FCC ID OXGAL67
Show Home App Laser RGB 3D Hologram Projector
by Willis Electric Co., Ltd.
Grantee Code: OXG Product Code: AL67
Latest application date: 2018-06-07
FCC ID Device Details
| FCC ID | OXGAL67 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | OXG |
| Product Code | AL67 |
| Applicant Business | Willis Electric Co., Ltd. 🇹🇼 |
| Related Domains |  willis.com.tw |
| Equipment Class | Show Home App Laser RGB 3D Hologram Projector |
| Test Firm | Precise Testing & Certification Co., LTD. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-06-07 |
| 2402-2480 MHz | Original Equipment | 2018-04-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2018-04-25 | PDF 727 KB |
| Internal Photos | Internal Photos | 2018-06-07 | PDF 717.9 KB |
| Internal photos-change Detail | Internal Photos | 2018-06-07 | PDF 174.7 KB |
| Internal Photos | Internal Photos | 2018-04-25 | PDF 614 KB |
| External Photos | External Photos | 2018-04-25 | PDF 455.6 KB |
| Label Location Description | ID Label/Location Info | 2018-04-25 | PDF 126.1 KB |
| RF Test set-up Photos | Test Setup Photos | 2018-04-25 | PDF 236.2 KB |
| RF Test Report | Test Report | 2018-06-07 | PDF 2 MB |
| RF Test Report | Test Report | 2018-04-25 | PDF 2.2 MB |
| Authorization Letter | Cover Letter(s) | 2018-06-07 | PDF 20.2 KB |
| Class II Permissive change letter | Cover Letter(s) | 2018-06-07 | PDF 18.7 KB |
| LTC Letter | Cover Letter(s) | 2018-06-07 | PDF 19 KB |
| Authorization Letter | Cover Letter(s) | 2018-04-25 | PDF 20.2 KB |
| LTC Letter | Cover Letter(s) | 2018-04-25 | PDF 19.1 KB |
| RF Exposure Report | RF Exposure Info | 2018-04-25 | PDF 40.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 40.8 KB | |
| Schematics Metadata only | Schematics | PDF 56.1 KB | |
| Schematics Metadata only | Schematics | PDF 66.2 KB | |
| Operational Description Metadata only | Operational Description | PDF 23.7 KB |
Application Information
| Application ID | wXxg1/o4jkzV3gB8qXl+/w== |
|---|---|
| Final Action Date | 2018-06-07 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0021934195 |
| Model | AL67 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Show Home App Laser RGB 3D Hologram Projector |
| Responsible Party | Grace Dai, Safety Engineer, Grace.dai@willis.com.tw , 886-03-5385155 |
| Test Firm | Chris Du, Precise Testing & Certification Co., LTD., chris.du@ptc-testing.com  , +86-769-38808222 |
| TCB Email | tcb@siemic.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC Approval: 1. Modify the driving mode of laser diode, constant voltage changed to constant voltage + constant current. Pcb layout changed. 2. Add a heat sink to reduce the internal temperature Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20CM form all persons and must not be co-located or operation in conjunction with any other antenna or transmitter. Except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| wXxg1/o4jkzV3gB8qXl+/w== | 2018-06-07 | Class II permissive change or modification of presently authorized equipment |
| hmzWo0kd0DZ3zUJEuZRNlw== | 2018-04-25 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0004600 | 15C |
Grants
TCB Grant - Application wXxg1/o4jkzV3gB8qXl+/w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/07/2018 Application Dated: 06/07/2018 |
| Willis Electric Co., Ltd. |
| No.504-1, Chung-Hua Road, Sec.4 |
| Hsin Chu, 300 Taiwan |
| Attention: Grace Dai , Safety Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OXGAL67 |
| Name of Grantee: | Willis Electric Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Show Home App Laser RGB 3D Hologram Projector |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00046 |
| C2PC Approval: 1. Modify the driving mode of laser diode, constant voltage changed to constant voltage + constant current. Pcb layout changed. 2. Add a heat sink to reduce the internal temperature Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20CM form all persons and must not be co-located or operation in conjunction with any other antenna or transmitter. Except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance |
EAS Grant - Application wXxg1/o4jkzV3gB8qXl+/w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Willis Electric Co., Ltd. No.504-1, Chung-Hua Road, Sec.4 Hsin Chu, 300 Taiwan |
Date of Grant: 06/07/2018 Application Dated: 06/07/2018 |
| Attention: Grace Dai , Safety Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OXGAL67 |
| Name of Grantee: | Willis Electric Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Show Home App Laser RGB 3D Hologram Projector |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00046 |
| C2PC Approval: 1. Modify the driving mode of laser diode, constant voltage changed to constant voltage + constant current. Pcb layout changed. 2. Add a heat sink to reduce the internal temperature Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20CM form all persons and must not be co-located or operation in conjunction with any other antenna or transmitter. Except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 04/25/2018 Application Dated: 04/25/2018 |
| Willis Electric Co., Ltd. |
| No.504-1, Chung-Hua Road, Sec.4 |
| Hsin Chu, 300 Taiwan |
| Attention: Grace Dai , Safety Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OXGAL67 |
| Name of Grantee: | Willis Electric Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Show Home App Laser RGB 3D Hologram Projector |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00046 |
| Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. |
EAS Grant - Application hmzWo0kd0DZ3zUJEuZRNlw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Willis Electric Co., Ltd. No.504-1, Chung-Hua Road, Sec.4 Hsin Chu, 300 Taiwan |
Date of Grant: 04/25/2018 Application Dated: 04/25/2018 |
| Attention: Grace Dai , Safety Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OXGAL67 |
| Name of Grantee: | Willis Electric Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Show Home App Laser RGB 3D Hologram Projector |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00046 |
| Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. |
| Mail To: |