FCC ID OWDTR-0020-E

M7100 UHF-L Mobile Radio

by HARRIS CORPORATION

Grantee Code: OWD   Product Code: TR0020E
Latest application date: 2007-09-20

FCC ID Device Details

FCC IDOWDTR-0020-E
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeOWD
Product CodeTR0020E
Applicant BusinessHARRIS CORPORATION 🇺🇸
Related Domains harris.com
Equipment ClassM7100 UHF-L Mobile Radio

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
378-430 MHzClass II permissive change or modification of presently authorized equipment2007-09-20
378-430 MHzClass II permissive change or modification of presently authorized equipment2005-04-26
378-430 MHzOriginal Equipment2004-03-11

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2007-09-20PDF 576.1 KB
Revised Motorcycle install manualUsers Manual2005-04-26PDF 2.8 MB
Revised Operator manualUsers Manual2005-04-26PDF 805 KB
ManualUsers Manual2004-03-11PDF 2.1 MB
Manual motorcycle installationUsers Manual2004-03-11PDF 2.2 MB
Motorcycle install revisedUsers Manual2004-03-11PDF 2.8 MB
Operational manual revisedUsers Manual2004-03-11PDF 715.1 KB
Vehicle install revisedUsers Manual2004-03-11PDF 1.3 MB
Internal photos 1Internal Photos2004-03-11PDF 2.4 MB
Internal photos 2Internal Photos2004-03-11PDF 2.7 MB
Separation Distance PhotoExternal Photos2005-04-26PDF 1,010 KB
External photosExternal Photos2004-03-11PDF 574.5 KB
FCC ID label infoID Label/Location Info2004-03-11PDF 285.4 KB
Test reportTest Report2007-09-20PDF 1 MB
Test report 1Test Report2004-03-11PDF 537.3 KB
Test report 2Test Report2004-03-11PDF 142.4 KB
POACover Letter(s)2007-09-20PDF 49.8 KB
Reason for PCCover Letter(s)2007-09-20PDF 54.3 KB
Request for confidentialityCover Letter(s)2007-09-20PDF 51.8 KB
Request for Grant note additionCover Letter(s)2005-04-26PDF 545 KB
ATCB commentsCover Letter(s)2004-03-11PDF 46.8 KB
Request for confidentialityCover Letter(s)2004-03-11PDF 73.6 KB
Response to ATCBCover Letter(s)2004-03-11PDF 42.7 KB
Response to FCC correspondence number 11887Cover Letter(s)2004-03-11PDF 51.2 KB
Revised MPE antenna 1RF Exposure Info2005-04-26PDF 98.4 KB
Revised MPE antenna 2RF Exposure Info2005-04-26PDF 98.4 KB
MPERF Exposure Info2004-03-11PDF 305.8 KB
MPE report revisedRF Exposure Info2004-03-11PDF 98.8 KB
Motorcycle MPE reportRF Exposure Info2004-03-11PDF 99.3 KB
RF information labelRF Exposure Info2004-03-11PDF 1.3 MB
Block diagram Metadata onlyBlock DiagramPDF 200.4 KB
Schematics Metadata onlySchematicsPDF 2.3 MB
Operational description 1 Metadata onlyOperational DescriptionPDF 354 KB
Operational description 2 Metadata onlyOperational DescriptionPDF 114.8 KB
Operational description 3 Metadata onlyOperational DescriptionPDF 151.6 KB
Parts list Metadata onlyParts List/Tune Up InfoPDF 198.1 KB
Tune up Metadata onlyParts List/Tune Up InfoPDF 31.9 KB

Application Information

Application IDVKla3CNgZSjIqgn49vBP9w==
Final Action Date2007-09-20
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004945812
ModelTR-0020-E
Frequency Range378-430 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionM7100 UHF-L Mobile Radio
Responsible PartyWilliam Pertner, Regulatory Manager, william.pertner@Harris.com , 434-455-9295
TCB Emailhotline@AmericanTCB.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant Comments90.210 is single-channel mode. Power is conducted and is variable between 50 and 15 Watts in 1 Watt increments. Output is at the antenna terminal of the device. For vehicle mounting the antenna used for this transmitter must be mounted at the center of the vehicle's roof and maximum antenna gain must not exceeding 5.5 dBi. For motorcycle mount the antenna(s) used for this transmitter must be installed using the mount kit described that provides a separation distance of at least 54 cm with a maximum antenna gain of 5.5 dBi and transmit power less than 25 W. This radio must operate in push-to-talk mode with a duty factor not exceeding 50%, must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting the exposure requirements and users must be provided with the training information. This device contains functions that are not operational in U.S Territories except as noted in the filing. This filing is only applicable for US operations. This PC is to allow use of this device in fixed installations or control stations (desk top and wall mount versions) and base station test unit applications. RF exposure compliance for use of this transmitter in fixed installations or control stations (desk top and wall mount versions) and base station test unit applications is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).”

Applications

Application IDDatePurpose
VKla3CNgZSjIqgn49vBP9w==2007-09-20Class II permissive change or modification of presently authorized equipment
lHeGMigqWK1Mhcz4KgO4PA==2005-04-26Class II permissive change or modification of presently authorized equipment
M+QXjJc2zx0sFCOdW3TH9w==2004-03-11Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
378-430 MHz541.5ppm10K7F1E90.21
378-430 MHz541.5ppm7K9F1E9
378-430 MHz541.5ppm11K0F3E90.21
378-430 MHz541.5ppm11K0F3E9
378-430 MHz541.5ppm8K6F1D90.21
378-430 MHz541.5ppm8K6F1D9
378-430 MHz541.5ppm8K60F1D90.21
378-430 MHz541.5ppm8K6F1E90.21
378-430 MHz541.5ppm8K6F1E9
378-430 MHz541.5ppm8K60F1E90.21
378-430 MHz541.5ppm5K3F1D90.21
378-430 MHz541.5ppm5K3F1D9
378-430 MHz541.5ppm5K30F1D90.21
378-430 MHz541.5ppm5K3F1E90.21
378-430 MHz541.5ppm5K3F1E9
378-430 MHz541.5ppm5K30F1E90.21
378-430 MHz541.5ppm10K7F1D90.21
378-430 MHz541.5ppm10K7F1D9
378-430 MHz541.5ppm7K9F1D90.21
378-430 MHz541.5ppm10K7F1E9
378-430 MHz541.5ppm7K90F1D90.21
378-430 MHz541.5ppm7K9F1E90.21
378-430 MHz541.5ppm7K9F1D9
378-430 MHz541.5ppm7K90F1E90.21

Grants

TCB Grant - Application VKla3CNgZSjIqgn49vBP9w==

TYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd">
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/20/2007

Application Dated: 09/19/2007
HARRIS CORPORATION
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
 
Attention: William Pertner , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OWDTR-0020-E
Name of Grantee:  HARRIS CORPORATION
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: M7100 UHF-L Mobile Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 378.0  -  430.0 54.0 1.5  PM 16K0F3E
90.210 378.0  -  430.0 54.0 1.5  PM 11K0F3E
90.210 378.0  -  430.0 54.0 1.5  PM 8K60F1D
90.210 378.0  -  430.0 54.0 1.5  PM 8K60F1E
90.210 378.0  -  430.0 54.0 1.5  PM 5K30F1D
90.210 378.0  -  430.0 54.0 1.5  PM 5K30F1E
90.210 378.0  -  430.0 54.0 1.5  PM 10K7F1D
90.210 378.0  -  430.0 54.0 1.5  PM 7K90F1D
90.210 378.0  -  430.0 54.0 1.5  PM 7K90F1E
90.210 378.0  -  430.0 54.0 1.5  PM 10K7F1E

90.210 is single-channel mode. Power is conducted and is variable between 50 and 15 Watts in 1 Watt increments. Output is at the antenna terminal of the device. For vehicle mounting the antenna used for this transmitter must be mounted at the center of the vehicle's roof and maximum antenna gain must not exceeding 5.5 dBi. For motorcycle mount the antenna(s) used for this transmitter must be installed using the mount kit described that provides a separation distance of at least 54 cm with a maximum antenna gain of 5.5 dBi and transmit power less than 25 W. This radio must operate in push-to-talk mode with a duty factor not exceeding 50%, must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting the exposure requirements and users must be provided with the training information. This device contains functions that are not operational in U.S Territories except as noted in the filing. This filing is only applicable for US operations. This PC is to allow use of this device in fixed installations or control stations (desk top and wall mount versions) and base station test unit applications. RF exposure compliance for use of this transmitter in fixed installations or control stations (desk top and wall mount versions) and base station test unit applications is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

EAS Grant - Application VKla3CNgZSjIqgn49vBP9w==

TYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd">
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HARRIS CORPORATION
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States
  Date of Grant: 09/20/2007

Application Dated: 09/19/2007
 
Attention: William Pertner , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OWDTR-0020-E
Name of Grantee:  HARRIS CORPORATION
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: M7100 UHF-L Mobile Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 378.0  -  430.0 54.0 1.5  PM 16K0F3E
90.210 378.0  -  430.0 54.0 1.5  PM 11K0F3E
90.210 378.0  -  430.0 54.0 1.5  PM 8K60F1D
90.210 378.0  -  430.0 54.0 1.5  PM 8K60F1E
90.210 378.0  -  430.0 54.0 1.5  PM 5K30F1D
90.210 378.0  -  430.0 54.0 1.5  PM 5K30F1E
90.210 378.0  -  430.0 54.0 1.5  PM 10K7F1D
90.210 378.0  -  430.0 54.0 1.5  PM 7K90F1D
90.210 378.0  -  430.0 54.0 1.5  PM 7K90F1E
90.210 378.0  -  430.0 54.0 1.5  PM 10K7F1E

90.210 is single-channel mode. Power is conducted and is variable between 50 and 15 Watts in 1 Watt increments. Output is at the antenna terminal of the device. For vehicle mounting the antenna used for this transmitter must be mounted at the center of the vehicle's roof and maximum antenna gain must not exceeding 5.5 dBi. For motorcycle mount the antenna(s) used for this transmitter must be installed using the mount kit described that provides a separation distance of at least 54 cm with a maximum antenna gain of 5.5 dBi and transmit power less than 25 W. This radio must operate in push-to-talk mode with a duty factor not exceeding 50%, must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting the exposure requirements and users must be provided with the training information. This device contains functions that are not operational in U.S Territories except as noted in the filing. This filing is only applicable for US operations. This PC is to allow use of this device in fixed installations or control stations (desk top and wall mount versions) and base station test unit applications. RF exposure compliance for use of this transmitter in fixed installations or control stations (desk top and wall mount versions) and base station test unit applications is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).



Mail To:


EA636861

TCB Grant - Application M+QXjJc2zx0sFCOdW3TH9w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 03/11/2004

Application Dated: 03/11/2004
HARRIS CORPORATION
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
 
Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OWDTR-0020-E
Name of Grantee:  HARRIS CORPORATION
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: M7100 UHF-L Mobile Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 378.0  -  430.0 54.0 1.5  PM 16K0F3E
90 378.0  -  430.0 54.0 1.5  PM 11K0F3E
90 378.0  -  430.0 54.0 1.5  PM 8K6F1D
90 378.0  -  430.0 54.0 1.5  PM 8K6F1E
90 378.0  -  430.0 54.0 1.5  PM 5K3F1D
90 378.0  -  430.0 54.0 1.5  PM 5K3F1E
90 378.0  -  430.0 54.0 1.5  PM 10K7F1D
90 378.0  -  430.0 54.0 1.5  PM 10K7F1E
90 378.0  -  430.0 54.0 1.5  PM 7K9F1D
90 378.0  -  430.0 54.0 1.5  PM 7K9F1E

Power output is conducted. Device must operate with a maximum duty factor not exceeding 50% to satisfy RF exposure compliance requirements. The motorcycle mounted antenna used for this transmitter must not exceed 5.5dBi gain and must be installed to provide a minimum seperation distance of 85.23 cm from persons in a controlled environment and a minimum separation distance of 190.6cm from persons in an uncontrolled environment to satisfy rf exposure requirements of 2.1091. The vehicle mounted antenna used for this transmitter must be installed to provide a minimum seperation distance of 57.93cm from persons in a controlled environment and a minimum separation distance of 129.5 cm in an uncontrolled enviropnment to satisfy rf exposure requirements of 2.1091. All qualified end users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit.

EAS Grant - Application M+QXjJc2zx0sFCOdW3TH9w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HARRIS CORPORATION
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States
  Date of Grant: 03/11/2004

Application Dated: 03/11/2004
 
Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OWDTR-0020-E
Name of Grantee:  HARRIS CORPORATION
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: M7100 UHF-L Mobile Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 378.0  -  430.0 54.0 1.5  PM 16K0F3E
90 378.0  -  430.0 54.0 1.5  PM 11K0F3E
90 378.0  -  430.0 54.0 1.5  PM 8K6F1D
90 378.0  -  430.0 54.0 1.5  PM 8K6F1E
90 378.0  -  430.0 54.0 1.5  PM 5K3F1D
90 378.0  -  430.0 54.0 1.5  PM 5K3F1E
90 378.0  -  430.0 54.0 1.5  PM 10K7F1D
90 378.0  -  430.0 54.0 1.5  PM 10K7F1E
90 378.0  -  430.0 54.0 1.5  PM 7K9F1D
90 378.0  -  430.0 54.0 1.5  PM 7K9F1E

Power output is conducted. Device must operate with a maximum duty factor not exceeding 50% to satisfy RF exposure compliance requirements. The motorcycle mounted antenna used for this transmitter must not exceed 5.5dBi gain and must be installed to provide a minimum seperation distance of 85.23 cm from persons in a controlled environment and a minimum separation distance of 190.6cm from persons in an uncontrolled environment to satisfy rf exposure requirements of 2.1091. The vehicle mounted antenna used for this transmitter must be installed to provide a minimum seperation distance of 57.93cm from persons in a controlled environment and a minimum separation distance of 129.5 cm in an uncontrolled enviropnment to satisfy rf exposure requirements of 2.1091. All qualified end users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit.



TCB Grant - Application lHeGMigqWK1Mhcz4KgO4PA==

This application does not exist.

EAS Grant - Application lHeGMigqWK1Mhcz4KgO4PA==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HARRIS CORPORATION
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States
  Date of Grant: 04/26/2005

Application Dated: 03/18/2005
 
Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OWDTR-0020-E
Name of Grantee:  HARRIS CORPORATION
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: M7100 UHF-L Mobile Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 378.0  -  430.0 54.0 1.5  PM 16K0F3E
90.210 378.0  -  430.0 54.0 1.5  PM 11K0F3E
90.210 378.0  -  430.0 54.0 1.5  PM 8K6F1D
90.210 378.0  -  430.0 54.0 1.5  PM 8K6F1E
90.210 378.0  -  430.0 54.0 1.5  PM 5K3F1D
90.210 378.0  -  430.0 54.0 1.5  PM 5K3F1E
90.210 378.0  -  430.0 54.0 1.5  PM 10K7F1D
90.210 378.0  -  430.0 54.0 1.5  PM 7K9F1D
90.210 378.0  -  430.0 54.0 1.5  PM 7K9F1E
90.210 378.0  -  430.0 54.0 1.5  PM 10K7F1E

Power is conducted and is variable between 50 and 15 Watts in 1 Watt increments. Output is at the antenna terminal of the device. For vehicle mounting the antenna used for this transmitter must be mounted at the center of the vehicle's roof and maximum antenna gain must not exceeding 5.5 dBi. For motorcycle mount the antenna(s) used for this transmitter must be installed using the mount kit described that provides a separation distance of at least 54 cm with a maximum antenna gain of 5.5 dBi and transmit power less than 25 W. This radio must operate in push-to-talk mode with a duty factor not exceeding 50%, must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting the exposure requirements and users must be provided with the training information.

90.210 is single-channel mode.



Mail To: