1. FCC ID
  2. P3Y
  3. P3YSPOTCELL0010

FCC ID P3YSPOTCELL0010

Spotcell 163 IDEN CU / 167 PTR CU

by Spotwave Wireless Ltd.

Grantee Code: P3Y   Product Code: SPOTCELL0010
Latest application date: 2006-11-29

FCC ID Device Details

FCC IDP3YSPOTCELL0010
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeP3Y
Product CodeSPOTCELL0010
Applicant BusinessSpotwave Wireless Ltd. 🇨🇦
Related Domains spotwave.com
Equipment ClassSpotcell 163 IDEN CU / 167 PTR CU
Test FirmNemko Canada Inc. (Ottawa)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
851-866 MHzClass II permissive change or modification of presently authorized equipment2006-11-29
851-866 MHzOriginal Equipment2004-02-05

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2006-11-29PDF 1.5 MB
Coverage Extension Install Guide for Spotcell 163Users Manual2004-02-05PDF 396.5 KB
SpotCell 163 User ManualUsers Manual2004-02-05PDF 1.6 MB
SpotCell QuickStartUsers Manual2004-02-05PDF 313.3 KB
Internal ViewsInternal Photos2004-02-05PDF 1.4 MB
External ViewsExternal Photos2004-02-05PDF 522.7 KB
Label 1ID Label/Location Info2006-11-29PDF 71.7 KB
Label 2ID Label/Location Info2006-11-29PDF 71.7 KB
CU LabelID Label/Location Info2004-02-05PDF 42.1 KB
Label LocationID Label/Location Info2004-02-05PDF 60.6 KB
Test setup photoTest Setup Photos2004-02-05PDF 160.1 KB
Test reportTest Report2006-11-29PDF 400.4 KB
Test ReportTest Report2004-02-05PDF 253.1 KB
AuthorityCover Letter(s)2006-11-29PDF 17.5 KB
Class II Permissive ChangesCover Letter(s)2006-11-29PDF 25.5 KB
Confidentiality requestCover Letter(s)2004-02-05PDF 71.2 KB
RF Exposure InformationRF Exposure Info2004-02-05PDF 153.2 KB
Specifications of DownLink AmpParts List/Tune Up Info2004-02-05PDF 91.8 KB
Specifications of UpLink Final Stage AMPParts List/Tune Up Info2004-02-05PDF 468.4 KB
Specifications of VCOParts List/Tune Up Info2004-02-05PDF 159.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 141.2 KB
CU Schematics Metadata onlySchematicsPDF 412.7 KB
Operational description Metadata onlyOperational DescriptionPDF 76.9 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 43.2 KB

Application Information

Application IDrxDIy5VULt79/++XoWqA8A==
Final Action Date2006-11-29
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0005792155
ModelSPOTCELL0010
Frequency Range851-866 MHz
Equipment ClassAMP - Amplifier
Device DescriptionSpotcell 163 IDEN CU / 167 PTR CU
Responsible PartyJay R Sengupta, Engineering Manager, jay.sengupta@spotwave.com , 613-591-1662
AgentJason Jason Jason, Nemko Canada, jason.nixon@nemko.com , 613 737 9680
Test FirmCharles Neal, Nemko Canada Inc. (Ottawa), charles.neal@nemko.com , 613-737-9680
TCB Emailjoanna.olszanowska@nemko.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II permissive change. Power listed is conducted and composite for multi-channel operation. Grant Conditions – The antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3)

Applications

Application IDDatePurpose
rxDIy5VULt79/++XoWqA8A==2006-11-29Class II permissive change or modification of presently authorized equipment
SjpWDy0UWAQ+iiHvafV5bg==2004-02-05Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
851-866 MHz0.025AmpG7W9
851-866 MHz0.0250000G7W90
851-866 MHz0.025AmpG9W9

Grants

TCB Grant - Application SjpWDy0UWAQ+iiHvafV5bg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
 Date of Grant: 02/05/2004

Application Dated: 02/05/2004
Spotwave Wireless Ltd.
500 Van Buren Street
Kemptville, Ontario, K0G 1J0
Canada
 
Attention: Jay Sengupta , Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P3YSPOTCELL0010
Name of Grantee:  Spotwave Wireless Ltd.
Equipment Class: Amplifier
Notes: Spotcell 163 IDEN CU
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90 851.0  -  866.0 0.025   G7W

Power listed is conducted and composite for multi-channel operation.

Grant Conditions – The antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).


EAS Grant - Application SjpWDy0UWAQ+iiHvafV5bg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Spotwave Wireless Ltd.
500 Van Buren Street
Kemptville, Ontario, K0G 1J0
Canada 		  Date of Grant: 02/05/2004

Application Dated: 02/05/2004
 
Attention: Jay Sengupta , Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P3YSPOTCELL0010
Name of Grantee:  Spotwave Wireless Ltd.
Equipment Class: Amplifier
Notes: Spotcell 163 IDEN CU
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90 851.0  -  866.0 0.025   G7W

Power listed is conducted and composite for multi-channel operation.

Grant Conditions – The antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).



TCB Grant - Application rxDIy5VULt79/++XoWqA8A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 11/29/2006

Application Dated: 11/29/2006
Spotwave Wireless Ltd.
500 Van Buren Street
Kemptville, Ontario, K0G 1J0
Canada
 
Attention: Jay Sengupta , Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P3YSPOTCELL0010
Name of Grantee:  Spotwave Wireless Ltd.
Equipment Class: Amplifier
Notes: Spotcell 163 IDEN CU / 167 PTR CU
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90 851.0  -  866.0 0.025  Amp G7W
90 851.0  -  866.0 0.025  Amp G9W

Class II permissive change. Power listed is conducted and composite for multi-channel operation.

Grant Conditions – The antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3)


EAS Grant - Application rxDIy5VULt79/++XoWqA8A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Spotwave Wireless Ltd.
500 Van Buren Street
Kemptville, Ontario, K0G 1J0
Canada 		  Date of Grant: 11/29/2006

Application Dated: 11/29/2006
 
Attention: Jay Sengupta , Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P3YSPOTCELL0010
Name of Grantee:  Spotwave Wireless Ltd.
Equipment Class: Amplifier
Notes: Spotcell 163 IDEN CU / 167 PTR CU
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90 851.0  -  866.0 0.025  Amp G7W
90 851.0  -  866.0 0.025  Amp G9W

Class II permissive change. Power listed is conducted and composite for multi-channel operation.

Grant Conditions – The antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3)



Mail To: