FCC ID P4I-BTM702A
Bluetooth Module BT5.0
by Flaircomm Microelectronics,Inc.
Grantee Code: P4I Product Code: BTM702A
Latest application date: 2018-12-20
FCC ID Device Details
| FCC ID | P4I-BTM702A |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | P4I |
| Product Code | BTM702A |
| Applicant Business | Flaircomm Microelectronics,Inc. 🇨🇳 |
| Related Domains |  flairmicro.com  morlab.cn |
| Equipment Class | Bluetooth Module BT5.0 |
| Test Firm | Shenzhen Morlab Communications Technology Co. Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2018-12-20 |
| 2402-2480 MHz | Original Equipment | 2018-12-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2018-12-20 | PDF 2.7 MB |
| instruction guide_trace guide | Users Manual | 2018-12-20 | PDF 429.8 KB |
| Internal Photos | Internal Photos | 2018-12-20 | PDF 411.2 KB |
| External Photos | External Photos | 2018-12-20 | PDF 424.2 KB |
| ID Label/Location Info | ID Label/Location Info | 2018-12-20 | PDF 72.2 KB |
| Test Setup Photos | Test Setup Photos | 2018-12-20 | PDF 252.2 KB |
| Test Report | Test Report | 2018-12-20 | PDF 1.6 MB |
| Test Report | Test Report | 2018-12-20 | PDF 4.3 MB |
| Antenna | Cover Letter(s) | 2018-12-20 | PDF 330.4 KB |
| Antenna | Cover Letter(s) | 2018-12-20 | PDF 2.4 MB |
| Authorization Letter | Cover Letter(s) | 2018-12-20 | PDF 67.4 KB |
| Confidentiality | Cover Letter(s) | 2018-12-20 | PDF 55.1 KB |
| Modular Approval Request | Cover Letter(s) | 2018-12-20 | PDF 111.8 KB |
| MPE | RF Exposure Info | 2018-12-20 | PDF 353.4 KB |
| Block Diagram Metadata only | Block Diagram | PDF 203.8 KB | |
| Schematics Metadata only | Schematics | PDF 121.1 KB | |
| Operational Description Metadata only | Operational Description | PDF 230 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 136 KB |
Application Information
| Application ID | Gk8Ro1ywoG6iO0i2WjVlMA== |
|---|---|
| Final Action Date | 2018-12-20 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0021950167 |
| Model | BTM702A |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth Module BT5.0 |
| Responsible Party | chenzhou yu, chenzhou.yu@flairmicro.com , +86-591-88833388 |
| Agent | Catherine. Catherine. Catherine., Shenzhen Morlab Communications Technology, 86075536698618 |
| Technical Contact | Ivy Zhu, Shenzhen Morlab Communications Technology, Catherine.chen@morlab.cn , 86075536698618 |
| Non-Technical Contact | Ivy Zhu, Shenzhen Morlab Communications Technology, Catherine.chen@morlab.cn , 86075536698618 |
| Test Firm | Mr. Su Feng, Shenzhen Morlab Communications Technology Co. Ltd., Zx.sun@morlab.cn , +86 755 36698566 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited single Modular Approval. Output power listed is conducted. This LMA does not have RF shielding and is tested and approved as standalone configuration, additional evaluation may be required for any system integrated this radio module. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Gk8Ro1ywoG6iO0i2WjVlMA== | 2018-12-20 | Original Equipment |
| 2HSG2TZe6zWvMI/ZT4Rqcw== | 2018-12-20 | Original Equipment |
Grants
TCB Grant - Application Gk8Ro1ywoG6iO0i2WjVlMA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 12/20/2018 Application Dated: 12/19/2018 |
| Flaircomm Microelectronics,Inc. |
| 7F,Guomai Building,116 East JiangBin Ave,Fuzhou |
| Fuzhou,Fujian,, China |
| Attention: chenzhou yu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P4I-BTM702A |
| Name of Grantee: | Flaircomm Microelectronics,Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module BT5.0 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 |
| Limited single Modular Approval. Output power listed is conducted. This LMA does not have RF shielding and is tested and approved as standalone configuration, additional evaluation may be required for any system integrated this radio module. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
EAS Grant - Application Gk8Ro1ywoG6iO0i2WjVlMA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Flaircomm Microelectronics,Inc. 7F,Guomai Building,116 East JiangBin Ave,Fuzhou Fuzhou,Fujian,, China |
Date of Grant: 12/20/2018 Application Dated: 12/19/2018 |
| Attention: chenzhou yu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P4I-BTM702A |
| Name of Grantee: | Flaircomm Microelectronics,Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module BT5.0 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 |
| Limited single Modular Approval. Output power listed is conducted. This LMA does not have RF shielding and is tested and approved as standalone configuration, additional evaluation may be required for any system integrated this radio module. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 12/20/2018 Application Dated: 12/19/2018 |
| Flaircomm Microelectronics,Inc. |
| 7F,Guomai Building,116 East JiangBin Ave,Fuzhou |
| Fuzhou,Fujian,, China |
| Attention: chenzhou yu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P4I-BTM702A |
| Name of Grantee: | Flaircomm Microelectronics,Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Module BT5.0 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.01 |
| Limited single Modular Approval. Output power listed is conducted. This LMA does not have RF shielding and is tested and approved as standalone configuration, additional evaluation may be required for any system integrated this radio module. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
EAS Grant - Application 2HSG2TZe6zWvMI/ZT4Rqcw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Flaircomm Microelectronics,Inc. 7F,Guomai Building,116 East JiangBin Ave,Fuzhou Fuzhou,Fujian,, China |
Date of Grant: 12/20/2018 Application Dated: 12/19/2018 |
| Attention: chenzhou yu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P4I-BTM702A |
| Name of Grantee: | Flaircomm Microelectronics,Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Module BT5.0 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.01 |
| Limited single Modular Approval. Output power listed is conducted. This LMA does not have RF shielding and is tested and approved as standalone configuration, additional evaluation may be required for any system integrated this radio module. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| Mail To: |