FCC ID P2SNTGR900G

UTILITY METER DATA TRANSMITTER

by Neptune Technology Group Inc.

Grantee Code: P2S   Product Code: NTGR900G
Latest application date: 2007-02-28

FCC ID Device Details

FCC IDP2SNTGR900G
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeP2S
Product CodeNTGR900G
Applicant BusinessNeptune Technology Group Inc. 🇺🇸
Related Domains neptunetg.com
Equipment ClassUTILITY METER DATA TRANSMITTER
Test FirmAdvanced Compliance Solutions, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
911-920 MHzClass II permissive change or modification of presently authorized equipment2007-02-28
911-920 MHzOriginal Equipment2006-04-12

Exhibits

DocumentTypeAvailableFile
USERS MANUALUsers Manual2006-04-12PDF 1.2 MB
INTERNAL PHOTOSInternal Photos2006-04-12PDF 655.9 KB
EXTERNAL PHOTOSExternal Photos2006-04-12PDF 401.2 KB
LABEL SAMPLE AND LOCATIONID Label/Location Info2006-04-12PDF 202.6 KB
test setup photosTest Setup Photos2007-02-28PDF 416.4 KB
TEST SET UP PHOTOSTest Setup Photos2006-04-12PDF 527.9 KB
test reportTest Report2007-02-28PDF 196.2 KB
TEST REPORTTest Report2006-04-12PDF 178.5 KB
confidentiality letterCover Letter(s)2007-02-28PDF 274.5 KB
cover letterCover Letter(s)2007-02-28PDF 17.8 KB
CONFIDENTIALITY REQUESTCover Letter(s)2006-04-12PDF 77.4 KB
COVER LETTERCover Letter(s)2006-04-12PDF 29.1 KB
RF EXPOSURERF Exposure Info2006-04-12PDF 29.8 KB
BLOCK DIAGRAM Metadata onlyBlock DiagramPDF 263.3 KB
SCHEMATICS Metadata onlySchematicsPDF 1.5 MB
THEORY OF OPERATION Metadata onlyOperational DescriptionPDF 46.2 KB
PARTS LIST Metadata onlyParts List/Tune Up InfoPDF 24 KB

Application Information

Application IDzEZkgq2rAGkl7Q69lVvVmw==
Final Action Date2007-02-28
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0005079827
ModelNTGR900G
Frequency Range911-920 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionUTILITY METER DATA TRANSMITTER
Responsible PartyDamon Pattom, Principal Engimeer, dapatton@neptunetg.com , 3342837303
Test FirmSam Wismer, Advanced Compliance Solutions, Inc., swismer@acstestlab.com , 770-831-8048
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Listed is ERP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
zEZkgq2rAGkl7Q69lVvVmw==2007-02-28Class II permissive change or modification of presently authorized equipment
dD2o4VKrH6o9aBU2epkmRA==2006-04-12Original Equipment

Equipment Authorization

FrequencyOutputRules
911-920 MHz0.067000015C

Grants

TCB Grant - Application zEZkgq2rAGkl7Q69lVvVmw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 02/28/2007

Application Dated: 02/27/2007
Neptune Technology Group Inc.
1600 Alabama Highway 229
Tallassee, AL 36078
 
Attention: Damon Pattom , Principal Engimeer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P2SNTGR900G
Name of Grantee:  Neptune Technology Group Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: UTILITY METER DATA TRANSMITTER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 911.0  -  920.0 0.067  

Power Listed is ERP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application zEZkgq2rAGkl7Q69lVvVmw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Neptune Technology Group Inc.
1600 Alabama Highway 229
Tallassee, AL 36078
United States
  Date of Grant: 02/28/2007

Application Dated: 02/27/2007
 
Attention: Damon Pattom , Principal Engimeer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P2SNTGR900G
Name of Grantee:  Neptune Technology Group Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: UTILITY METER DATA TRANSMITTER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 911.0  -  920.0 0.067  

Power Listed is ERP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To:


EA797833

TCB Grant - Application dD2o4VKrH6o9aBU2epkmRA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/12/2006

Application Dated: 04/12/2006
Neptune Technology Group Inc.
1600 Alabama Highway 229
Tallassee, AL 36078
 
Attention: Damon Patton , Principal Engimeer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P2SNTGR900G
Name of Grantee:  Neptune Technology Group Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: UTILIY METER DATA TRANSMITTER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 911.0  -  920.0 0.067  

Power Listed Is EIRP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application dD2o4VKrH6o9aBU2epkmRA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Neptune Technology Group Inc.
1600 Alabama Highway 229
Tallassee, AL 36078
United States
  Date of Grant: 04/12/2006

Application Dated: 04/12/2006
 
Attention: Damon Patton , Principal Engimeer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P2SNTGR900G
Name of Grantee:  Neptune Technology Group Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: UTILIY METER DATA TRANSMITTER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 911.0  -  920.0 0.067  

Power Listed Is EIRP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: