FCC ID OWDTR-0035-E

M7100 VHF Mobile, 8-50W

by HARRIS CORPORATION

Grantee Code: OWD   Product Code: TR0035E
Latest application date: 2013-11-13

FCC ID Device Details

FCC IDOWDTR-0035-E
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeOWD
Product CodeTR0035E
Applicant BusinessHARRIS CORPORATION 🇺🇸
Related Domains harris.com
Equipment ClassM7100 VHF Mobile, 8-50W
Test FirmRhein Tech Laboratories, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
136-174 MHzClass II permissive change or modification of presently authorized equipment2013-11-13
136-174 MHzClass II permissive change or modification of presently authorized equipment2007-09-17
136-174 MHzClass II permissive change or modification of presently authorized equipment2006-12-12
136-174 MHzOriginal Equipment2005-03-21

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2007-09-17PDF 576.1 KB
Install manualUsers Manual2005-03-21PDF 2.8 MB
Installation ManualUsers Manual2005-03-21PDF 1.4 MB
Manual with additonsUsers Manual2005-03-21PDF 795.6 KB
Motorcycle ManualUsers Manual2005-03-21PDF 2.8 MB
Operator manualUsers Manual2005-03-21PDF 804 KB
Operators ManualUsers Manual2005-03-21PDF 746.2 KB
Revised Operator ManualUsers Manual2005-03-21PDF 805 KB
Revised motorcycle installation manualUsers Manual2005-03-21PDF 2.8 MB
Internal photosInternal Photos2006-12-12PDF 310.4 KB
Internal Photos 1Internal Photos2005-03-21PDF 1.8 MB
Internal Photos 2Internal Photos2005-03-21PDF 2.9 MB
Internal Photos 3Internal Photos2005-03-21PDF 3.7 MB
Internal Photos 4Internal Photos2005-03-21PDF 3.9 MB
Internal Photos 5Internal Photos2005-03-21PDF 2.4 MB
Internal Photos 6Internal Photos2005-03-21PDF 2.4 MB
External Photos 1External Photos2005-03-21PDF 1.9 MB
External Photos 2External Photos2005-03-21PDF 1.7 MB
MPE separation distance photoExternal Photos2005-03-21PDF 1,016.5 KB
ID LabelID Label/Location Info2005-03-21PDF 1.8 MB
RF Label 1ID Label/Location Info2005-03-21PDF 2.7 MB
RF Label 2ID Label/Location Info2005-03-21PDF 2.3 MB
Test Setup PhotosTest Setup Photos2013-11-13PDF 378.8 KB
set up photosTest Setup Photos2007-09-17PDF 2.1 MB
Test PhotosTest Setup Photos2005-03-21PDF 1.3 MB
Test Report TNBTest Report2013-11-13PDF 1.3 MB
Test reportTest Report2007-09-17PDF 978.2 KB
Test reportTest Report2006-12-12PDF 1.3 MB
Test ReportTest Report2005-03-21PDF 1.1 MB
Extended Frequency LetterCover Letter(s)2013-11-13PDF 86.8 KB
Authorization LetterCover Letter(s)2013-11-13PDF 81.2 KB
Permissive Change LetterCover Letter(s)2013-11-13PDF 80.7 KB
POACover Letter(s)2007-09-17PDF 51.6 KB
Reason for PCCover Letter(s)2007-09-17PDF 55.9 KB
Request for confidentialityCover Letter(s)2007-09-17PDF 51.9 KB
POACover Letter(s)2006-12-12PDF 53.9 KB
Reason for PCCover Letter(s)2006-12-12PDF 57.3 KB
Request for confidentialityCover Letter(s)2006-12-12PDF 56.2 KB
Agent AuthorizationCover Letter(s)2005-03-21PDF 75.3 KB
CRN response letterCover Letter(s)2005-03-21PDF 73.1 KB
ConfidentialityCover Letter(s)2005-03-21PDF 75.3 KB
Cover LetterCover Letter(s)2005-03-21PDF 78.5 KB
Response letterCover Letter(s)2005-03-21PDF 81.4 KB
MPE MotorcycleRF Exposure Info2005-03-21PDF 98.9 KB
MPE RoofRF Exposure Info2005-03-21PDF 98.8 KB
MPE separation distance photoRF Exposure Info2005-03-21PDF 99.7 KB
Revised MPE calculationRF Exposure Info2005-03-21PDF 333.2 KB
Block Diagrams Metadata onlyBlock DiagramPDF 126.7 KB
Schematics Metadata onlySchematicsPDF 1.2 MB
Schematics Metadata onlySchematicsPDF 2.2 MB
Antenna Datasheet Metadata onlyOperational DescriptionPDF 174.7 KB
Antenna Installation Metadata onlyOperational DescriptionPDF 117.8 KB
Operational Description Metadata onlyOperational DescriptionPDF 263.3 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 620.1 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 58 KB
Tune Up Metadata onlyParts List/Tune Up InfoPDF 30.4 KB

Application Information

Application IDBJ5jKKN6pwSDAwpNZ+LrTA==
Final Action Date2013-11-13
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004945812
ModelTR-0035-E
Frequency Range136-174 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionM7100 VHF Mobile, 8-50W
Responsible PartyWilliam Pertner, Regulatory Manager, william.pertner@Harris.com , 434-455-9295
Technical ContactRick McMurray, Rhein Tech Labs, atcbinfo@rheintech.com , 7036890368
Test FirmRichard McMurray, Rhein Tech Laboratories, Inc., rmcmurray@rheintech.com , 703-689-0368
TCB Emailhotline@acbcert.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower is conducted. Output is at the antenna terminal of the device. For vehicle mounting the antenna used for this transmitter must be mounted at the center of the vehicle's roof and maximum antenna gain must not exceeding 2.2dBi. For motorcycle mount the antenna(s) used for this transmitter must be installed using the mount kit described that provides a separation distance of at least 54 cm with a maximum antenna gain of 4.5dBi and transmit power less than 25W. This radio must operate in push-to-talk mode with a duty factor not exceeding 50%, must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting the exposure requirements and users must be provided with the training information. This device contains functions that are not operational in U.S Territories except as noted in the filing. This filing is only applicable for US operations. This PC adds use of a mobile radio in fixed installations of control stations (desk top and wall mount versions) and base station test unit applications. Class 2 Permissive Change on the M7100 50W Mobile Radio with regard to the addition of Part 22 in the VHF band.

Applications

Application IDDatePurpose
BJ5jKKN6pwSDAwpNZ+LrTA==2013-11-13Class II permissive change or modification of presently authorized equipment
WfFUl+IpaZf59sO5gGw67Q==2007-09-17Class II permissive change or modification of presently authorized equipment
iSqikzm2WoNnBhWi1uJwsQ==2006-12-12Class II permissive change or modification of presently authorized equipment
vTOdoNXzmZwfpMesQ7hcPg==2005-03-21Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
136-174 MHz51.522ppm8K4F1E80, 9BC
136-174 MHz51.522ppm8K40F1E22, 80, 9BC, EF
136-174 MHz51.522ppm8K40F1E80, 9BC
136-174 MHz51.525ppm11K0F3E80, 9BC
136-174 MHz51.525ppm11K0F3E22, 80, 9BC, EF
136-174 MHz51.522ppm14K2F1D80, 9BC
136-174 MHz51.522ppm14K2F1D22, 8BC, EF
136-174 MHz51.522ppm14K2F1E80, 9BC
136-174 MHz51.522ppm14K2F1E22, 8BC, EF
136-174 MHz51.522ppm9K9F1D80, 9BC
136-174 MHz51.522ppm9K90F1D22, 80, 9BC, EF
136-174 MHz51.522ppm9K90F1D80, 9BC
136-174 MHz51.522ppm9K9F1E80, 9BC
136-174 MHz51.522ppm9K90F1E22, 80, 9BC, EF
136-174 MHz51.522ppm9K90F1E80, 9BC
136-174 MHz51.522ppm7K1F1D80, 9BC
136-174 MHz51.522ppm7K10F1D22, 80, 9BC, EF
136-174 MHz51.522ppm7K10F1D80, 9BC
136-174 MHz51.522ppm7K1F1E80, 9BC
136-174 MHz51.522ppm7K10F1E22, 80, 9BC, EF
136-174 MHz51.522ppm7K10F1E80, 9BC
136-174 MHz51.522ppm8K4F1D80, 9BC
136-174 MHz51.522ppm8K40F1D22, 80, 9BC, EF
136-174 MHz51.522ppm8K40F1D80, 9BC

Grants

TCB Grant - Application WfFUl+IpaZf59sO5gGw67Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/17/2007

Application Dated: 09/14/2007
HARRIS CORPORATION
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
 
Attention: William Pertner , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OWDTR-0035-E
Name of Grantee:  HARRIS CORPORATION
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: M7100 VHF Mobile, 8-50W
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 80, 90 136.0  -  174.0 51.52 5.0  PM 16K0F3E
BC 80, 90 136.0  -  174.0 51.52 5.0  PM 11K0F3E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 14K2F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 14K2F1E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 9K90F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 9K90F1E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 7K10F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 7K10F1E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 8K40F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 8K40F1E

Power is conducted. Output is at the antenna terminal of the device. For vehicle mounting the antenna used for this transmitter must be mounted at the center of the vehicle's roof and maximum antenna gain must not exceeding 2.2 dBi. For motorcycle mount the antenna(s) used for this transmitter must be installed using the mount kit described that provides a separation distance of at least 54 cm with a maximum antenna gain of 4.5 dBi and transmit power less than 25 W. This radio must operate in push-to-talk mode with a duty factor not exceeding 50%, must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting the exposure requirements and users must be provided with the training information. This device contains functions that are not operational in U.S Territories except as noted in the filing. This filing is only applicable for US operations. This PC adds use of a mobile radio in fixed installations of control stations (desk top and wall mount versions) and base station test unit applications. RF exposure compliance for use of this transmitter in fixed installations or control stations (desk top and wall mount versions) and base station test unit applications is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application WfFUl+IpaZf59sO5gGw67Q==

TYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd">
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HARRIS CORPORATION
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States
  Date of Grant: 09/17/2007

Application Dated: 09/14/2007
 
Attention: William Pertner , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OWDTR-0035-E
Name of Grantee:  HARRIS CORPORATION
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: M7100 VHF Mobile, 8-50W
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 80, 90 136.0  -  174.0 51.52 5.0  PM 16K0F3E
BC 80, 90 136.0  -  174.0 51.52 5.0  PM 11K0F3E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 14K2F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 14K2F1E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 9K90F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 9K90F1E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 7K10F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 7K10F1E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 8K40F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 8K40F1E

Power is conducted. Output is at the antenna terminal of the device. For vehicle mounting the antenna used for this transmitter must be mounted at the center of the vehicle's roof and maximum antenna gain must not exceeding 2.2 dBi. For motorcycle mount the antenna(s) used for this transmitter must be installed using the mount kit described that provides a separation distance of at least 54 cm with a maximum antenna gain of 4.5 dBi and transmit power less than 25 W. This radio must operate in push-to-talk mode with a duty factor not exceeding 50%, must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting the exposure requirements and users must be provided with the training information. This device contains functions that are not operational in U.S Territories except as noted in the filing. This filing is only applicable for US operations. This PC adds use of a mobile radio in fixed installations of control stations (desk top and wall mount versions) and base station test unit applications. RF exposure compliance for use of this transmitter in fixed installations or control stations (desk top and wall mount versions) and base station test unit applications is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:


EA834755

TCB Grant - Application vTOdoNXzmZwfpMesQ7hcPg==

This application does not exist.

EAS Grant - Application vTOdoNXzmZwfpMesQ7hcPg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HARRIS CORPORATION
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States
  Date of Grant: 03/21/2005

Application Dated: 12/21/2004
 
Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OWDTR-0035-E
Name of Grantee:  HARRIS CORPORATION
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: M7100 VHF Mobile, 8-50W
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 80, 90 136.0  -  174.0 51.52 5.0  PM 16K0F3E
BC 80, 90 136.0  -  174.0 51.52 5.0  PM 11K0F3E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 14K2F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 14K2F1E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 9K9F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 9K9F1E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 7K1F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 7K1F1E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 8K4F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 8K4F1E

Power is conducted. Output is at the antenna terminal of the device. For vehicle mounting the antenna used for this transmitter must be mounted at the center of the vehicle's roof and maximum antenna gain must not exceeding 2.2 dBi. For motorcycle mount the antenna(s) used for this transmitter must be installed using the mount kit described that provides a separation distance of at least 54 cm with a maximum antenna gain of 4.5 dBi and transmit power less than 25 W. This radio must operate in push-to-talk mode with a duty factor not exceeding 50%, must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting the exposure requirements and users must be provided with the training information.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application iSqikzm2WoNnBhWi1uJwsQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/12/2006

Application Dated: 12/11/2006
HARRIS CORPORATION
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
 
Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OWDTR-0035-E
Name of Grantee:  HARRIS CORPORATION
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: M7100 VHF Mobile, 8-50W
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 80, 90 136.0  -  174.0 51.52 5.0  PM 16K0F3E
BC 80, 90 136.0  -  174.0 51.52 5.0  PM 11K0F3E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 14K2F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 14K2F1E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 9K9F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 9K9F1E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 7K1F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 7K1F1E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 8K4F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 8K4F1E

Power is conducted. Output is at the antenna terminal of the device. For vehicle mounting theantenna used for this transmitter must be mounted at the center of the vehicle's roof and maximum antenna gain must not exceeding 2.2 dBi. For motorcycle mount the antenna(s) used for this transmitter must be installed using the mount kit described that provides a separation distance of at least 54 cm with a maximum antenna gain of 4.5 dBi and transmit power less than 25 W. This radio must operate in push-to-talk mode with a duty factor not exceeding 50%, must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting the exposure requirements and users must be provided with the training information.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application iSqikzm2WoNnBhWi1uJwsQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HARRIS CORPORATION
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States
  Date of Grant: 12/12/2006

Application Dated: 12/11/2006
 
Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OWDTR-0035-E
Name of Grantee:  HARRIS CORPORATION
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: M7100 VHF Mobile, 8-50W
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 80, 90 136.0  -  174.0 51.52 5.0  PM 16K0F3E
BC 80, 90 136.0  -  174.0 51.52 5.0  PM 11K0F3E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 14K2F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 14K2F1E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 9K9F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 9K9F1E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 7K1F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 7K1F1E
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 8K4F1D
BC 80, 90 136.0  -  174.0 51.52 2.0  PM 8K4F1E

Power is conducted. Output is at the antenna terminal of the device. For vehicle mounting theantenna used for this transmitter must be mounted at the center of the vehicle's roof and maximum antenna gain must not exceeding 2.2 dBi. For motorcycle mount the antenna(s) used for this transmitter must be installed using the mount kit described that provides a separation distance of at least 54 cm with a maximum antenna gain of 4.5 dBi and transmit power less than 25 W. This radio must operate in push-to-talk mode with a duty factor not exceeding 50%, must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting the exposure requirements and users must be provided with the training information.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application BJ5jKKN6pwSDAwpNZ+LrTA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/13/2013

Application Dated: 11/13/2013
HARRIS CORPORATION
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
 
Attention: William Pertner , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OWDTR-0035-E
Name of Grantee:  HARRIS CORPORATION
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: M7100 VHF Mobile, 8-50W
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC EF 22, 80 136.0  -  174.0 51.52 5.0  PM 16K0F3E
BC EF 22, 80, 90 136.0  -  174.0 51.52 5.0  PM 11K0F3E
BC EF 22, 80 136.0  -  174.0 51.52 2.0  PM 14K2F1D
BC EF 22, 80 136.0  -  174.0 51.52 2.0  PM 14K2F1E
BC EF 22, 80, 90 136.0  -  174.0 51.52 2.0  PM 9K90F1D
BC EF 22, 80, 90 136.0  -  174.0 51.52 2.0  PM 9K90F1E
BC EF 22, 80, 90 136.0  -  174.0 51.52 2.0  PM 7K10F1D
BC EF 22, 80, 90 136.0  -  174.0 51.52 2.0  PM 7K10F1E
BC EF 22, 80, 90 136.0  -  174.0 51.52 2.0  PM 8K40F1D
BC EF 22, 80, 90 136.0  -  174.0 51.52 2.0  PM 8K40F1E

Power is conducted. Output is at the antenna terminal of the device. For vehicle mounting the antenna used for this transmitter must be mounted at the center of the vehicle's roof and maximum antenna gain must not exceeding 2.2dBi. For motorcycle mount the antenna(s) used for this transmitter must be installed using the mount kit described that provides a separation distance of at least 54 cm with a maximum antenna gain of 4.5dBi and transmit power less than 25W. This radio must operate in push-to-talk mode with a duty factor not exceeding 50%, must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting the exposure requirements and users must be provided with the training information. This device contains functions that are not operational in U.S Territories except as noted in the filing. This filing is only applicable for US operations. This PC adds use of a mobile radio in fixed installations of control stations (desk top and wall mount versions) and base station test unit applications.

Class 2 Permissive Change on the M7100 50W Mobile Radio with regard to the addition of Part 22 in the VHF band.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application BJ5jKKN6pwSDAwpNZ+LrTA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HARRIS CORPORATION
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States
  Date of Grant: 11/13/2013

Application Dated: 11/13/2013
 
Attention: William Pertner , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OWDTR-0035-E
Name of Grantee:  HARRIS CORPORATION
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: M7100 VHF Mobile, 8-50W
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC EF 22, 80 136.0  -  174.0 51.52 5.0  PM 16K0F3E
BC EF 22, 80, 90 136.0  -  174.0 51.52 5.0  PM 11K0F3E
BC EF 22, 80 136.0  -  174.0 51.52 2.0  PM 14K2F1D
BC EF 22, 80 136.0  -  174.0 51.52 2.0  PM 14K2F1E
BC EF 22, 80, 90 136.0  -  174.0 51.52 2.0  PM 9K90F1D
BC EF 22, 80, 90 136.0  -  174.0 51.52 2.0  PM 9K90F1E
BC EF 22, 80, 90 136.0  -  174.0 51.52 2.0  PM 7K10F1D
BC EF 22, 80, 90 136.0  -  174.0 51.52 2.0  PM 7K10F1E
BC EF 22, 80, 90 136.0  -  174.0 51.52 2.0  PM 8K40F1D
BC EF 22, 80, 90 136.0  -  174.0 51.52 2.0  PM 8K40F1E

Power is conducted. Output is at the antenna terminal of the device. For vehicle mounting the antenna used for this transmitter must be mounted at the center of the vehicle's roof and maximum antenna gain must not exceeding 2.2dBi. For motorcycle mount the antenna(s) used for this transmitter must be installed using the mount kit described that provides a separation distance of at least 54 cm with a maximum antenna gain of 4.5dBi and transmit power less than 25W. This radio must operate in push-to-talk mode with a duty factor not exceeding 50%, must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting the exposure requirements and users must be provided with the training information. This device contains functions that are not operational in U.S Territories except as noted in the filing. This filing is only applicable for US operations. This PC adds use of a mobile radio in fixed installations of control stations (desk top and wall mount versions) and base station test unit applications.

Class 2 Permissive Change on the M7100 50W Mobile Radio with regard to the addition of Part 22 in the VHF band.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

Mail To: