FCC ID OZFDC1901
RF Repeater
by Tantalus Systems Corp
Grantee Code: OZF Product Code: DC1901
Latest application date: 2014-03-11
FCC ID Device Details
| FCC ID | OZFDC1901 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | OZF |
| Product Code | DC1901 |
| Applicant Business | Tantalus Systems Corp 🇨🇦 |
| Related Domains |  tantalus.com |
| Equipment Class | RF Repeater |
| Test Firm | Quality Auditing Institute Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.17-927.83 MHz | Class II permissive change or modification of presently authorized equipment | 2014-03-11 |
| 902.17-927.83 MHz | Class II permissive change or modification of presently authorized equipment | 2013-10-17 |
| 902.17-927.83 MHz | Original Equipment | 2013-02-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2013-02-20 | PDF 264.8 KB |
| Label | ID Label/Location Info | 2013-02-20 | PDF 104.4 KB |
| Label Location | ID Label/Location Info | 2013-02-20 | PDF 196.3 KB |
| Test Setup Photos | Test Setup Photos | 2013-02-20 | PDF 383.6 KB |
| TEST REPORT | Test Report | 2014-03-11 | PDF 779.1 KB |
| Test Report | Test Report | 2013-10-17 | PDF 797.2 KB |
| Test Report | Test Report | 2013-02-20 | PDF 2.3 MB |
| COVER LETTER | Cover Letter(s) | 2014-03-11 | PDF 67.1 KB |
| RF EXP COVER LETTER | Cover Letter(s) | 2014-03-11 | PDF 54.3 KB |
| C2PC Cover Letter | Cover Letter(s) | 2013-10-17 | PDF 68.1 KB |
| Confidential Letter | Cover Letter(s) | 2013-02-20 | PDF 57.1 KB |
| Cover Letter | Cover Letter(s) | 2013-02-20 | PDF 55 KB |
| NDA | Cover Letter(s) | 2013-02-20 | PDF 46.3 KB |
| RF Exposure Info | RF Exposure Info | 2013-10-17 | PDF 54.1 KB |
| RF Exposure | RF Exposure Info | 2013-02-20 | PDF 96.6 KB |
Application Information
| Application ID | Hx0cjWni6Jr/Kax6P8zkJA== |
|---|---|
| Final Action Date | 2014-03-11 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007474851 |
| Model | DC1901 |
| Frequency Range | 902.17-927.83 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RF Repeater |
| Responsible Party | Mark Fairburn, RF Design Engineer, mfairburn@tantalus.com , 604 299-0458 |
| Test Firm | Lawrence Gibson, Quality Auditing Institute Ltd., lgibson@qai.org  , 604-527-8378 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date: 02/20/2013) CLASS II CHANGE: This Class II Change incorporates updated firmware for higher data rate throughput. When operating in the high speed data rate mode, the operating frequency is: 902.28 – 927.72 MHz. (Date of Grant: 10/17/2013) Class II Permissive Change: This Class II Permissive Change is to allow communication to a third party Part 15 FCC certified device. The modulation bandwidth and channel spacing has been changed to accomplish this. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Hx0cjWni6Jr/Kax6P8zkJA== | 2014-03-11 | Class II permissive change or modification of presently authorized equipment |
| FB/ss1qOryBjJd6RXFuECA== | 2013-10-17 | Class II permissive change or modification of presently authorized equipment |
| 0aK0S8O9wRWrEe5JdtpO4A== | 2013-02-20 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.17-927.83 MHz | 0.8910000 | 15C |
Grants
TCB Grant - Application Hx0cjWni6Jr/Kax6P8zkJA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/11/2014 Application Dated: 03/11/2014 |
| Tantalus Systems Corp |
| 200-3555 Gilmore Way |
| Burnaby, BC, V5G 0B3 Canada |
| Attention: Mark Fairburn , RF Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OZFDC1901 |
| Name of Grantee: | Tantalus Systems Corp |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF Repeater |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.17 - 927.83 | 0.891 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date: 02/20/2013) CLASS II CHANGE: This Class II Change incorporates updated firmware for higher data rate throughput. When operating in the high speed data rate mode, the operating frequency is: 902.28 – 927.72 MHz. (Date of Grant: 10/17/2013) Class II Permissive Change: This Class II Permissive Change is to allow communication to a third party Part 15 FCC certified device. The modulation bandwidth and channel spacing has been changed to accomplish this. |
EAS Grant - Application Hx0cjWni6Jr/Kax6P8zkJA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tantalus Systems Corp 200-3555 Gilmore Way Burnaby, BC, V5G 0B3 Canada |
Date of Grant: 03/11/2014 Application Dated: 03/11/2014 |
| Attention: Mark Fairburn , RF Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OZFDC1901 |
| Name of Grantee: | Tantalus Systems Corp |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF Repeater |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.17 - 927.83 | 0.891 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date: 02/20/2013) CLASS II CHANGE: This Class II Change incorporates updated firmware for higher data rate throughput. When operating in the high speed data rate mode, the operating frequency is: 902.28 – 927.72 MHz. (Date of Grant: 10/17/2013) Class II Permissive Change: This Class II Permissive Change is to allow communication to a third party Part 15 FCC certified device. The modulation bandwidth and channel spacing has been changed to accomplish this. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 10/17/2013 Application Dated: 10/17/2013 |
| Tantalus Systems Corp |
| 301-3480 Gilmore Way |
| Burnaby, BC, V5G 4Y1 Canada |
| Attention: Mark Fairburn , RF Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OZFDC1901 |
| Name of Grantee: | Tantalus Systems Corp |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | TR-1901 RF Repeater |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.17 - 927.83 | 0.891 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date: 02/20/2013) CLASS II CHANGE: This Class II Change incorporates updated firmware for higher data rate throughput. When operating in the high speed data rate mode, the operating frequency is: 902.28 – 927.72 MHz. |
EAS Grant - Application FB/ss1qOryBjJd6RXFuECA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tantalus Systems Corp 301-3480 Gilmore Way Burnaby, BC, V5G 4Y1 Canada |
Date of Grant: 10/17/2013 Application Dated: 10/17/2013 |
| Attention: Mark Fairburn , RF Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OZFDC1901 |
| Name of Grantee: | Tantalus Systems Corp |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | TR-1901 RF Repeater |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.17 - 927.83 | 0.891 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date: 02/20/2013) CLASS II CHANGE: This Class II Change incorporates updated firmware for higher data rate throughput. When operating in the high speed data rate mode, the operating frequency is: 902.28 – 927.72 MHz. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 02/20/2013 Application Dated: 02/20/2013 |
| Tantalus Systems Corp |
| 301-3480 Gilmore Way |
| Burnaby, BC, V5G 4Y1 Canada |
| Attention: Mark Fairburn , RF Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OZFDC1901 |
| Name of Grantee: | Tantalus Systems Corp |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | C&I COMMUNICATIONS MODULE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.17 - 927.83 | 0.891 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 0aK0S8O9wRWrEe5JdtpO4A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tantalus Systems Corp 301-3480 Gilmore Way Burnaby, BC, V5G 4Y1 Canada |
Date of Grant: 02/20/2013 Application Dated: 02/20/2013 |
| Attention: Mark Fairburn , RF Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OZFDC1901 |
| Name of Grantee: | Tantalus Systems Corp |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | C&I COMMUNICATIONS MODULE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.17 - 927.83 | 0.891 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |