FCC ID OWS-NIC711
Radio module for electric meter
by Itron, Inc
Grantee Code: OWS Product Code: NIC711
Latest application date: 2019-11-07
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.3-926.9 MHz | Class II permissive change or modification of presently authorized equipment | 2019-11-07 |
| 902.3-926.9 MHz | Class II permissive change or modification of presently authorized equipment | 2013-07-25 |
| 902.3-926.9 MHz | Original Equipment | 2012-06-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2012-10-01 | PDF 1.1 MB |
| External Photos | External Photos | 2013-07-25 | PDF 3.2 MB |
| External Photos | External Photos | 2012-10-01 | PDF 117.8 KB |
| ID Label | ID Label/Location Info | 2012-06-13 | PDF 403.2 KB |
| Test Setup Photos | Test Setup Photos | 2019-11-07 | PDF 589.2 KB |
| Test Setup Photos | Test Setup Photos | 2013-07-25 | PDF 4.8 MB |
| Test Set Up Photos | Test Setup Photos | 2012-10-01 | PDF 359.9 KB |
| Test Report | Test Report | 2019-11-07 | PDF 743.8 KB |
| Test Report | Test Report | 2013-07-25 | PDF 756.2 KB |
| Test Report | Test Report | 2012-06-13 | PDF 2.2 MB |
| FHSS Compliance attestation | Attestation Statements | 2012-06-13 | PDF 41.9 KB |
| Authorization Letter | Cover Letter(s) | 2019-11-07 | PDF 80.2 KB |
| C2PC request Letter | Cover Letter(s) | 2019-11-07 | PDF 258.4 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2019-11-07 | PDF 508.2 KB |
| C2PC cover | Cover Letter(s) | 2013-07-25 | PDF 117 KB |
| Long Conf | Cover Letter(s) | 2013-07-25 | PDF 119.8 KB |
| POA Letter | Cover Letter(s) | 2013-07-25 | PDF 1.2 MB |
| Agent Authorization | Cover Letter(s) | 2012-06-13 | PDF 1.2 MB |
| Confidentiaility request (Short Term) | Cover Letter(s) | 2012-06-13 | PDF 120 KB |
| Confidentiality Request | Cover Letter(s) | 2012-06-13 | PDF 120.5 KB |
| Modular Approval Request | Cover Letter(s) | 2012-06-13 | PDF 97.2 KB |
| Professional Installation Justification | Cover Letter(s) | 2012-06-13 | PDF 305.2 KB |
| RF Exposure Report (MPE) | RF Exposure Info | 2019-11-07 | PDF 124.5 KB |
| MPE Calculation | RF Exposure Info | 2012-06-13 | PDF 102.5 KB |
| BOM List Metadata only | Parts List/Tune Up Info | PDF 56.1 KB |
Application Information
| Application ID | o1AnjcLH1WWeaNNCGi1qMQ== |
|---|---|
| Final Action Date | 2019-11-07 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017775842 |
| Model | NIC711 |
| Frequency Range | 902.3-926.9 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Radio module for electric meter |
| Responsible Party | Asim Tirmizi, Regulatory Engineering Manager, Asim.Tirmizi@itron.com  , 669-770-4000 |
| Technical Contact | Gordon Hurst, MiCOM Labs Inc, gordon_hurst@micomlabs.com  , 925 462 0304 |
| Test Firm | Gordon Hurst, MiCOM Labs, gordon_hurst@micomlabs.com , 925-462-0304 |
| TCB Email | certification@micomlabs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change to replace the SPDT TR switch as described in this filing. Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. This device supports bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| o1AnjcLH1WWeaNNCGi1qMQ== | 2019-11-07 | Class II permissive change or modification of presently authorized equipment |
| O0KrkaK9GxQcHms9pvxs0A== | 2013-07-25 | Class II permissive change or modification of presently authorized equipment |
| qTDxQJMYPESAVW+TadRheQ== | 2012-06-13 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.3-926.9 MHz | 0.9040000 | 15C |
Grants
TCB Grant - Application qTDxQJMYPESAVW+TadRheQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/13/2012 Application Dated: 06/13/2012 |
| Silver Spring Networks |
| 575 Broadway Street |
| Redwood City, CA 94063 |
| Attention: Asim Tirmizi , Manager HWQA |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC711 |
| Name of Grantee: | Silver Spring Networks |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radio module for electric meter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 926.9 | 0.904 |
| Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. This device supports bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
EAS Grant - Application qTDxQJMYPESAVW+TadRheQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silver Spring Networks 575 Broadway Street Redwood City, CA 94063 United States |
Date of Grant: 06/13/2012 Application Dated: 06/13/2012 |
| Attention: Asim Tirmizi , Manager HWQA |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC711 |
| Name of Grantee: | Silver Spring Networks |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radio module for electric meter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 926.9 | 0.904 |
| Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. This device supports bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 11/07/2019 Application Dated: 11/07/2019 |
| Itron, Inc |
| 230 W. Tasman Dr. |
| San Jose, CA 95134 |
| Attention: Asim Tirmizi , Regulatory Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC711 |
| Name of Grantee: | Itron, Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radio module for electric meter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 926.9 | 0.904 |
| Class II permissive change to replace the SPDT TR switch as described in this filing. Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. This device supports bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
EAS Grant - Application o1AnjcLH1WWeaNNCGi1qMQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron, Inc 230 W. Tasman Dr. San Jose, CA 95134 United States |
Date of Grant: 11/07/2019 Application Dated: 11/07/2019 |
| Attention: Asim Tirmizi , Regulatory Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC711 |
| Name of Grantee: | Itron, Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radio module for electric meter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 926.9 | 0.904 |
| Class II permissive change to replace the SPDT TR switch as described in this filing. Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. This device supports bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/25/2013 Application Dated: 07/25/2013 |
| Silver Spring Networks |
| 575 Broadway Street |
| Redwood City, CA 94063 |
| Attention: Asim Tirmizi , Manager HWQA |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC711 |
| Name of Grantee: | Silver Spring Networks |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radio module for electric meter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 926.9 | 0.904 |
| Class II permissive change to use a different front-end module circuit as described in this filing. Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. This device supports bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and endusers must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
EAS Grant - Application O0KrkaK9GxQcHms9pvxs0A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silver Spring Networks 575 Broadway Street Redwood City, CA 94063 United States |
Date of Grant: 07/25/2013 Application Dated: 07/25/2013 |
| Attention: Asim Tirmizi , Manager HWQA |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC711 |
| Name of Grantee: | Silver Spring Networks |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radio module for electric meter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 926.9 | 0.904 |
| Class II permissive change to use a different front-end module circuit as described in this filing. Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. This device supports bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and endusers must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| Mail To: |