FCC ID P27LC4RT
Ninja LTE module
by Sercomm Corporation
Grantee Code: P27 Product Code: LC4RT
Latest application date: 2016-12-09
FCC ID Device Details
| FCC ID | P27LC4RT |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | P27 |
| Product Code | LC4RT |
| Applicant Business | Sercomm Corporation 🇹🇼 |
| Related Domains |  sercomm.com |
| Equipment Class | Ninja LTE module |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 1852.5-1912.5 MHz | Class II permissive change or modification of presently authorized equipment | 2016-12-09 |
| 1852.5-1912.5 MHz | Original Equipment | 2016-07-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual.pdf | Users Manual | 2016-08-28 | PDF 2.4 MB |
| Internal Photos.pdf | Internal Photos | 2016-08-28 | PDF 287.4 KB |
| External Photos.pdf | External Photos | 2016-08-28 | PDF 235.4 KB |
| Label Location.pdf | ID Label/Location Info | 2016-07-29 | PDF 76.1 KB |
| Label Sample.pdf | ID Label/Location Info | 2016-07-29 | PDF 77.1 KB |
| Test Setup Photos | Test Setup Photos | 2016-12-09 | PDF 517.4 KB |
| Test Set Up Photos.pdf | Test Setup Photos | 2016-08-28 | PDF 315 KB |
| Test Report rev | Test Report | 2016-12-09 | PDF 735.2 KB |
| Test Report (Part 24).pdf | Test Report | 2016-07-29 | PDF 744 KB |
| Test Report (Part 27).pdf | Test Report | 2016-07-29 | PDF 1.1 MB |
| Cover Letter - Agent Authorization | Cover Letter(s) | 2016-12-09 | PDF 329.9 KB |
| Cover Letter - Description of Change | Cover Letter(s) | 2016-12-09 | PDF 331.1 KB |
| Confidentiality Request (long term).pdf | Cover Letter(s) | 2016-07-29 | PDF 209.5 KB |
| Confidentiality Request (short term).pdf | Cover Letter(s) | 2016-07-29 | PDF 209.2 KB |
| Cover Letter (Agent Authorization).pdf | Cover Letter(s) | 2016-07-29 | PDF 243.6 KB |
| Cover Letter (Modular Approval Request).pdf | Cover Letter(s) | 2016-07-29 | PDF 113.9 KB |
| RF Exposure Information (MPE) rev | RF Exposure Info | 2016-12-09 | PDF 57.5 KB |
| RF Exposure Info (MPE).pdf | RF Exposure Info | 2016-07-29 | PDF 57.2 KB |
| Block Diagram.pdf Metadata only | Block Diagram | PDF 1.3 MB | |
| Schematics.pdf Metadata only | Schematics | PDF 604.4 KB | |
| Operational Description.pdf Metadata only | Operational Description | PDF 108.3 KB | |
| Parts List.pdf Metadata only | Parts List/Tune Up Info | PDF 480.6 KB | |
| Tune-Up Procedure.pdf Metadata only | Parts List/Tune Up Info | PDF 244.3 KB |
Application Information
| Application ID | 47sVRc7v2FVhU9JcBimX/g== |
|---|---|
| Final Action Date | 2016-12-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0015548027 |
| Model | LC4RT |
| Frequency Range | 1852.5-1912.5 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | Ninja LTE module |
| Responsible Party | Nick Wu, Engineer, Nick_wu@SERCOMM.COM , 886-2-2655-3988 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com  , +886-(0)3-260-0884 |
| TCB Email | tcb@us.bureauveritas.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change as described in this filing. Output power listed EIRP for Part 24/27. Values listed for LTE operations are for the highest power and the widest bandwidth for each band and modulation. Single modular approval for mobile RF exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installations only. OEM integrators and end users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.The maximum antenna gain is 1.7dBi in 1852.5-1912.5 MHz, 2.7dBi in 2506.8-2560.0 MHz & 2628.8-2680.0Mhz. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 47sVRc7v2FVhU9JcBimX/g== | 2016-12-09 | Class II permissive change or modification of presently authorized equipment |
| RahAT/1x6o+PGjYjK7jSfQ== | 2016-07-29 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules |
|---|---|---|---|---|
| 1852.5-1912.5 MHz | 0.618 | 2.5ppm | 4M50G7D | 24E |
| 1852.5-1912.5 MHz | 0.594 | 2.5ppm | 4M56W7D | 24E |
| 2506.8-2560 MHz | 0.187 | 2.5ppm | 18M0G7D | 27 |
| 2506.8-2560 MHz | 0.183 | 2.5ppm | 18M0W7D | 27 |
| 2510-2560 MHz | 0.187 | 2.5ppm | 18M0G7D | 27 |
| 2510-2560 MHz | 0.183 | 2.5ppm | 18M0W7D | 27 |
| 2628.8-2680 MHz | 0.228 | 2.5ppm | 18M1G7D | 27 |
| 2628.8-2680 MHz | 0.223 | 2.5ppm | 18M1W7D | 27 |
| 2630-2680 MHz | 0.228 | 2.5ppm | 18M1G7D | 27 |
| 2630-2680 MHz | 0.223 | 2.5ppm | 18M1W7D | 27 |
Grants
TCB Grant - Application RahAT/1x6o+PGjYjK7jSfQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 07/29/2016 Application Dated: 07/29/2016 |
| Sercomm Corporation |
| 8F, No. 3-1, YuanQu St, NanKang |
| Taipei, 115 Taiwan |
| Attention: Nick Wu , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P27LC4RT |
| Name of Grantee: | Sercomm Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Ninja LTE module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1852.5 - 1912.5 | 0.618 | 2.5 PM | 4M50G7D | |
| 24E | 1852.5 - 1912.5 | 0.594 | 2.5 PM | 4M56W7D | |
| 27 | 2510.0 - 2560.0 | 0.187 | 2.5 PM | 18M0G7D | |
| 27 | 2510.0 - 2560.0 | 0.183 | 2.5 PM | 18M0W7D | |
| 27 | 2630.0 - 2680.0 | 0.228 | 2.5 PM | 18M1G7D | |
| 27 | 2630.0 - 2680.0 | 0.223 | 2.5 PM | 18M1W7D |
| Output power listed EIRP for Part 24/27. Values listed for LTE operations are for the highest power and the widest bandwidth for each band and modulation. Single modular approval for mobile RF exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installations only. OEM integrators and end users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The maximum antenna gain is 1.7dBi in 1852.5-1912.5 MHz, 2.7dBi in 2510.0-2560.0 MHz & 2630.0-2680.0Mhz. |
EAS Grant - Application RahAT/1x6o+PGjYjK7jSfQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sercomm Corporation 8F, No. 3-1, YuanQu St, NanKang Taipei, 115 Taiwan |
Date of Grant: 07/29/2016 Application Dated: 07/29/2016 |
| Attention: Nick Wu , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P27LC4RT |
| Name of Grantee: | Sercomm Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Ninja LTE module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1852.5 - 1912.5 | 0.618 | 2.5 PM | 4M50G7D | |
| 24E | 1852.5 - 1912.5 | 0.594 | 2.5 PM | 4M56W7D | |
| 27 | 2510.0 - 2560.0 | 0.187 | 2.5 PM | 18M0G7D | |
| 27 | 2510.0 - 2560.0 | 0.183 | 2.5 PM | 18M0W7D | |
| 27 | 2630.0 - 2680.0 | 0.228 | 2.5 PM | 18M1G7D | |
| 27 | 2630.0 - 2680.0 | 0.223 | 2.5 PM | 18M1W7D |
| Output power listed EIRP for Part 24/27. Values listed for LTE operations are for the highest power and the widest bandwidth for each band and modulation. Single modular approval for mobile RF exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installations only. OEM integrators and end users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The maximum antenna gain is 1.7dBi in 1852.5-1912.5 MHz, 2.7dBi in 2510.0-2560.0 MHz & 2630.0-2680.0Mhz. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 12/09/2016 Application Dated: 12/07/2016 |
| Sercomm Corporation |
| 8F, No. 3-1, YuanQu St, NanKang |
| Taipei, 115 Taiwan |
| Attention: Nick Wu , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P27LC4RT |
| Name of Grantee: | Sercomm Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Ninja LTE module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1852.5 - 1912.5 | 0.618 | 2.5 PM | 4M50G7D | |
| 24E | 1852.5 - 1912.5 | 0.594 | 2.5 PM | 4M56W7D | |
| 27 | 2506.8 - 2560.0 | 0.187 | 2.5 PM | 18M0G7D | |
| 27 | 2506.8 - 2560.0 | 0.183 | 2.5 PM | 18M0W7D | |
| 27 | 2628.8 - 2680.0 | 0.228 | 2.5 PM | 18M1G7D | |
| 27 | 2628.8 - 2680.0 | 0.223 | 2.5 PM | 18M1W7D |
| Class II Permissive Change as described in this filing. Output power listed EIRP for Part 24/27. Values listed for LTE operations are for the highest power and the widest bandwidth for each band and modulation. Single modular approval for mobile RF exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installations only. OEM integrators and end users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.The maximum antenna gain is 1.7dBi in 1852.5-1912.5 MHz, 2.7dBi in 2506.8-2560.0 MHz & 2628.8-2680.0Mhz. |
EAS Grant - Application 47sVRc7v2FVhU9JcBimX/g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sercomm Corporation 8F, No. 3-1, YuanQu St, NanKang Taipei, 115 Taiwan |
Date of Grant: 12/09/2016 Application Dated: 12/07/2016 |
| Attention: Nick Wu , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P27LC4RT |
| Name of Grantee: | Sercomm Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Ninja LTE module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1852.5 - 1912.5 | 0.618 | 2.5 PM | 4M50G7D | |
| 24E | 1852.5 - 1912.5 | 0.594 | 2.5 PM | 4M56W7D | |
| 27 | 2506.8 - 2560.0 | 0.187 | 2.5 PM | 18M0G7D | |
| 27 | 2506.8 - 2560.0 | 0.183 | 2.5 PM | 18M0W7D | |
| 27 | 2628.8 - 2680.0 | 0.228 | 2.5 PM | 18M1G7D | |
| 27 | 2628.8 - 2680.0 | 0.223 | 2.5 PM | 18M1W7D |
| Class II Permissive Change as described in this filing. Output power listed EIRP for Part 24/27. Values listed for LTE operations are for the highest power and the widest bandwidth for each band and modulation. Single modular approval for mobile RF exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installations only. OEM integrators and end users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.The maximum antenna gain is 1.7dBi in 1852.5-1912.5 MHz, 2.7dBi in 2506.8-2560.0 MHz & 2628.8-2680.0Mhz. |
| Mail To: |