FCC ID P27RC8522

Wireless Network FHD Camera

by Sercomm Corporation

Grantee Code: P27   Product Code: RC8522
Latest application date: 2016-07-06

Device Images

FCC ID Device Details

FCC IDP27RC8522
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeP27
Product CodeRC8522
Applicant BusinessSercomm Corporation 🇹🇼
Related Domains sercomm.com icertifi.com.tw
Equipment ClassWireless Network FHD Camera
Test FirmInternational Certification Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2016-07-06
5180-5240 MHzOriginal Equipment2016-07-06

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2016-07-06PDF 466.5 KB
Internal PhotosInternal Photos2016-07-06PDF 2.4 MB
External PhotosExternal Photos2016-07-06PDF 673.1 KB
ID Label/Location InfoID Label/Location Info2016-07-06PDF 1.3 MB
Test Setup PhotosTest Setup Photos2016-07-06PDF 539.7 KB
Test ReportTest Report2016-07-06PDF 1.4 MB
Test ReportTest Report2016-07-06PDF 3.4 MB
Ad Hoc DeclarationCover Letter(s)2016-07-06PDF 46.2 KB
ConfidentialityCover Letter(s)2016-07-06PDF 58.7 KB
DOCCover Letter(s)2016-07-06PDF 33 KB
POACover Letter(s)2016-07-06PDF 61.3 KB
MPERF Exposure Info2016-07-06PDF 200.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 13.2 KB
Schematics Metadata onlySchematicsPDF 289 KB
Operational Description Metadata onlyOperational DescriptionPDF 214.8 KB
Software security for UNII Metadata onlyOperational DescriptionPDF 100.8 KB

Application Information

Application IDTgotCgkqrEGfd4yg85f65w==
Final Action Date2016-07-06
Application PurposeOriginal Equipment
Applicant FRN0015548027
ModelRC8522
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless Network FHD Camera
Responsible PartyNick Wu, Engineer, Nick_wu@SERCOMM.COM , 886-2-2655-3988
AgentGary Gary Gary, International Certification Corp., GaryChang@icertifi.com.tw , 886-3-271-8628
Technical ContactGary Chang, International Certification Corp., GaryChang@icertifi.com.tw , 886-3-271-8628
Non-Technical ContactWendy, International Certification Corp., wendyLiao@icertifi.com.tw , 886-3-271-8629
Test FirmFu-Cheng Chuang, International Certification Corp., Jeff@icertifi.com.tw , 886-3-271-8666
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.

Applications

Application IDDatePurpose
TgotCgkqrEGfd4yg85f65w==2016-07-06Original Equipment
2zy32bCN6YhKX80ddQy5og==2016-07-06Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.609000015CCC, MO
5180-5240 MHz0.13415E38, CC, MO
5745-5825 MHz0.12615E38, CC, MO

Grants

TCB Grant - Application TgotCgkqrEGfd4yg85f65w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 07/06/2016

Application Dated: 07/06/2016
Sercomm Corporation
8F, No. 3-1, YuanQu St, NanKang
Taipei, 115
Taiwan
 
Attention: Nick Wu , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P27RC8522
Name of Grantee:  Sercomm Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Network FHD Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.609  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application TgotCgkqrEGfd4yg85f65w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sercomm Corporation
8F, No. 3-1, YuanQu St, NanKang
Taipei, 115
Taiwan
  Date of Grant: 07/06/2016

Application Dated: 07/06/2016
 
Attention: Nick Wu , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P27RC8522
Name of Grantee:  Sercomm Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Network FHD Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.609  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 2zy32bCN6YhKX80ddQy5og==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 07/06/2016

Application Dated: 07/06/2016
Sercomm Corporation
8F, No. 3-1, YuanQu St, NanKang
Taipei, 115
Taiwan
 
Attention: Nick Wu , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P27RC8522
Name of Grantee:  Sercomm Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Network FHD Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.134  
38 CC MO 15E 5745.0  -  5825.0 0.126  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40/80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 2zy32bCN6YhKX80ddQy5og==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sercomm Corporation
8F, No. 3-1, YuanQu St, NanKang
Taipei, 115
Taiwan
  Date of Grant: 07/06/2016

Application Dated: 07/06/2016
 
Attention: Nick Wu , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P27RC8522
Name of Grantee:  Sercomm Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Network FHD Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.134  
38 CC MO 15E 5745.0  -  5825.0 0.126  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40/80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: