FCC ID P3TCBDAS-1A1S

P3T-CBDAS-1A1S, P3T CBDAS1A1S, P3TCBDAS-1A1S, P3TCBDAS-IAIS, P3TCBDA5-1A15

Fiplex Communications Inc ESMR REPEATER CBDAS-1A1S

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: P3TCBDAS-1A1S is P3T. The remaining characters of the FCC ID, CBDAS-1A1S, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: ESMR REPEATER

Application: ESMR REPEATER
Equipment Class: AMP - Amplifier
Short Link: fcc.id/P3TCBDAS-1A1S
Sources: FCC.gov | FCC.report
Registered By: Fiplex Communications Inc - P3T (United States)

App #	Purpose	Date	Unique ID
1	Original Equipment	2012-10-23	Dxf6J+P9bMTXkdPgZT0D0g==

Operating Frequencies

Colombia Homologation [?]: P3TCBDAS-1A1S

Device operates within approved frequencies overlapping with the following cellular bands: CDMA 10,Sec 800 MHz DOWN |

Frequency Range	Power Output	Tolerance	Emission Designator	Rule Parts	Line Entry
806-824 MHz	100 mW	Amp	GXW	9	1
806-824 MHz	100 mW	Amp	F1E	9	2
806-824 MHz	100 mW	Amp	F1D	9	3
806-824 MHz	100 mW	Amp	F3E	9	4
851-869 MHz	100 mW	Amp	GXW	9	5
851-869 MHz	100 mW	Amp	F1E	9	6
851-869 MHz	100 mW	Amp	F1D	9	7
851-869 MHz	100 mW	Amp	F3E	9	8

Exhibits

Document	Type	Submitted Available
Users Manual	Users Manual Adobe Acrobat PDF (695 kB)	2012-10-23 2012-10-23
Tuneup Procedure	Parts List/Tune Up Info Adobe Acrobat PDF (7 kB)	2012-10-23 2012-10-23
Operational Description	Operational Description Adobe Acrobat PDF (184 kB)	2012-10-23 2012-10-23
MPE Letter	Cover Letter(s) Adobe Acrobat PDF (62 kB)	2012-10-23 2012-10-23
Internal Photos	Internal Photos Adobe Acrobat PDF (2427 kB)	2012-10-23 2012-10-23
Label	ID Label/Location Info Adobe Acrobat PDF (37 kB)	2012-10-23 2012-10-23
Label Location	ID Label/Location Info Adobe Acrobat PDF (586 kB)	2012-10-23 2012-10-23
External Photos	External Photos Adobe Acrobat PDF (3344 kB)	2012-10-23 2012-10-23
Confidential Letter	Cover Letter(s) Adobe Acrobat PDF (36 kB)	2012-10-23 2012-10-23
Block Diagram	Block Diagram Adobe Acrobat PDF (423 kB)	2012-10-23 2012-10-23
Authorization Letter	Cover Letter(s) Adobe Acrobat PDF (36 kB)	2012-10-23 2012-10-23
Test Report	Test Report Adobe Acrobat PDF (604 kB)	2012-10-23 2012-10-23
Test Setup Photos Uplink	Test Setup Photos Adobe Acrobat PDF (956 kB)	2012-10-23 2012-10-23
Test Setup Photos Downlink	Test Setup Photos Adobe Acrobat PDF (865 kB)	2012-10-23 2012-10-23
Parts List	Parts List/Tune Up Info Adobe Acrobat PDF (49 kB)	2012-10-23
Schematics	Schematics Adobe Acrobat PDF (147 kB)	2012-10-23

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	Fiplex Communications Inc
FCC Registration Number (FRN):	0005657499
Alphanumeric FCC ID:	P3TCBDAS1A1S
Unique Application Identifier:	Dxf6J+P9bMTXkdPgZT0D0g==
Line one:	7331 NW 54th Street
City:	Miami
State:	Florida
Country:	United States
Zip Code:	33166

TCB Information

TCB Application Email Address:	tei@timcoengr.com
TCB Scope:	B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID

Grantee Code:	P3T
Product Code:	CBDAS-1A1S

Person at the applicant's address to receive grant or for contact

Name:	Ricardo de Goycoechea
Title:	General Manager

Telephone Number:

305-884-8991

Extension:

Fax Number:	305-884-4041
Email:	fiplex@signalgrp.com

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: No

If so, specify the short-term confidentiality release date (MM/DD/YYYY format):
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: AMP - Amplifier
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	ESMR REPEATER

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Does not apply

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: Timco Engineering, Inc.

First Name: Sid

Last Name: Sanders

Telephone Number:

352-472-5500

Extension:

Fax Number: 352 472 2030

E-mail: tei@timcoengr.com

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power listed is conducted. The antenna installation and operating configurations of this signal booster, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical exclusion requirements of §2.1091. The antenna(s) used with this signal booster must be installed to provide a separation distance of at least 7.4 cm for an inside antenna and 17 cm for a fixed outside antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antenna gain less cable loss must not exceed 13 dBi for an inside antenna and 13 dBi for a fixed outside antenna. Users and installers must be provided with antenna installation instructions and operating conditions for satisfying RF exposure compliance.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Mario R. de Aranzeta

Title of authorized signature: Engineer

Grants

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669

Date of Grant: 10/23/2012

Application Dated: 10/23/2012

Fiplex Communications Inc

7331 NW 54th Street

Miami, FL 33166

Attention: Ricardo de Goycoechea , General Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	P3TCBDAS-1A1S

Name of Grantee:	Fiplex Communications Inc

Equipment Class:	Amplifier
Notes:	ESMR REPEATER

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0 - 824.0	0.1	Amp	GXW
	90	806.0 - 824.0	0.1	Amp	F1E
	90	806.0 - 824.0	0.1	Amp	F1D
	90	806.0 - 824.0	0.1	Amp	F3E
	90	851.0 - 869.0	0.1	Amp	GXW
	90	851.0 - 869.0	0.1	Amp	F1E
	90	851.0 - 869.0	0.1	Amp	F1D
	90	851.0 - 869.0	0.1	Amp	F3E

Power listed is conducted. The antenna installation and operating configurations of this signal booster, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical exclusion requirements of §2.1091. The antenna(s) used with this signal booster must be installed to provide a separation distance of at least 7.4 cm for an inside antenna and 17 cm for a fixed outside antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antenna gain less cable loss must not exceed 13 dBi for an inside antenna and 13 dBi for a fixed outside antenna. Users and installers must be provided with antenna installation instructions and operating conditions for satisfying RF exposure compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Fiplex Communications Inc
7331 NW 54th Street
Miami, FL 33166
United States