FCC ID OUY-READYAMI

READy Collector Top

by Kamstrup A/S

Grantee Code: OUY   Product Code: READYAMI
Latest application date: 2018-10-23

FCC ID Device Details

FCC IDOUY-READYAMI
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeOUY
Product CodeREADYAMI
Applicant BusinessKamstrup A/S 🇩🇰
Related Domains kamstrup.com
Equipment ClassREADy Collector Top
Test FirmEurofins Product Service GmbH

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
451.025-469.975 MHzClass II permissive change or modification of presently authorized equipment2018-10-23
451.025-469.975 MHzOriginal Equipment2018-04-17

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2018-10-14PDF 498.8 KB
Int phoInternal Photos2018-11-26PDF 147.8 KB
Internal photosInternal Photos2018-10-14PDF 326.4 KB
Ext phoExternal Photos2018-11-26PDF 114.1 KB
External photosExternal Photos2018-10-14PDF 134.6 KB
Label locationID Label/Location Info2018-04-17PDF 25.2 KB
Label sampleID Label/Location Info2018-04-17PDF 69.4 KB
Test setup phoTest Setup Photos2018-11-26PDF 69 KB
Test setup photosTest Setup Photos2018-10-14PDF 144.7 KB
Test rpt EMCTest Report2018-10-23PDF 1 MB
Test rpt PMRTest Report2018-10-23PDF 580.3 KB
Test report EMCTest Report2018-04-17PDF 1.5 MB
Test report radioTest Report2018-04-17PDF 2.9 MB
Ant specAttestation Statements2018-04-17PDF 35.4 KB
Aut letCover Letter(s)2018-10-23PDF 22.9 KB
Change letterCover Letter(s)2018-10-23PDF 29.7 KB
Con req ltCover Letter(s)2018-10-23PDF 32.7 KB
Con req stCover Letter(s)2018-10-23PDF 39.7 KB
Confidentiality requestCover Letter(s)2018-04-17PDF 40.8 KB
PoA letterCover Letter(s)2018-04-17PDF 35 KB
Short term confidentiality requestCover Letter(s)2018-04-17PDF 38.6 KB
RF exposureRF Exposure Info2018-04-17PDF 837.2 KB
Blk dia Metadata onlyBlock DiagramPDF 184.4 KB
Block diagram CPU Metadata onlyBlock DiagramPDF 33.3 KB
Block diagram RF Metadata onlyBlock DiagramPDF 25.6 KB
Schem Metadata onlySchematicsPDF 608.6 KB
Schematics D4 Metadata onlySchematicsPDF 423 KB
Schematics F1 Metadata onlySchematicsPDF 611.3 KB
Antenna specs Metadata onlyOperational DescriptionPDF 26.1 KB
Detailed changes Metadata onlyOperational DescriptionPDF 715.4 KB
Op des Metadata onlyOperational DescriptionPDF 364 KB
Operational description Metadata onlyOperational DescriptionPDF 363.2 KB
Parts list Metadata onlyParts List/Tune Up InfoPDF 462.3 KB
Parts list Metadata onlyParts List/Tune Up InfoPDF 36.8 KB

Application Information

Application IDlRHdLapJmrQ5mJQHX2QMrw==
Final Action Date2018-10-23
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0021926498
ModelREADYAMI
Frequency Range451.025-469.975 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionREADy Collector Top
Responsible PartyJacob Hansen, Product Manager, jah@kamstrup.com , +4589931000
Technical ContactJacob Stilling, Kamstrup A/S, jcs@kamstrup.com , +45 89 93 11 42
Test FirmJorg Kusig, Eurofins Product Service GmbH, joergkusig@eurofins.de , 49-33631-888-700
TCB EmailJoergKusig@eurofins.de
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityYes
Short-Term Confidentiality Date11/26/2018
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is ERP. The antennas used for these transmitters must be installed to provide a separation distance of at least 68.14 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter other than those contained within this application. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II permissive change: BOM changes were made on the radio board and on the CPU board. PCB changes were made on the CPU board.

Applications

Application IDDatePurpose
lRHdLapJmrQ5mJQHX2QMrw==2018-10-23Class II permissive change or modification of presently authorized equipment
XyDLQR0SKhbn/zXj7+UUQA==2018-04-17Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
451.025-469.975 MHz11.14000000.2600000000ppm9K71F1D90EF

Grants

TCB Grant - Application XyDLQR0SKhbn/zXj7+UUQA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 04/17/2018

Application Dated: 04/17/2018
Kamstrup A/S
Industrivej 28
Skanderborg, DK-8660
Denmark
 
Attention: Jacob Hansen , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OUY-READYAMI
Name of Grantee:  Kamstrup A/S
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: READy Collector Top
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF 90 451.025  -  469.975 11.14 0.26  PM 9K71F1D

Output power listed is ERP. The antennas used for these transmitters must be installed to provide a separation distance of at least 68.14 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter other than those contained within this application. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application XyDLQR0SKhbn/zXj7+UUQA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Kamstrup A/S
Industrivej 28
Skanderborg, DK-8660
Denmark
  Date of Grant: 04/17/2018

Application Dated: 04/17/2018
 
Attention: Jacob Hansen , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OUY-READYAMI
Name of Grantee:  Kamstrup A/S
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: READy Collector Top
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF 90 451.025  -  469.975 11.14 0.26  PM 9K71F1D

Output power listed is ERP. The antennas used for these transmitters must be installed to provide a separation distance of at least 68.14 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter other than those contained within this application. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application lRHdLapJmrQ5mJQHX2QMrw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 10/23/2018

Application Dated: 10/23/2018
Kamstrup A/S
Industrivej 28
Skanderborg, DK-8660
Denmark
 
Attention: Jacob Hansen , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OUY-READYAMI
Name of Grantee:  Kamstrup A/S
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: READy Collector Top
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF 90 451.025  -  469.975 11.14 0.26  PM 9K71F1D

Output power listed is ERP. The antennas used for these transmitters must be installed to provide a separation distance of at least 68.14 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter other than those contained within this application. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II permissive change: BOM changes were made on the radio board and on the CPU board. PCB changes were made on the CPU board.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application lRHdLapJmrQ5mJQHX2QMrw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Kamstrup A/S
Industrivej 28
Skanderborg, DK-8660
Denmark
  Date of Grant: 10/23/2018

Application Dated: 10/23/2018
 
Attention: Jacob Hansen , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OUY-READYAMI
Name of Grantee:  Kamstrup A/S
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: READy Collector Top
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF 90 451.025  -  469.975 11.14 0.26  PM 9K71F1D

Output power listed is ERP. The antennas used for these transmitters must be installed to provide a separation distance of at least 68.14 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter other than those contained within this application. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II permissive change: BOM changes were made on the radio board and on the CPU board. PCB changes were made on the CPU board.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

Mail To: