FCC ID OVNMUF

RFID radio module

by STid

Grantee Code: OVN   Product Code: MUF
Latest application date: 2026-09-01

FCC ID Device Details

FCC IDOVNMUF
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeOVN
Product CodeMUF
Applicant BusinessSTid 🇫🇷
Related Domains stid.com
Equipment ClassRFID radio module
Test FirmEMITECH Montpellier

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.75-927.25 MHzClass II permissive change or modification of presently authorized equipment2026-09-01
902.75-927.25 MHzOriginal Equipment2026-07-23
902.75-927.25 MHzOriginal Equipment2026-05-07

Exhibits

DocumentTypeAvailableFile
User Manual SLAUsers Manual2026-09-01PDF 1.2 MB
User Manual SMAUsers Manual2026-09-01PDF 940.6 KB
User Manual SME SLEUsers Manual2026-09-01PDF 1.1 MB
User Manual SMI SLIUsers Manual2026-09-01PDF 1.2 MB
User Manual SNAUsers Manual2026-09-01PDF 1.1 MB
User Manual MUFUsers Manual2026-07-23PDF 608.5 KB
Internal PhotosInternal Photos2026-09-01PDF 4.7 MB
Internal PhotosInternal Photos2026-07-23PDF 1.4 MB
Internal PhotosInternal Photos2026-05-07PDF 1 MB
External PhotosExternal Photos2026-09-01PDF 2.5 MB
External PhotosExternal Photos2026-07-23PDF 872.2 KB
External PhotosExternal Photos2026-05-07PDF 881 KB
Label SampleID Label/Location Info2026-09-01PDF 1.4 MB
Label and Location InformationID Label/Location Info2026-09-01PDF 1 MB
Label SampleID Label/Location Info2026-07-23PDF 684.3 KB
Label and Location InformationID Label/Location Info2026-07-23PDF 2.6 MB
Label LocationID Label/Location Info2026-05-07PDF 519.5 KB
Label SamplesID Label/Location Info2026-05-07PDF 528.7 KB
TSUP 1Test Setup Photos2026-09-01PDF 864.8 KB
TSUP 2Test Setup Photos2026-09-01PDF 1 MB
Antenna ReportTest Setup Photos2026-07-23PDF 942.1 KB
TSUPTest Setup Photos2026-05-07PDF 864.8 KB
Antenna InformationTest Report2026-09-01PDF 126.3 KB
Test ReportTest Report2026-09-01PDF 3.2 MB
Test Report BLETest Report2026-09-01PDF 2.1 MB
Test Report RFIDTest Report2026-09-01PDF 3.1 MB
Test ReportTest Report2026-07-23PDF 3.2 MB
Test Report BLETest Report2026-05-07PDF 1.9 MB
Test Report RFIDTest Report2026-05-07PDF 2.8 MB
Attestation Statement part 2.911(d)(7)Attestation Statements2026-09-01PDF 180.9 KB
Attstn Stmts parts 2.911(d)(5)(i)&(ii)Attestation Statements2026-09-01PDF 341.7 KB
Att Statements 2.911(d)(5)(7)Attestation Statements2026-05-07PDF 180.9 KB
Att Statements 2.911(d)(5)(i)Attestation Statements2026-05-07PDF 218 KB
Att Statements 2.911(d)(5)(ii)Attestation Statements2026-05-07PDF 219.4 KB
Agent Authorization LetterCover Letter(s)2026-09-01PDF 261.2 KB
C2PC Letter 1Cover Letter(s)2026-09-01PDF 205.7 KB
C2PC Letter 2Cover Letter(s)2026-09-01PDF 329.9 KB
Confidentiality Request LetterCover Letter(s)2026-09-01PDF 217.2 KB
Agent Authorization LetterCover Letter(s)2026-07-23PDF 234.5 KB
Condfidentiality Request LetterCover Letter(s)2026-07-23PDF 251.7 KB
Cover LetterCover Letter(s)2026-07-23PDF 229.7 KB
Modular Approval LetterCover Letter(s)2026-07-23PDF 235.8 KB
Authorization LetterCover Letter(s)2026-05-07PDF 232.4 KB
Confidentiality LetterCover Letter(s)2026-05-07PDF 216.9 KB
Cover LetterCover Letter(s)2026-05-07PDF 319.7 KB
Dismissal Request LetterCover Letter(s)2026-05-07PDF 194.7 KB
RF Exposure 1RF Exposure Info2026-09-01PDF 1 MB
RF Exposure 2RF Exposure Info2026-09-01PDF 948.6 KB
RF ExposureRF Exposure Info2026-07-23PDF 948.9 KB
RF ExposureRF Exposure Info2026-05-07PDF 995 KB
Block Diagram Metadata onlyBlock DiagramPDF 792.3 KB
Schematics Metadata onlySchematicsPDF 2.6 MB
Operational Description Metadata onlyOperational DescriptionPDF 700.3 KB
Operational Description VB-BOX-05 Metadata onlyOperational DescriptionPDF 521.2 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 238.6 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 340.4 KB

Application Information

Application ID6Cg+8ucDbLChFo8/3UTT9A==
Final Action Date2026-09-01
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0021921689
ModelMUF
Frequency Range902.75-927.25 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionRFID radio module
Responsible PartyPOITRAT Sylvain, s.poitrat@stid.com , +33 442 126 060
Non-Technical ContactDavid UU, STID NA Inc, d.uu@stid.com , 972-421-8405
Test FirmDavid MONTAULON, EMITECH Montpellier, d.montaulon@emitech-group.com , 33-4-67-871102
TCB Emailcb@industrial-ia.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
6Cg+8ucDbLChFo8/3UTT9A==2026-09-01Class II permissive change or modification of presently authorized equipment
DfP6UJfnZ3PqnSzSXRYgDA==2026-07-23Original Equipment
TIm45LphU+cbMt9jp6HmIg==2026-05-07Original Equipment

Equipment Authorization

FrequencyOutputRules
902.75-927.25 MHz0.43215C
902.75-927.25 MHz0.72315C

Grants

TCB Grant - Application TIm45LphU+cbMt9jp6HmIg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 05/07/2026

Application Dated: 04/24/2026
STid
20 Parc d'activites des Pradeaux
GREASQUE, 13850
France
 
Attention: POITRAT Sylvain , Technical Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OVNMUF
Name of Grantee:  STid
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID radio module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 0.432  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module is for the sole use of this grantee. The end-user shall have no manual instructions to remove or install the device.

This Module is limited due to not having been tested in standalone conditions. The grantee is required to perform the testing specified in the Integration Guide for each subsequent host device.


TCB Grant - Application DfP6UJfnZ3PqnSzSXRYgDA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 07/23/2026

Application Dated: 07/08/2026
STid
20 Parc d'activites des Pradeaux
GREASQUE, 13850
France
 
Attention: POITRAT Sylvain , Technical Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OVNMUF
Name of Grantee:  STid
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID radio module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 0.723  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure conditions.

Authorizes integration into STiD Readers, model numbers SNA-R5X SLA-R5X, SLA-W5X, SMA-R5X, SMA-W5X, SLI-W5X, SMI-W5X, SLE-W5X and SME-W5X with the ANT-SPECTRE antenna. This device and antenna must be installed and operated so as to provide a separation distance of at least 34 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance.

This Module is limited due to not having been tested in standalone conditions. The grantee is required to perform the testing specified in the Integration Guide for each subsequent host device.


TCB Grant - Application 6Cg+8ucDbLChFo8/3UTT9A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 09/01/2026

Application Dated: 09/01/2026
STid
20 Parc d'activites des Pradeaux
GREASQUE, 13850
France
 
Attention: POITRAT Sylvain , Technical Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OVNMUF
Name of Grantee:  STid
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID radio module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 0.432  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. This module is for the sole use of this grantee. The end-user shall have no manual instructions to remove or install the device.

This Module is limited due to not having been tested in standalone conditions. The grantee is required to perform the testing specified in the Integration Guide for each subsequent host device.

Class II Permissive Change: Authorizes integration into STiD Readers, model numbers SNA-R5X SLA-R5X, SLA-W5X, SMA-R5X, SMA-W5X, SLI-W5X, SMI-W5X, SLE-W5X and SME-W5X with the ANT-SPECTRE antenna. This device and antenna must be installed and operated so as to provide a separation distance of at least 34 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance.