FCC ID P4I-BTM702D
Bluetooth Module BT5.0
by Flaircomm Microelectronics,Inc.
Grantee Code: P4I Product Code: BTM702D
Latest application date: 2018-11-07
FCC ID Device Details
| FCC ID | P4I-BTM702D |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | P4I |
| Product Code | BTM702D |
| Applicant Business | Flaircomm Microelectronics,Inc. 🇨🇳 |
| Related Domains |  flairmicro.com  morlab.cn |
| Equipment Class | Bluetooth Module BT5.0 |
| Test Firm | Shenzhen Morlab Communications Technology Co. Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2018-11-07 |
| 2402-2480 MHz | Original Equipment | 2018-11-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2018-11-07 | PDF 2.9 MB |
| Internal Photos | Internal Photos | 2018-11-07 | PDF 1.3 MB |
| External Photos | External Photos | 2018-11-07 | PDF 917.3 KB |
| ExternalPhotos with antenna | External Photos | 2018-11-07 | PDF 201.9 KB |
| ID Label/Location Info | ID Label/Location Info | 2018-11-07 | PDF 95.1 KB |
| Test Setup Photos | Test Setup Photos | 2018-11-07 | PDF 146.3 KB |
| Test Report | Test Report | 2018-11-07 | PDF 1.6 MB |
| Test Report | Test Report | 2018-11-07 | PDF 4.4 MB |
| Authorization Letter | Cover Letter(s) | 2018-11-07 | PDF 67.4 KB |
| Confidentiality | Cover Letter(s) | 2018-11-07 | PDF 87 KB |
| FCC Modular Approval Request | Cover Letter(s) | 2018-11-07 | PDF 107.7 KB |
| MPE | RF Exposure Info | 2018-11-07 | PDF 345.6 KB |
| MPE | RF Exposure Info | 2018-11-07 | PDF 2.2 MB |
| Block Diagram Metadata only | Block Diagram | PDF 171.5 KB | |
| Schematics Metadata only | Schematics | PDF 344.8 KB | |
| Operational Description Metadata only | Operational Description | PDF 135.4 KB |
Application Information
| Application ID | fMiSepBAKpHohtQa0ya3rQ== |
|---|---|
| Final Action Date | 2018-11-07 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0021950167 |
| Model | BTM702D |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth Module BT5.0 |
| Responsible Party | chenzhou yu, chenzhou.yu@flairmicro.com , +86-591-88833388 |
| Agent | Catherine. Catherine. Catherine., Shenzhen Morlab Communications Technology Co., Ltd, Catherine.chen@morlab.cn , 86075536698618 |
| Technical Contact | Ivy Zhu, Shenzhen Morlab Communications Technology Co., Ltd, Catherine.chen@morlab.cn , 86075536698618 |
| Non-Technical Contact | Ivy Zhu, Shenzhen Morlab Communications Technology Co., Ltd, Catherine.chen@morlab.cn , 86075536698618 |
| Test Firm | Mr. Su Feng, Shenzhen Morlab Communications Technology Co. Ltd., Zx.sun@morlab.cn , +86 755 36698566 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Limited modular approval: Antenna on PCB board. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| fMiSepBAKpHohtQa0ya3rQ== | 2018-11-07 | Original Equipment |
| HF784iOzKTAij7GCmKx0pg== | 2018-11-07 | Original Equipment |
Grants
TCB Grant - Application HF784iOzKTAij7GCmKx0pg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 11/07/2018 Application Dated: 10/31/2018 |
| Flaircomm Microelectronics,Inc. |
| 7F,Guomai Building,116 East JiangBin Ave,Fuzhou |
| Fuzhou,Fujian,, China |
| Attention: chenzhou yu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P4I-BTM702D |
| Name of Grantee: | Flaircomm Microelectronics,Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Module BT5.0 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.01 |
| Output power listed is conducted. Limited modular approval: Antenna on PCB board. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application HF784iOzKTAij7GCmKx0pg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Flaircomm Microelectronics,Inc. 7F,Guomai Building,116 East JiangBin Ave,Fuzhou Fuzhou,Fujian,, China |
Date of Grant: 11/07/2018 Application Dated: 10/31/2018 |
| Attention: chenzhou yu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P4I-BTM702D |
| Name of Grantee: | Flaircomm Microelectronics,Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Module BT5.0 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.01 |
| Output power listed is conducted. Limited modular approval: Antenna on PCB board. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 11/07/2018 Application Dated: 10/31/2018 |
| Flaircomm Microelectronics,Inc. |
| 7F,Guomai Building,116 East JiangBin Ave,Fuzhou |
| Fuzhou,Fujian,, China |
| Attention: chenzhou yu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P4I-BTM702D |
| Name of Grantee: | Flaircomm Microelectronics,Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module BT5.0 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.008 |
| Output power listed is conducted. Limited modular approval: Antenna on PCB board. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application fMiSepBAKpHohtQa0ya3rQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Flaircomm Microelectronics,Inc. 7F,Guomai Building,116 East JiangBin Ave,Fuzhou Fuzhou,Fujian,, China |
Date of Grant: 11/07/2018 Application Dated: 10/31/2018 |
| Attention: chenzhou yu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P4I-BTM702D |
| Name of Grantee: | Flaircomm Microelectronics,Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module BT5.0 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.008 |
| Output power listed is conducted. Limited modular approval: Antenna on PCB board. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |