FCC ID OZFN2202
220MHz WAN Network Controller
by Tantalus Systems Corp
Grantee Code: OZF Product Code: N2202
Latest application date: 2017-01-12
FCC ID Device Details
| FCC ID | OZFN2202 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | OZF |
| Product Code | N2202 |
| Applicant Business | Tantalus Systems Corp 🇨🇦 |
| Related Domains |  tantalus.com |
| Equipment Class | 220MHz WAN Network Controller |
| Test Firm | QAI LABORATORIES LTD. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 220.003-220.998 MHz | Class II permissive change or modification of presently authorized equipment | 2017-01-12 |
| 220.003-220.998 MHz | Original Equipment | 2006-04-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| users manual | Users Manual | 2006-04-25 | PDF 235.3 KB |
| internal photos | Internal Photos | 2006-04-25 | PDF 1.8 MB |
| external photos | External Photos | 2006-04-25 | PDF 292.9 KB |
| label location | ID Label/Location Info | 2006-04-25 | PDF 118.3 KB |
| label sample | ID Label/Location Info | 2006-04-25 | PDF 378.8 KB |
| Test Setup Photos | Test Setup Photos | 2017-01-12 | PDF 171.3 KB |
| test setup photos | Test Setup Photos | 2006-04-25 | PDF 378.1 KB |
| Test Report | Test Report | 2017-01-12 | PDF 894 KB |
| test report 1 | Test Report | 2006-04-25 | PDF 354.8 KB |
| test report 2 | Test Report | 2006-04-25 | PDF 1.3 MB |
| Class II Permissive Change Letter | Cover Letter(s) | 2017-01-12 | PDF 115 KB |
| request for confidentiality | Cover Letter(s) | 2006-04-25 | PDF 66 KB |
| Parts List | Parts List/Tune Up Info | 2017-01-12 | PDF 175.9 KB |
| rf exposure | RF Exposure Info | 2006-04-25 | PDF 84 KB |
| tune up info | Parts List/Tune Up Info | 2006-04-25 | PDF 50.3 KB |
Application Information
| Application ID | lYJ6aA4zHFSF7PIPSNwqQA== |
|---|---|
| Final Action Date | 2017-01-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007474851 |
| Model | N2202 |
| Frequency Range | 220.003-220.998 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | 220MHz WAN Network Controller |
| Responsible Party | Mark Fairburn, RF Design Engineer, mfairburn@tantalus.com , 604 299-0458 |
| Test Firm | Parminder Singh, QAI LABORATORIES LTD., psingh@qai.org  , 604-527-8378 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz) |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. The antenna(s) used for this transmitter must be installed to provide the separation distance of at least 8m from all persons and must not exceed a gain of 7.5dBd. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of 1.1307(b)(3), for satisfying RF exposure compliance.” |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| lYJ6aA4zHFSF7PIPSNwqQA== | 2017-01-12 | Class II permissive change or modification of presently authorized equipment |
| gfHwl6D6pWi0ytJAwRdVsg== | 2006-04-25 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application lYJ6aA4zHFSF7PIPSNwqQA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 01/12/2017 Application Dated: 01/12/2017 |
| Tantalus Systems Corp |
| 200-3555 Gilmore Way |
| Burnaby, BC, V5G 0B3 Canada |
| Attention: Mark Fairburn , RF Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OZFN2202 |
| Name of Grantee: | Tantalus Systems Corp |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | 220MHz WAN Network Controller |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 220.0025 - 220.9975 | 51.3 | 0.1 PM | 3K20F1D |
| Power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. The antenna(s) used for this transmitter must be installed to provide the separation distance of at least 8m from all persons and must not exceed a gain of 7.5dBd. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of 1.1307(b)(3), for satisfying RF exposure compliance.” |
EAS Grant - Application lYJ6aA4zHFSF7PIPSNwqQA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tantalus Systems Corp 200-3555 Gilmore Way Burnaby, BC, V5G 0B3 Canada |
Date of Grant: 01/12/2017 Application Dated: 01/12/2017 |
| Attention: Mark Fairburn , RF Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OZFN2202 |
| Name of Grantee: | Tantalus Systems Corp |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | 220MHz WAN Network Controller |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 220.0025 - 220.9975 | 51.3 | 0.1 PM | 3K20F1D |
| Power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. The antenna(s) used for this transmitter must be installed to provide the separation distance of at least 8m from all persons and must not exceed a gain of 7.5dBd. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of 1.1307(b)(3), for satisfying RF exposure compliance.” |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 04/25/2006 Application Dated: 04/25/2006 |
| Tantalus Systems Corp |
| 200-3555 Gilmore Way |
| Burnaby, BC, V5G 0B3 Canada |
| Attention: Mark Fairburn , RF Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OZFN2202 |
| Name of Grantee: | Tantalus Systems Corp |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | NETWORK CONTROLLER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 220.0025 - 220.9975 | 52.0 | 0.1 PM | 3K20F1D | |
| 90 | 220.0025 - 220.9975 | 19.0 | 0.1 PM | 3K20F1D |
| Power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. The antenna(s) used for this transmitter must be installed to provide the separation distance of at least 8m from all persons and must not exceed a gain of 7.5dBd. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of 1.1307(b)(3), for satisfying RF exposure compliance.” |
EAS Grant - Application gfHwl6D6pWi0ytJAwRdVsg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tantalus Systems Corp 200-3555 Gilmore Way Burnaby, BC, V5G 0B3 Canada |
Date of Grant: 04/25/2006 Application Dated: 04/25/2006 |
| Attention: Mark Fairburn , RF Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OZFN2202 |
| Name of Grantee: | Tantalus Systems Corp |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | NETWORK CONTROLLER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 220.0025 - 220.9975 | 52.0 | 0.1 PM | 3K20F1D | |
| 90 | 220.0025 - 220.9975 | 19.0 | 0.1 PM | 3K20F1D |
| Power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. The antenna(s) used for this transmitter must be installed to provide the separation distance of at least 8m from all persons and must not exceed a gain of 7.5dBd. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of 1.1307(b)(3), for satisfying RF exposure compliance.” |
| Mail To: |