FCC ID OZFDC1310
C&I; COMMUNICATIONS MODULE
by Tantalus Systems Corp
Grantee Code: OZF Product Code: DC1310
Latest application date: 2014-02-26
FCC ID Device Details
| FCC ID | OZFDC1310 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | OZF |
| Product Code | DC1310 |
| Applicant Business | Tantalus Systems Corp 🇨🇦 |
| Related Domains |  tantalus.com |
| Equipment Class | C&I; COMMUNICATIONS MODULE |
| Test Firm | Quality Auditing Institute Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.17-927.83 MHz | Class II permissive change or modification of presently authorized equipment | 2014-02-26 |
| 902.17-927.83 MHz | Class II permissive change or modification of presently authorized equipment | 2013-09-27 |
| 902.17-927.83 MHz | Original Equipment | 2013-06-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2013-06-26 | PDF 225.8 KB |
| Label | ID Label/Location Info | 2013-06-26 | PDF 25.8 KB |
| Label Location | ID Label/Location Info | 2013-06-26 | PDF 207.5 KB |
| Test Setup Photos | Test Setup Photos | 2013-06-26 | PDF 229.5 KB |
| Test Report | Test Report | 2014-02-26 | PDF 778.9 KB |
| Test Report | Test Report | 2013-09-27 | PDF 809.5 KB |
| Test Report | Test Report | 2013-06-26 | PDF 1.6 MB |
| Cover Letter C2PC | Cover Letter(s) | 2014-02-26 | PDF 67.8 KB |
| Cover Letter RF Exp | Cover Letter(s) | 2014-02-26 | PDF 54.2 KB |
| Cover Letter | Cover Letter(s) | 2013-09-27 | PDF 68.6 KB |
| Confidential Letter | Cover Letter(s) | 2013-06-26 | PDF 56.9 KB |
| Cover Letter | Cover Letter(s) | 2013-06-26 | PDF 54.5 KB |
| NDA | Cover Letter(s) | 2013-06-26 | PDF 46.3 KB |
| RF Exposure | RF Exposure Info | 2013-09-27 | PDF 54.1 KB |
| RF Exposure | RF Exposure Info | 2013-06-26 | PDF 128.1 KB |
Application Information
| Application ID | 7zd3VM8YWOmOUc9PMsCvqQ== |
|---|---|
| Final Action Date | 2014-02-26 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007474851 |
| Model | DC1310 |
| Frequency Range | 902.17-927.83 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | C&I; COMMUNICATIONS MODULE |
| Responsible Party | Mark Fairburn, RF Design Engineer, mfairburn@tantalus.com , 604 299-0458 |
| Test Firm | Lawrence Gibson, Quality Auditing Institute Ltd., lgibson@qai.org  , 604-527-8378 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: This Class II Change incorporates updated firmware for a higher data rate throughput.. When operating in the high speed data rate mode, the operating frequency is: 902.28 - 927.72 MHz. (Date of Grant: 09/27/2013) Class II Permissive Change: This Class II Permissive change is because the embedded firmware has been changed to allow communication to a third party Part 15 FCC certified device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 7zd3VM8YWOmOUc9PMsCvqQ== | 2014-02-26 | Class II permissive change or modification of presently authorized equipment |
| zcwVKpKiMBU8KVl2XWip8g== | 2013-09-27 | Class II permissive change or modification of presently authorized equipment |
| W4446pMboykYhWjEchxrkw== | 2013-06-26 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.17-927.83 MHz | 0.7910000 | 15C |
Grants
TCB Grant - Application zcwVKpKiMBU8KVl2XWip8g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/27/2013 Application Dated: 09/27/2013 |
| Tantalus Systems Corp |
| 301-3480 Gilmore Way |
| Burnaby, BC, V5G 4Y1 Canada |
| Attention: Mark Fairburn , RF Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OZFDC1310 |
| Name of Grantee: | Tantalus Systems Corp |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | PP-1310 C & I SMART METER MODULE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.17 - 927.83 | 0.791 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: This Class II Change incorporates updated firmware for a higher data rate throughput.. When operating in the high speed data rate mode, the operating frequency is: 902.28 - 927.72 MHz. |
EAS Grant - Application zcwVKpKiMBU8KVl2XWip8g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tantalus Systems Corp 301-3480 Gilmore Way Burnaby, BC, V5G 4Y1 Canada |
Date of Grant: 09/27/2013 Application Dated: 09/27/2013 |
| Attention: Mark Fairburn , RF Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OZFDC1310 |
| Name of Grantee: | Tantalus Systems Corp |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | PP-1310 C & I SMART METER MODULE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.17 - 927.83 | 0.791 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: This Class II Change incorporates updated firmware for a higher data rate throughput.. When operating in the high speed data rate mode, the operating frequency is: 902.28 - 927.72 MHz. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 06/26/2013 Application Dated: 06/26/2013 |
| Tantalus Systems Corp |
| 301-3480 Gilmore Way |
| Burnaby, BC, V5G 4Y1 Canada |
| Attention: Mark Fairburn , RF Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OZFDC1310 |
| Name of Grantee: | Tantalus Systems Corp |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | C & I COMMUNICATIONS MODULE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.17 - 927.83 | 0.791 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application W4446pMboykYhWjEchxrkw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tantalus Systems Corp 301-3480 Gilmore Way Burnaby, BC, V5G 4Y1 Canada |
Date of Grant: 06/26/2013 Application Dated: 06/26/2013 |
| Attention: Mark Fairburn , RF Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OZFDC1310 |
| Name of Grantee: | Tantalus Systems Corp |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | C & I COMMUNICATIONS MODULE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.17 - 927.83 | 0.791 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 02/26/2014 Application Dated: 02/26/2014 |
| Tantalus Systems Corp |
| 301-3480 Gilmore Way |
| Burnaby, BC, V5G 4Y1 Canada |
| Attention: Mark Fairburn , RF Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OZFDC1310 |
| Name of Grantee: | Tantalus Systems Corp |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | C&I COMMUNICATIONS MODULE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.17 - 927.83 | 0.791 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: This Class II Change incorporates updated firmware for a higher data rate throughput.. When operating in the high speed data rate mode, the operating frequency is: 902.28 - 927.72 MHz. (Date of Grant: 09/27/2013) Class II Permissive Change: This Class II Permissive change is because the embedded firmware has been changed to allow communication to a third party Part 15 FCC certified device. |
EAS Grant - Application 7zd3VM8YWOmOUc9PMsCvqQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tantalus Systems Corp 301-3480 Gilmore Way Burnaby, BC, V5G 4Y1 Canada |
Date of Grant: 02/26/2014 Application Dated: 02/26/2014 |
| Attention: Mark Fairburn , RF Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OZFDC1310 |
| Name of Grantee: | Tantalus Systems Corp |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | C&I COMMUNICATIONS MODULE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.17 - 927.83 | 0.791 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: This Class II Change incorporates updated firmware for a higher data rate throughput.. When operating in the high speed data rate mode, the operating frequency is: 902.28 - 927.72 MHz. (Date of Grant: 09/27/2013) Class II Permissive Change: This Class II Permissive change is because the embedded firmware has been changed to allow communication to a third party Part 15 FCC certified device. |
| Mail To: |