FCC ID P4I-BTM901
Bluetooth Module
by Flaircomm Microelectronics,Inc.
Grantee Code: P4I Product Code: BTM901
Latest application date: 2020-04-02
FCC ID Device Details
| FCC ID | P4I-BTM901 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | P4I |
| Product Code | BTM901 |
| Applicant Business | Flaircomm Microelectronics,Inc. 🇨🇳 |
| Related Domains |  flairmicro.com |
| Equipment Class | Bluetooth Module |
| Test Firm | SHENZHEN TONGCE TESTING LAB |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2020-04-02 |
| 2402-2480 MHz | Original Equipment | 2020-04-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2020-04-02 | PDF 2.4 MB |
| User_manual | Users Manual | 2020-04-02 | PDF 2.4 MB |
| Internal_Photos | Internal Photos | 2020-04-02 | PDF 440.5 KB |
| External_photos | External Photos | 2020-04-02 | PDF 406.8 KB |
| label | ID Label/Location Info | 2020-04-02 | PDF 285.3 KB |
| Test_Setup_photo | Test Setup Photos | 2020-04-02 | PDF 250 KB |
| TCT200311E004 FCC ID 15.247 BT | Test Report | 2020-04-02 | PDF 2.7 MB |
| TCT200311E010 FCC ID 15.247 LE | Test Report | 2020-04-02 | PDF 1.7 MB |
| Agent Authorization | Cover Letter(s) | 2020-04-02 | PDF 31.5 KB |
| Agent_Authorization_Rev_1.0 | Cover Letter(s) | 2020-04-02 | PDF 24.6 KB |
| FCC Modular Approval Request Rev 3.0 | Cover Letter(s) | 2020-04-02 | PDF 113.5 KB |
| FCC_Long_Term_Only_Confidentiality_Request | Cover Letter(s) | 2020-04-02 | PDF 60.3 KB |
| Model Statement | Cover Letter(s) | 2020-04-02 | PDF 81.8 KB |
| declaration | Cover Letter(s) | 2020-04-02 | PDF 133 KB |
| RF exposure report | RF Exposure Info | 2020-04-02 | PDF 70.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 330.1 KB | |
| SCH Metadata only | Schematics | PDF 112.5 KB | |
| Operational_Description Metadata only | Operational Description | PDF 329.7 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 31 KB |
Application Information
| Application ID | nrMWMITM034f3FOdTrzTaA== |
|---|---|
| Final Action Date | 2020-04-02 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0021950167 |
| Model | BTM901 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth Module |
| Responsible Party | chenzhou yu, chenzhou.yu@flairmicro.com , +86-591-88833388 |
| Technical Contact | Flaircomm Microelectronics, Inc., chenzhou.yu@flairmicro.com |
| Test Firm | Beryl Zhao, SHENZHEN TONGCE TESTING LAB, berylzhao@tct-lab.com  , +8675527208735 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| nrMWMITM034f3FOdTrzTaA== | 2020-04-02 | Original Equipment |
| RjSJWHcV17pisokWlcqBVw== | 2020-04-02 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application RjSJWHcV17pisokWlcqBVw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 04/02/2020 Application Dated: 04/02/2020 |
| Flaircomm Microelectronics,Inc. |
| 7F,Guomai Building,116 East JiangBin Ave,Fuzhou |
| Fuzhou,Fujian,, China |
| Attention: chenzhou yu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P4I-BTM901 |
| Name of Grantee: | Flaircomm Microelectronics,Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0024 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application RjSJWHcV17pisokWlcqBVw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Flaircomm Microelectronics,Inc. 7F,Guomai Building,116 East JiangBin Ave,Fuzhou Fuzhou,Fujian,, China |
Date of Grant: 04/02/2020 Application Dated: 04/02/2020 |
| Attention: chenzhou yu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P4I-BTM901 |
| Name of Grantee: | Flaircomm Microelectronics,Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0024 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 04/02/2020 Application Dated: 04/02/2020 |
| Flaircomm Microelectronics,Inc. |
| 7F,Guomai Building,116 East JiangBin Ave,Fuzhou |
| Fuzhou,Fujian,, China |
| Attention: chenzhou yu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P4I-BTM901 |
| Name of Grantee: | Flaircomm Microelectronics,Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0052 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application nrMWMITM034f3FOdTrzTaA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Flaircomm Microelectronics,Inc. 7F,Guomai Building,116 East JiangBin Ave,Fuzhou Fuzhou,Fujian,, China |
Date of Grant: 04/02/2020 Application Dated: 04/02/2020 |
| Attention: chenzhou yu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P4I-BTM901 |
| Name of Grantee: | Flaircomm Microelectronics,Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0052 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |