FCC ID P3YSPOTCELL0009
Spotcell 163 IDEN DU / 167 PTR DU
by Spotwave Wireless Ltd.
Grantee Code: P3Y Product Code: SPOTCELL0009
Latest application date: 2006-11-29
FCC ID Device Details
| FCC ID | P3YSPOTCELL0009 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | P3Y |
| Product Code | SPOTCELL0009 |
| Applicant Business | Spotwave Wireless Ltd. 🇨🇦 |
| Related Domains |  spotwave.com |
| Equipment Class | Spotcell 163 IDEN DU / 167 PTR DU |
| Test Firm | Nemko Canada Inc. (Ottawa) |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 806-821 MHz | Class II permissive change or modification of presently authorized equipment | 2006-11-29 |
| 806-821 MHz | Original Equipment | 2004-02-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2006-11-29 | PDF 1.5 MB |
| Coverage Extension Install Guide for Spotcell 163 | Users Manual | 2004-02-05 | PDF 396.5 KB |
| SpotCell 163 User Manual | Users Manual | 2004-02-05 | PDF 1.6 MB |
| SpotCell QuickStart | Users Manual | 2004-02-05 | PDF 313.3 KB |
| Internal Views | Internal Photos | 2004-02-05 | PDF 1.4 MB |
| External Views | External Photos | 2004-02-05 | PDF 522.7 KB |
| Label 1 | ID Label/Location Info | 2006-11-29 | PDF 71.7 KB |
| Label 2 | ID Label/Location Info | 2006-11-29 | PDF 71.7 KB |
| DU Label | ID Label/Location Info | 2004-02-05 | PDF 31.1 KB |
| Label Location | ID Label/Location Info | 2004-02-05 | PDF 26.4 KB |
| Test Setup Photos | Test Setup Photos | 2004-02-05 | PDF 160.1 KB |
| Tset Report | Test Report | 2006-11-29 | PDF 401 KB |
| Test Report | Test Report | 2004-02-05 | PDF 252.6 KB |
| Authority | Cover Letter(s) | 2006-11-29 | PDF 17.5 KB |
| Class II Permissive Changes | Cover Letter(s) | 2006-11-29 | PDF 19.4 KB |
| Confidentiality request | Cover Letter(s) | 2004-02-05 | PDF 73.3 KB |
| RF Exposure Information SpotCell 163 DU | RF Exposure Info | 2004-02-05 | PDF 153.2 KB |
| Specifications of DownLink Amp | Parts List/Tune Up Info | 2004-02-05 | PDF 91.8 KB |
| Specifications of UpLink Final Stage AMP | Parts List/Tune Up Info | 2004-02-05 | PDF 468.4 KB |
| Specifications of VCO | Parts List/Tune Up Info | 2004-02-05 | PDF 159.4 KB |
| Block Diagram Metadata only | Block Diagram | PDF 141.2 KB | |
| DU Schematics Metadata only | Schematics | PDF 147 KB | |
| Operational description Metadata only | Operational Description | PDF 76.9 KB | |
| BOM 1 of 2 Metadata only | Parts List/Tune Up Info | PDF 33.8 KB | |
| BOM 2 of 2 Metadata only | Parts List/Tune Up Info | PDF 29.8 KB |
Application Information
| Application ID | NXe7kngsljXCDlEyyVsjtw== |
|---|---|
| Final Action Date | 2006-11-29 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005792155 |
| Model | SPOTCELL0009 |
| Frequency Range | 806-821 MHz |
| Equipment Class | AMP - Amplifier |
| Device Description | Spotcell 163 IDEN DU / 167 PTR DU |
| Responsible Party | Jay R Sengupta, Engineering Manager, jay.sengupta@spotwave.com , 613-591-1662 |
| Agent | Jason Jason Jason, Nemko Canada, jason.nixon@nemko.com  , 613 737 9680 |
| Test Firm | Charles Neal, Nemko Canada Inc. (Ottawa), charles.neal@nemko.com , 613-737-9680 |
| TCB Email | joanna.olszanowska@nemko.com |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz) |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change. Power listed is conducted and composite for multi-channel operation. Grant Conditions – The antenna(s) used for this transmitter are to be fixed-mounted on permanent structures providing a separation distance of at least 40 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3) |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| NXe7kngsljXCDlEyyVsjtw== | 2006-11-29 | Class II permissive change or modification of presently authorized equipment |
| PxYRr+YZmJxVrQu+cXm7wg== | 2004-02-05 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application PxYRr+YZmJxVrQu+cXm7wg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 02/05/2004 Application Dated: 02/05/2004 |
| Spotwave Wireless Ltd. |
| 500 Van Buren Street |
| Kemptville, Ontario, K0G 1J0 Canada |
| Attention: Jay Sengupta , Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P3YSPOTCELL0009 |
| Name of Grantee: | Spotwave Wireless Ltd. |
| Equipment Class: | Amplifier |
| Notes: | Spotcell 163 IDEN DU |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 806.0 - 821.0 | 1.0 | G7W |
| Power listed is conducted and composite for multi-channel operation. Grant Conditions – The antenna(s) used for this transmitter are to be fixed-mounted on permanent structures providing a separation distance of at least 40 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). |
EAS Grant - Application PxYRr+YZmJxVrQu+cXm7wg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Spotwave Wireless Ltd. 500 Van Buren Street Kemptville, Ontario, K0G 1J0 Canada |
Date of Grant: 02/05/2004 Application Dated: 02/05/2004 |
| Attention: Jay Sengupta , Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P3YSPOTCELL0009 |
| Name of Grantee: | Spotwave Wireless Ltd. |
| Equipment Class: | Amplifier |
| Notes: | Spotcell 163 IDEN DU |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 806.0 - 821.0 | 1.0 | G7W |
| Power listed is conducted and composite for multi-channel operation. Grant Conditions – The antenna(s) used for this transmitter are to be fixed-mounted on permanent structures providing a separation distance of at least 40 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/29/2006 Application Dated: 11/29/2006 |
| Spotwave Wireless Ltd. |
| 500 Van Buren Street |
| Kemptville, Ontario, K0G 1J0 Canada |
| Attention: Jay Sengupta , Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P3YSPOTCELL0009 |
| Name of Grantee: | Spotwave Wireless Ltd. |
| Equipment Class: | Amplifier |
| Notes: | Spotcell 163 IDEN DU / 167 PTR DU |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 806.0 - 821.0 | 1.0 | Amp | G7W | |
| 90 | 806.0 - 821.0 | 1.0 | Amp | G9W |
| Class II permissive change. Power listed is conducted and composite for multi-channel operation. Grant Conditions – The antenna(s) used for this transmitter are to be fixed-mounted on permanent structures providing a separation distance of at least 40 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3) |
EAS Grant - Application NXe7kngsljXCDlEyyVsjtw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Spotwave Wireless Ltd. 500 Van Buren Street Kemptville, Ontario, K0G 1J0 Canada |
Date of Grant: 11/29/2006 Application Dated: 11/29/2006 |
| Attention: Jay Sengupta , Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P3YSPOTCELL0009 |
| Name of Grantee: | Spotwave Wireless Ltd. |
| Equipment Class: | Amplifier |
| Notes: | Spotcell 163 IDEN DU / 167 PTR DU |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 806.0 - 821.0 | 1.0 | Amp | G7W | |
| 90 | 806.0 - 821.0 | 1.0 | Amp | G9W |
| Class II permissive change. Power listed is conducted and composite for multi-channel operation. Grant Conditions – The antenna(s) used for this transmitter are to be fixed-mounted on permanent structures providing a separation distance of at least 40 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3) |
| Mail To: |