FCC ID OWS-NIC714
Radio module for electric meter
by Itron, Inc
Grantee Code: OWS Product Code: NIC714
Latest application date: 2019-11-20
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2405-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-11-20 |
| 902.3-926.9 MHz | Class II permissive change or modification of presently authorized equipment | 2019-11-20 |
| 902.3-926.9 MHz | Class II permissive change or modification of presently authorized equipment | 2013-09-18 |
| 902.3-926.9 MHz | Class II permissive change or modification of presently authorized equipment | 2013-08-12 |
| 2405-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-08-12 |
| 902.3-926.9 MHz | Original Equipment | 2012-06-15 |
| 2405-2480 MHz | Original Equipment | 2012-06-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2012-10-01 | PDF 1.1 MB |
| NDA to support internal photo confidentiaility | Attestation Statements | 2012-06-15 | PDF 310.8 KB |
| External Photos | External Photos | 2013-08-12 | PDF 143.9 KB |
| External Photo | External Photos | 2012-10-01 | PDF 117.8 KB |
| External Photos | External Photos | 2012-10-01 | PDF 117.8 KB |
| ID Label | ID Label/Location Info | 2012-06-15 | PDF 430.9 KB |
| ID Label and Location | ID Label/Location Info | 2012-06-15 | PDF 430.9 KB |
| Test Setup Photos | Test Setup Photos | 2019-11-20 | PDF 599.1 KB |
| Test Setup Photos | Test Setup Photos | 2013-09-18 | PDF 4.8 MB |
| Test setup photo | Test Setup Photos | 2013-08-12 | PDF 4.8 MB |
| Test Set Up | Test Setup Photos | 2012-10-01 | PDF 359.9 KB |
| Test set up photos | Test Setup Photos | 2012-10-01 | PDF 363.2 KB |
| Test Report | Test Report | 2019-11-20 | PDF 1.2 MB |
| C2PC Test Report | Test Report | 2013-09-18 | PDF 1.4 MB |
| Cond SPUR Test Report | Test Report | 2013-09-18 | PDF 245.4 KB |
| Test Report_DSS | Test Report | 2013-08-12 | PDF 771 KB |
| Test Report_DTS | Test Report | 2013-08-12 | PDF 1.5 MB |
| Test Report (DTS) | Test Report | 2012-06-15 | PDF 1 MB |
| test report (FHSS) | Test Report | 2012-06-15 | PDF 2.2 MB |
| test report -evaluation of simultaneous Tx | Test Report | 2012-06-15 | PDF 166.5 KB |
| FHSS Attestations | Cover Letter(s) | 2013-09-18 | PDF 41.9 KB |
| FHSS Attestation | Attestation Statements | 2012-06-15 | PDF 41.9 KB |
| Authorization Letter | Cover Letter(s) | 2019-11-20 | PDF 80.2 KB |
| C2PC request Letter | Cover Letter(s) | 2019-11-20 | PDF 258.5 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2019-11-20 | PDF 510.5 KB |
| AGENT Letter | Cover Letter(s) | 2013-09-18 | PDF 1.2 MB |
| C2PC Letter | Cover Letter(s) | 2013-09-18 | PDF 116.5 KB |
| Perm conf | Cover Letter(s) | 2013-09-18 | PDF 119.5 KB |
| AGENT | Cover Letter(s) | 2013-08-12 | PDF 1.2 MB |
| Letter C2PC | Cover Letter(s) | 2013-08-12 | PDF 117.7 KB |
| Long Conf | Cover Letter(s) | 2013-08-12 | PDF 119.8 KB |
| Agent Authorization | Cover Letter(s) | 2012-06-15 | PDF 1.2 MB |
| Agent authorization | Cover Letter(s) | 2012-06-15 | PDF 1.2 MB |
| Confidentiality Request | Cover Letter(s) | 2012-06-15 | PDF 120.5 KB |
| Confidentiality Request (Short term) | Cover Letter(s) | 2012-06-15 | PDF 120 KB |
| Confidentiality Request (short term) | Cover Letter(s) | 2012-06-15 | PDF 120 KB |
| Modular approval | Cover Letter(s) | 2012-06-15 | PDF 100 KB |
| Modular aproval request | Cover Letter(s) | 2012-06-15 | PDF 100 KB |
| RF Exposure Report (MPE) | RF Exposure Info | 2019-11-20 | PDF 124.8 KB |
| MPE | RF Exposure Info | 2013-09-18 | PDF 37 KB |
| RF Exposure | RF Exposure Info | 2013-09-18 | PDF 98.3 KB |
| MPE Calculation (2.4GHz DTS) | RF Exposure Info | 2012-06-15 | PDF 30.8 KB |
| MPE Calculation (900MHz FHSS) | RF Exposure Info | 2012-06-15 | PDF 30.8 KB |
| MPE Calculation (external antenna - both Tx) | RF Exposure Info | 2012-06-15 | PDF 31.4 KB |
| MPE Calculation (external antenna - both Tx) | RF Exposure Info | 2012-06-15 | PDF 31.2 KB |
| MPE Calculation (internal antenna - both Tx) | RF Exposure Info | 2012-06-15 | PDF 31.3 KB |
| MPE Calculation (internal antenna - both Tx) | RF Exposure Info | 2012-06-15 | PDF 31.2 KB |
| BOM List Metadata only | Parts List/Tune Up Info | PDF 56.1 KB |
Application Information
| Application ID | pSq07EwJtC1CsXQXKvHukw== |
|---|---|
| Final Action Date | 2019-11-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017775842 |
| Model | NIC714 |
| Frequency Range | 2405-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Radio module for electric meter |
| Responsible Party | Asim Tirmizi, Regulatory Engineering Manager, Asim.Tirmizi@itron.com  , 669-770-4000 |
| Technical Contact | Gordon Hurst, MiCOM Labs Inc., gordon_hurst@micomlabs.com  , 9254620304 |
| Test Firm | Gordon Hurst, MiCOM Labs, gordon_hurst@micomlabs.com , 925-462-0304 |
| TCB Email | certification@micomlabs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change to replace the SPDT TR switch as described in this filing. Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| pSq07EwJtC1CsXQXKvHukw== | 2019-11-20 | Class II permissive change or modification of presently authorized equipment |
| naQYQMhzWhIlVT8sq4DvIg== | 2019-11-20 | Class II permissive change or modification of presently authorized equipment |
| xJf46aJwfTVpiBGPPHReKg== | 2013-09-18 | Class II permissive change or modification of presently authorized equipment |
| SblXQ8jXItaRONgH8tBZaQ== | 2013-08-12 | Class II permissive change or modification of presently authorized equipment |
| NwRBa5Ygt8uMv7dbECvYoQ== | 2013-08-12 | Class II permissive change or modification of presently authorized equipment |
| oVEhfy1CCbktPGN4/X9sPQ== | 2012-06-15 | Original Equipment |
| LwGwm8LNc7mv9kYWafCcmg== | 2012-06-15 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application xJf46aJwfTVpiBGPPHReKg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/18/2013 Application Dated: 09/18/2013 |
| Silver Spring Networks |
| 575 Broadway Street |
| Redwood City, CA 94063 |
| Attention: Asim Tirmizi , Manager HWQA |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC714 |
| Name of Grantee: | Silver Spring Networks |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radio module for electric meter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.3 - 926.9 | 0.904 | ||
| CC | 15C | 2400.8 - 2472.0 | 0.436 |
| Class II permissive change to add a 2.4GHz frequency band by software as described in this filing. Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. This device supports bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and endusers must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application xJf46aJwfTVpiBGPPHReKg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silver Spring Networks 575 Broadway Street Redwood City, CA 94063 United States |
Date of Grant: 09/18/2013 Application Dated: 09/18/2013 |
| Attention: Asim Tirmizi , Manager HWQA |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC714 |
| Name of Grantee: | Silver Spring Networks |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radio module for electric meter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.3 - 926.9 | 0.904 | ||
| CC | 15C | 2400.8 - 2472.0 | 0.436 |
| Class II permissive change to add a 2.4GHz frequency band by software as described in this filing. Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. This device supports bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and endusers must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/12/2013 Application Dated: 08/12/2013 |
| Silver Spring Networks |
| 575 Broadway Street |
| Redwood City, CA 94063 |
| Attention: Asim Tirmizi , Manager HWQA |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC714 |
| Name of Grantee: | Silver Spring Networks |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radio module for electric meter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.3 - 926.9 | 0.904 |
| Class II permissive change to use a different front-end module circuit as described in this filing. Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. This device supports bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and endusers must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application SblXQ8jXItaRONgH8tBZaQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silver Spring Networks 575 Broadway Street Redwood City, CA 94063 United States |
Date of Grant: 08/12/2013 Application Dated: 08/12/2013 |
| Attention: Asim Tirmizi , Manager HWQA |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC714 |
| Name of Grantee: | Silver Spring Networks |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radio module for electric meter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.3 - 926.9 | 0.904 |
| Class II permissive change to use a different front-end module circuit as described in this filing. Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. This device supports bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and endusers must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 11/20/2019 Application Dated: 11/20/2019 |
| Itron, Inc |
| 230 W. Tasman Dr. |
| San Jose, CA 95134 |
| Attention: Asim Tirmizi , Regulatory Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC714 |
| Name of Grantee: | Itron, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio module for electric meter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2405.0 - 2480.0 | 0.207 |
| Class II permissive change to replace the SPDT TR switch as described in this filing. Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application pSq07EwJtC1CsXQXKvHukw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron, Inc 230 W. Tasman Dr. San Jose, CA 95134 United States |
Date of Grant: 11/20/2019 Application Dated: 11/20/2019 |
| Attention: Asim Tirmizi , Regulatory Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC714 |
| Name of Grantee: | Itron, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio module for electric meter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2405.0 - 2480.0 | 0.207 |
| Class II permissive change to replace the SPDT TR switch as described in this filing. Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/15/2012 Application Dated: 06/15/2012 |
| Silver Spring Networks |
| 575 Broadway Street |
| Redwood City, CA 94063 |
| Attention: Asim Tirmizi , Manager HWQA |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC714 |
| Name of Grantee: | Silver Spring Networks |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radio module for electric meter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.3 - 926.9 | 0.904 |
| Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. This device supports bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application oVEhfy1CCbktPGN4/X9sPQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silver Spring Networks 575 Broadway Street Redwood City, CA 94063 United States |
Date of Grant: 06/15/2012 Application Dated: 06/15/2012 |
| Attention: Asim Tirmizi , Manager HWQA |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC714 |
| Name of Grantee: | Silver Spring Networks |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radio module for electric meter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.3 - 926.9 | 0.904 |
| Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. This device supports bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/12/2013 Application Dated: 08/12/2013 |
| Silver Spring Networks |
| 575 Broadway Street |
| Redwood City, CA 94063 |
| Attention: Asim Tirmizi , Manager HWQA |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC714 |
| Name of Grantee: | Silver Spring Networks |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio module for electric meter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2405.0 - 2480.0 | 0.207 |
| Class II permissive change to use a different front-end module circuit as described in this filing. Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and endusers must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application NwRBa5Ygt8uMv7dbECvYoQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silver Spring Networks 575 Broadway Street Redwood City, CA 94063 United States |
Date of Grant: 08/12/2013 Application Dated: 08/12/2013 |
| Attention: Asim Tirmizi , Manager HWQA |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC714 |
| Name of Grantee: | Silver Spring Networks |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio module for electric meter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2405.0 - 2480.0 | 0.207 |
| Class II permissive change to use a different front-end module circuit as described in this filing. Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and endusers must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 11/20/2019 Application Dated: 11/20/2019 |
| Itron, Inc |
| 230 W. Tasman Dr. |
| San Jose, CA 95134 |
| Attention: Asim Tirmizi , Regulatory Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC714 |
| Name of Grantee: | Itron, Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radio module for electric meter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.3 - 926.9 | 0.904 | ||
| CC | 15C | 2400.8 - 2472.0 | 0.436 |
| Class II permissive change to replace the SPDT TR switch as described in this filing. Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. This device supports bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application naQYQMhzWhIlVT8sq4DvIg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron, Inc 230 W. Tasman Dr. San Jose, CA 95134 United States |
Date of Grant: 11/20/2019 Application Dated: 11/20/2019 |
| Attention: Asim Tirmizi , Regulatory Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC714 |
| Name of Grantee: | Itron, Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radio module for electric meter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.3 - 926.9 | 0.904 | ||
| CC | 15C | 2400.8 - 2472.0 | 0.436 |
| Class II permissive change to replace the SPDT TR switch as described in this filing. Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. This device supports bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/15/2012 Application Dated: 06/15/2012 |
| Silver Spring Networks |
| 575 Broadway Street |
| Redwood City, CA 94063 |
| Attention: Asim Tirmizi , Manager HWQA |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC714 |
| Name of Grantee: | Silver Spring Networks |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio module for electric meter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2405.0 - 2480.0 | 0.207 |
| Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application LwGwm8LNc7mv9kYWafCcmg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silver Spring Networks 575 Broadway Street Redwood City, CA 94063 United States |
Date of Grant: 06/15/2012 Application Dated: 06/15/2012 |
| Attention: Asim Tirmizi , Manager HWQA |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OWS-NIC714 |
| Name of Grantee: | Silver Spring Networks |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio module for electric meter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2405.0 - 2480.0 | 0.207 |
| Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |