is required for those antenna(s) installations using standard connectors. Products operating with this module are required to provide a minimum separation distance of 20cm. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Plus Grant Note 20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application K7Ul59NZ7yHBet6KX52ZBQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MaxStream Inc. 355 South 520 West Suite 180 Lindon, UT 84042 United States |
Date of Grant: 09/26/2005 Application Dated: 09/26/2005 |
| Attention: Paul Dahl , Hardware Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OUR-XBEE |
| Name of Grantee: | MaxStream Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | XBEE OEM RF MODULE |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.001 |
| Limited Modular Approval. Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with a typical antenna(s) gain as shown in this filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for MPE compliance. Professional installation is required for those antenna(s) installations using standard connectors. Products operating with this module are required to provide a minimum separation distance of 20cm. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Plus Grant Note 20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 06/08/2007 Application Dated: 06/07/2007 |
| MaxStream Inc. |
| 355 South 520 West |
| Suite 180 |
| Lindon, UT 84042 |
| Attention: Paul Dahl , Hardware Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OUR-XBEE |
| Name of Grantee: | MaxStream Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee OEM RF Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2405.0 - 2480.0 | 0.001 |
| Limited Modular Approval. Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with a typical antenna(s) gain as shown in this filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for MPE compliance. Professional installation is required for those antenna(s) installations using standard connectors. Products operating with this module are required to provide a minimum separation distance of 20cm. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application CrE+/QPOZv5KiVaLd8FAKg==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| MaxStream Inc. 355 South 520 West Suite 180 Lindon, UT 84042 United States | Date of Grant: 06/08/2007 Application Dated: 06/07/2007 |
| Attention: Paul Dahl , Hardware Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OUR-XBEE |
| Name of Grantee: | MaxStream Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee OEM RF Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2405.0 - 2480.0 | 0.001 |
| Limited Modular Approval. Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with a typical antenna(s) gain as shown in this filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for MPE compliance. Professional installation is required for those antenna(s) installations using standard connectors. Products operating with this module are required to provide a minimum separation distance of 20cm. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
|
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |
| EA479730 |
TCB Grant - Application cJnOxhqOwJSNpCPhkeMWvg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 06/14/2011 Application Dated: 06/13/2011 |
| MaxStream Inc. |
| 355 South 520 West |
| Suite 180 |
| Lindon, UT 84042 |
| Attention: Paul Dahl , Hardware Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OUR-XBEE |
| Name of Grantee: | MaxStream Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee OEM RF Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2405.0 - 2480.0 | 0.001 |
| Limited Modular Approval. Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with a typical antenna(s) gain as shown in this filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for MPE compliance. Professional installation is required for those antenna(s) installations using standard connectors. Products operating with this module are required to provide a minimum separation distance of 20 cm. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations This Class II Permissive Change filing adds integral PCB trace type of antenna. This Class II Permissive Change filing is to allow this module for use in stand-alone portable exposure condition with no restriction on host platform as its peak conducted output power is 1 mWatt, which is much below the threshold requirement of 24 mW for this frequency band as specified in FCC KDB # 447498, Sec 2(a)(1). Also refer to the FCC response to the KDB inquiry# 292292 submitted with this filing for more details. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application cJnOxhqOwJSNpCPhkeMWvg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MaxStream Inc. 355 South 520 West Suite 180 Lindon, UT 84042 United States |
Date of Grant: 06/14/2011 Application Dated: 06/13/2011 |
| Attention: Paul Dahl , Hardware Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OUR-XBEE |
| Name of Grantee: | MaxStream Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee OEM RF Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2405.0 - 2480.0 | 0.001 |
| Limited Modular Approval. Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with a typical antenna(s) gain as shown in this filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for MPE compliance. Professional installation is required for those antenna(s) installations using standard connectors. Products operating with this module are required to provide a minimum separation distance of 20 cm. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations This Class II Permissive Change filing adds integral PCB trace type of antenna. This Class II Permissive Change filing is to allow this module for use in stand-alone portable exposure condition with no restriction on host platform as its peak conducted output power is 1 mWatt, which is much below the threshold requirement of 24 mW for this frequency band as specified in FCC KDB # 447498, Sec 2(a)(1). Also refer to the FCC response to the KDB inquiry# 292292 submitted with this filing for more details. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |