FCC ID P2SNTR900GM
R900GM
by Neptune Technology Group Inc.
Grantee Code: P2S Product Code: NTR900GM
Latest application date: 2009-04-07
FCC ID Device Details
| FCC ID | P2SNTR900GM |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | P2S |
| Product Code | NTR900GM |
| Applicant Business | Neptune Technology Group Inc. 🇺🇸 |
| Related Domains | |
| Equipment Class | R900GM |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 911-920 MHz | Class II permissive change or modification of presently authorized equipment | 2009-04-07 |
| 911-920 MHz | Original Equipment | 2008-07-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| EXTERNAL PHOTOS | External Photos | 2008-07-16 | PDF 18.2 KB |
| LABEL INFORMATION | ID Label/Location Info | 2008-07-16 | PDF 257.9 KB |
| Test Setup Photos | Test Setup Photos | 2009-04-07 | PDF 109 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2008-07-16 | PDF 1,020.7 KB |
| Test Report | Test Report | 2009-04-07 | PDF 74.2 KB |
| Revised Test Report | Test Report | 2008-07-16 | PDF 265.6 KB |
| FCC Agency Agreement | Cover Letter(s) | 2009-04-07 | PDF 34 KB |
| FCC Cover Letter | Cover Letter(s) | 2009-04-07 | PDF 17.4 KB |
| AGENCY AGREEMENT | Cover Letter(s) | 2008-07-16 | PDF 248.9 KB |
| CONFIDENTIAL LETTER | Cover Letter(s) | 2008-07-16 | PDF 63.2 KB |
| COVER LETTER | Cover Letter(s) | 2008-07-16 | PDF 17.6 KB |
| MODULAR APPROVAL LETTER | Cover Letter(s) | 2008-07-16 | PDF 47.3 KB |
| Request to Supercede | Cover Letter(s) | 2008-07-16 | PDF 17.6 KB |
| RF EXPOSURE | RF Exposure Info | 2008-07-16 | PDF 30.5 KB |
Application Information
| Application ID | nTEMwalLA62Mki+1LKMjkA== |
|---|---|
| Final Action Date | 2009-04-07 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005079827 |
| Model | NTR900GM |
| Frequency Range | 911-920 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | R900GM |
| Responsible Party | Damon Pattom, Principal Engimeer, dapatton@neptunetg.com |
| Agent | Kirby Kirby Kirby, Advanced Compliance Solutions, Inc., kmunroe@acstestlab.com |
| Test Firm | Sam Wismer, Advanced Compliance Solutions, Inc., swismer@acstestlab.com |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval: Power listed is conducted. This module is approved for use when installed in the following models only: R900G Endpoint for America Meter Co., R900G Endpoint for Sensus Meter Co., R900G Endpoint for Actaris Meter Co., R900G Endpoint for Commercial & Industrial meters. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with specific operating instructions for satisfying RF exposure compliance requirements. Class II Change adds an additional host model, R900G Endpoint for National/Lancaster. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| nTEMwalLA62Mki+1LKMjkA== | 2009-04-07 | Class II permissive change or modification of presently authorized equipment |
| wsj4engfkQ0fT+Y/zuo93A== | 2008-07-16 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 911-920 MHz | 0.4160000 | 15C |
Grants
TCB Grant - Application wsj4engfkQ0fT+Y/zuo93A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 07/16/2008 Application Dated: 07/15/2008 |
| Neptune Technology Group Inc. |
| 1600 Alabama Highway 229 |
| Tallassee, AL 36078 |
| Attention: Damon Pattom , Principal Engimeer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P2SNTR900GM |
| Name of Grantee: | Neptune Technology Group Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | R900GM |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 911.0 - 920.0 | 0.416 |
| Modular Approval: Power listed is conducted. This module is approved for use when installed in the following models only: R900G Endpoint for America Meter Co., R900G Endpoint for Sensus Meter Co., R900G Endpoint for Actaris Meter Co., R900G Endpoint for Commercial & Industrial meters. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
EAS Grant - Application wsj4engfkQ0fT+Y/zuo93A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Neptune Technology Group Inc. 1600 Alabama Highway 229 Tallassee, AL 36078 United States |
Date of Grant: 07/16/2008 Application Dated: 07/15/2008 |
| Attention: Damon Pattom , Principal Engimeer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P2SNTR900GM |
| Name of Grantee: | Neptune Technology Group Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | R900GM |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 911.0 - 920.0 | 0.416 |
| Modular Approval: Power listed is conducted. This module is approved for use when installed in the following models only: R900G Endpoint for America Meter Co., R900G Endpoint for Sensus Meter Co., R900G Endpoint for Actaris Meter Co., R900G Endpoint for Commercial & Industrial meters. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 04/07/2009 Application Dated: 04/07/2009 |
| Neptune Technology Group Inc. |
| 1600 Alabama Highway 229 |
| Tallassee, AL 36078 |
| Attention: Damon Pattom , Principal Engimeer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P2SNTR900GM |
| Name of Grantee: | Neptune Technology Group Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | R900GM |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 911.0 - 920.0 | 0.416 |
| Modular Approval: Power listed is conducted. This module is approved for use when installed in the following models only: R900G Endpoint for America Meter Co., R900G Endpoint for Sensus Meter Co., R900G Endpoint for Actaris Meter Co., R900G Endpoint for Commercial & Industrial meters. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with specific operating instructions for satisfying RF exposure compliance requirements. Class II Change adds an additional host model, R900G Endpoint for National/Lancaster. |
EAS Grant - Application nTEMwalLA62Mki+1LKMjkA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Neptune Technology Group Inc. 1600 Alabama Highway 229 Tallassee, AL 36078 United States |
Date of Grant: 04/07/2009 Application Dated: 04/07/2009 |
| Attention: Damon Pattom , Principal Engimeer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P2SNTR900GM |
| Name of Grantee: | Neptune Technology Group Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | R900GM |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 911.0 - 920.0 | 0.416 |
| Modular Approval: Power listed is conducted. This module is approved for use when installed in the following models only: R900G Endpoint for America Meter Co., R900G Endpoint for Sensus Meter Co., R900G Endpoint for Actaris Meter Co., R900G Endpoint for Commercial & Industrial meters. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with specific operating instructions for satisfying RF exposure compliance requirements. Class II Change adds an additional host model, R900G Endpoint for National/Lancaster. |
| Mail To: |