FCC ID OWDTR-0021-E

M7100 UHF-H Mobile Radio

by HARRIS CORPORATION

Grantee Code: OWD   Product Code: TR0021E
Latest application date: 2007-09-20

FCC ID Device Details

FCC IDOWDTR-0021-E
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeOWD
Product CodeTR0021E
Applicant BusinessHARRIS CORPORATION 🇺🇸
Related Domains harris.com
Equipment ClassM7100 UHF-H Mobile Radio

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
450-512 MHzClass II permissive change or modification of presently authorized equipment2007-09-20
450-512 MHzClass II permissive change or modification of presently authorized equipment2005-04-28
450-512 MHzOriginal Equipment2004-04-07

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2007-09-20PDF 576.1 KB
Operators manualUsers Manual2005-04-28PDF 804.6 KB
PDF of Install ManualUsers Manual2005-04-28PDF 2.8 MB
Manual installation 1Users Manual2004-04-07PDF 2.2 MB
Manual installation 2Users Manual2004-04-07PDF 1.3 MB
Manual operatorUsers Manual2004-04-07PDF 714.1 KB
Internal photos 1Internal Photos2004-04-07PDF 2.6 MB
Internal photos 2Internal Photos2004-04-07PDF 2.4 MB
Separation distance photoExternal Photos2005-04-28PDF 1,013.5 KB
External photosExternal Photos2004-04-07PDF 573.2 KB
FCC ID infoID Label/Location Info2004-04-07PDF 502.3 KB
Setup photosTest Setup Photos2007-09-20PDF 2.1 MB
Test reportTest Report2007-09-20PDF 936.5 KB
Test report revisedTest Report2004-04-07PDF 644 KB
ATCB commentsCover Letter(s)2007-09-20PDF 10.7 KB
POACover Letter(s)2007-09-20PDF 50.3 KB
Reason for PC 2Cover Letter(s)2007-09-20PDF 54.3 KB
Request for ConfidentialityCover Letter(s)2007-09-20PDF 52.1 KB
Response to ATCBCover Letter(s)2007-09-20PDF 20.5 KB
C II PC letter requestCover Letter(s)2005-04-28PDF 544 KB
ATCB commentsCover Letter(s)2004-04-07PDF 47 KB
POACover Letter(s)2004-04-07PDF 74.4 KB
Request for confidentialityCover Letter(s)2004-04-07PDF 73.6 KB
Resposne to ATCBCover Letter(s)2004-04-07PDF 127.8 KB
MPE calculation antenna version 1 - 490mhzRF Exposure Info2005-04-28PDF 540.5 KB
MPE calculation antenna version 3 - 450mhzRF Exposure Info2005-04-28PDF 540.5 KB
MPE calculation antenna version 4 - 450mhzRF Exposure Info2005-04-28PDF 540.5 KB
MPE calculationantenna version 2 - 470mhzRF Exposure Info2005-04-28PDF 540.5 KB
MPE 1RF Exposure Info2004-04-07PDF 98.3 KB
MPE 2RF Exposure Info2004-04-07PDF 98.5 KB
MPE 3RF Exposure Info2004-04-07PDF 98.3 KB
MPE 4RF Exposure Info2004-04-07PDF 98.3 KB
Block diagram Metadata onlyBlock DiagramPDF 108.8 KB
Schematics Metadata onlySchematicsPDF 2.3 MB
Theory of operations Metadata onlyOperational DescriptionPDF 353.6 KB
Parts list Metadata onlyParts List/Tune Up InfoPDF 205.5 KB
Tuneup Metadata onlyParts List/Tune Up InfoPDF 39.9 KB

Application Information

Application IDJ/Lc1HaCQVpBuSH3uzcqPQ==
Final Action Date2007-09-20
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004945812
ModelTR-0021-E
Frequency Range450-512 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionM7100 UHF-H Mobile Radio
Responsible PartyWilliam Pertner, Regulatory Manager, william.pertner@Harris.com , 434-455-9295
TCB Emailhotline@AmericanTCB.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output is conducted. Device must operate with a maximum duty factor not exceeding 50% to satisfy RF exposure compliance requirements. The motorcycle-mounted antenna used for this transmitter in factory-preset 25 W mode must not exceed 5.5dBi gain and must be installed to provide a minimum separation distance of 49.7 cm from persons for operation in controlled RF exposure environment, and a minimum separation distance of 111.2 cm from persons in an uncontrolled environment, to satisfy RF exposure requirements of 2.1091 and 1.1310. The vehicle-mounted antenna used for this transmitter must be installed to provide a minimum separation distance of 68.6 cm from persons in a controlled environment and a minimum separation distance of 153.4 cm in an uncontrolled environment to satisfy RF exposure requirements of 2.1091and 1.1310. All qualified end users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. This filing is only applicable for US operations. This PC is to allow use of this device in fixed installations or control stations (desk top and wall mount versions) and base station test unit applications. RF exposure compliance for use of this transmitter in fixed installations or control stations (desk top and wall mount versions) and base station test unit applications is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

Applications

Application IDDatePurpose
J/Lc1HaCQVpBuSH3uzcqPQ==2007-09-20Class II permissive change or modification of presently authorized equipment
TTSz73amJrhTspDkDgLe1A==2005-04-28Class II permissive change or modification of presently authorized equipment
qpwgp/XQeh6tH0QlaOStKA==2004-04-07Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
450-512 MHz540.2ppm8K1F1E9
450-512 MHz540.2ppm8K1F1E9BC
450-512 MHz540.2ppm8K10F1E9BC
450-512 MHz540.2ppm11K0F3E9
450-512 MHz540.2ppm11K0F3E9BC
450-512 MHz540.2ppm8K3F1D9
450-512 MHz540.2ppm8K3F1D9BC
450-512 MHz540.2ppm8K30F1D9BC
450-512 MHz540.2ppm8K3F1E9
450-512 MHz540.2ppm8K3F1E9BC
450-512 MHz540.2ppm8K30F1E9BC
450-512 MHz540.2ppm5K3F1D9
450-512 MHz540.2ppm5K3F1D9BC
450-512 MHz540.2ppm5K30F1D9BC
450-512 MHz540.2ppm5K3F1E9
450-512 MHz540.2ppm5K3F1E9BC
450-512 MHz540.2ppm5K30F1E9BC
450-512 MHz540.2ppm10K3F1D9
450-512 MHz540.2ppm10K3F1D9BC
450-512 MHz540.2ppm10K3F1E9
450-512 MHz540.2ppm10K3F1E9BC
450-512 MHz540.2ppm8K1F1D9
450-512 MHz540.2ppm8K1F1D9BC
450-512 MHz540.2ppm8K10F1D9BC

Grants

TCB Grant - Application TTSz73amJrhTspDkDgLe1A==

This application does not exist.

EAS Grant - Application TTSz73amJrhTspDkDgLe1A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HARRIS CORPORATION
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States
  Date of Grant: 04/28/2005

Application Dated: 03/16/2005
 
Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OWDTR-0021-E
Name of Grantee:  HARRIS CORPORATION
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: M7100 UHF-H Mobile Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 450.0  -  512.0 54.0 0.2  PM 16K0F3E
BC 90 450.0  -  512.0 54.0 0.2  PM 11K0F3E
BC 90 450.0  -  512.0 54.0 0.2  PM 8K3F1D
BC 90 450.0  -  512.0 54.0 0.2  PM 8K3F1E
BC 90 450.0  -  512.0 54.0 0.2  PM 5K3F1D
BC 90 450.0  -  512.0 54.0 0.2  PM 5K3F1E
BC 90 450.0  -  512.0 54.0 0.2  PM 10K3F1D
BC 90 450.0  -  512.0 54.0 0.2  PM 10K3F1E
BC 90 450.0  -  512.0 54.0 0.2  PM 8K1F1D
BC 90 450.0  -  512.0 54.0 0.2  PM 8K1F1E

Power output is conducted. Device must operate with a maximum duty factor not exceeding 50% to satisfy RF exposure compliance requirements. The motorcycle-mounted antenna used for this transmitter in factory-preset 25 W mode must not exceed 5.5dBi gain and must be installed to provide a minimum separation distance of 49.7 cm from persons for operation in controlled RF exposure environment, and a minimum separation distance of 111.2 cm from persons in an uncontrolled environment, to satisfy RF exposure requirements of 2.1091 and 1.1310. The vehicle-mounted antenna used for this transmitter must be installed to provide a minimum separation distance of 68.6 cm from persons in a controlled environment and a minimum separation distance of 153.4 cm in an uncontrolled environment to satisfy RF exposure requirements of 2.1091and 1.1310. All qualified end users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application qpwgp/XQeh6tH0QlaOStKA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/07/2004

Application Dated: 04/07/2004
HARRIS CORPORATION
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
 
Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OWDTR-0021-E
Name of Grantee:  HARRIS CORPORATION
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: M7100 UHF-H Mobile Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 450.0  -  512.0 54.0 0.2  PM 16K0F3E
90 450.0  -  512.0 54.0 0.2  PM 11K0F3E
90 450.0  -  512.0 54.0 0.2  PM 8K3F1D
90 450.0  -  512.0 54.0 0.2  PM 8K3F1E
90 450.0  -  512.0 54.0 0.2  PM 5K3F1D
90 450.0  -  512.0 54.0 0.2  PM 5K3F1E
90 450.0  -  512.0 54.0 0.2  PM 10K3F1D
90 450.0  -  512.0 54.0 0.2  PM 10K3F1E
90 450.0  -  512.0 54.0 0.2  PM 8K1F1D
90 450.0  -  512.0 54.0 0.2  PM 8K1F1E

Power output is conducted. This device must operate with a maximum duty factor not exceeding 50% to satisfy RF exposure compliance requirements. The motorcycle mounted antenna used for this transmitter must not exceed 5.5dBi gain and must be installed to provide a seperation distance of 68.62 cm or more from persons to satisfy MPE categorical exclusion requirements of 2.1091 in a controlled environment. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application qpwgp/XQeh6tH0QlaOStKA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HARRIS CORPORATION
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States
  Date of Grant: 04/07/2004

Application Dated: 04/07/2004
 
Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OWDTR-0021-E
Name of Grantee:  HARRIS CORPORATION
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: M7100 UHF-H Mobile Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 450.0  -  512.0 54.0 0.2  PM 16K0F3E
90 450.0  -  512.0 54.0 0.2  PM 11K0F3E
90 450.0  -  512.0 54.0 0.2  PM 8K3F1D
90 450.0  -  512.0 54.0 0.2  PM 8K3F1E
90 450.0  -  512.0 54.0 0.2  PM 5K3F1D
90 450.0  -  512.0 54.0 0.2  PM 5K3F1E
90 450.0  -  512.0 54.0 0.2  PM 10K3F1D
90 450.0  -  512.0 54.0 0.2  PM 10K3F1E
90 450.0  -  512.0 54.0 0.2  PM 8K1F1D
90 450.0  -  512.0 54.0 0.2  PM 8K1F1E

Power output is conducted. This device must operate with a maximum duty factor not exceeding 50% to satisfy RF exposure compliance requirements. The motorcycle mounted antenna used for this transmitter must not exceed 5.5dBi gain and must be installed to provide a seperation distance of 68.62 cm or more from persons to satisfy MPE categorical exclusion requirements of 2.1091 in a controlled environment. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application J/Lc1HaCQVpBuSH3uzcqPQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/20/2007

Application Dated: 09/19/2007
HARRIS CORPORATION
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
 
Attention: William Pertner , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OWDTR-0021-E
Name of Grantee:  HARRIS CORPORATION
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: M7100 UHF-H Mobile Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 450.0  -  512.0 54.0 0.2  PM 16K0F3E
BC 90 450.0  -  512.0 54.0 0.2  PM 11K0F3E
BC 90 450.0  -  512.0 54.0 0.2  PM 8K30F1D
BC 90 450.0  -  512.0 54.0 0.2  PM 8K30F1E
BC 90 450.0  -  512.0 54.0 0.2  PM 5K30F1D
BC 90 450.0  -  512.0 54.0 0.2  PM 5K30F1E
BC 90 450.0  -  512.0 54.0 0.2  PM 10K3F1D
BC 90 450.0  -  512.0 54.0 0.2  PM 10K3F1E
BC 90 450.0  -  512.0 54.0 0.2  PM 8K10F1D
BC 90 450.0  -  512.0 54.0 0.2  PM 8K10F1E

Power output is conducted. Device must operate with a maximum duty factor not exceeding 50% to satisfy RF exposure compliance requirements. The motorcycle-mounted antenna used for this transmitter in factory-preset 25 W mode must not exceed 5.5dBi gain and must be installed to provide a minimum separation distance of 49.7 cm from persons for operation in controlled RF exposure environment, and a minimum separation distance of 111.2 cm from persons in an uncontrolled environment, to satisfy RF exposure requirements of 2.1091 and 1.1310. The vehicle-mounted antenna used for this transmitter must be installed to provide a minimum separation distance of 68.6 cm from persons in a controlled environment and a minimum separation distance of 153.4 cm in an uncontrolled environment to satisfy RF exposure requirements of 2.1091and 1.1310. All qualified end users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. This filing is only applicable for US operations. This PC is to allow use of this device in fixed installations or control stations (desk top and wall mount versions) and base station test unit applications. RF exposure compliance for use of this transmitter in fixed installations or control stations (desk top and wall mount versions) and base station test unit applications is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application J/Lc1HaCQVpBuSH3uzcqPQ==

TYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd">
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HARRIS CORPORATION
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States
  Date of Grant: 09/20/2007

Application Dated: 09/19/2007
 
Attention: William Pertner , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OWDTR-0021-E
Name of Grantee:  HARRIS CORPORATION
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: M7100 UHF-H Mobile Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 450.0  -  512.0 54.0 0.2  PM 16K0F3E
BC 90 450.0  -  512.0 54.0 0.2  PM 11K0F3E
BC 90 450.0  -  512.0 54.0 0.2  PM 8K30F1D
BC 90 450.0  -  512.0 54.0 0.2  PM 8K30F1E
BC 90 450.0  -  512.0 54.0 0.2  PM 5K30F1D
BC 90 450.0  -  512.0 54.0 0.2  PM 5K30F1E
BC 90 450.0  -  512.0 54.0 0.2  PM 10K3F1D
BC 90 450.0  -  512.0 54.0 0.2  PM 10K3F1E
BC 90 450.0  -  512.0 54.0 0.2  PM 8K10F1D
BC 90 450.0  -  512.0 54.0 0.2  PM 8K10F1E

Power output is conducted. Device must operate with a maximum duty factor not exceeding 50% to satisfy RF exposure compliance requirements. The motorcycle-mounted antenna used for this transmitter in factory-preset 25 W mode must not exceed 5.5dBi gain and must be installed to provide a minimum separation distance of 49.7 cm from persons for operation in controlled RF exposure environment, and a minimum separation distance of 111.2 cm from persons in an uncontrolled environment, to satisfy RF exposure requirements of 2.1091 and 1.1310. The vehicle-mounted antenna used for this transmitter must be installed to provide a minimum separation distance of 68.6 cm from persons in a controlled environment and a minimum separation distance of 153.4 cm in an uncontrolled environment to satisfy RF exposure requirements of 2.1091and 1.1310. All qualified end users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. This filing is only applicable for US operations. This PC is to allow use of this device in fixed installations or control stations (desk top and wall mount versions) and base station test unit applications. RF exposure compliance for use of this transmitter in fixed installations or control stations (desk top and wall mount versions) and base station test unit applications is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:


EA157698