FCC ID P4JDTE-3

This application does not exist.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Microsoft Corporation 1 Microsoft Way Redmond, WA 98052 United States

Date of Grant: 03/13/2003 Application Dated: 01/17/2003

Attention: Hasnain Syed , Director, EMC, SI and RF Compliance

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	P4JDTE-3
Name of Grantee:	Microsoft Corporation
Equipment Class:	PCS Licensed Transmitter
Notes:	Dual-Band GPRS/WLAN PCMCIA Card
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC	22.901(d)	824.2  -  848.8	0.537	0.1  PM	300KGXW
BC	24E	1850.2  -  1909.8	0.94	0.1  PM	300KGXW

Power is ERP for Part 22 and EIRP for Part 24.

Output power is radiated as tested in one specific notebook computer. Device has been tested for SAR compliance in three notebook computers with side PCMCIA slots, and in three palmtop computers with rear PCMCIA slot, as described in this filing, and can be used in notebook and palmtop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. SAR tests account for lap-held and end-on positions for certain user and bystander conditions. Next-to-body SAR compliance is limited to use with a specific spacer, as accepted for this filing. A specific instruction label, as accepted for this filing, must be displayed on the device to inform users about the operating requirements for satisfying SAR compliance. Use of other accessories may not ensure compliance with RF exposure guidelines. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The maximum reported SAR values from the three-host testing are: Part 22 - body: 0.59 W/kg; Part 24 - body: 0.9 W/kg.

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application /2fstevHLnik1iGRYGpP5Q==

EAS Grant - Application /2fstevHLnik1iGRYGpP5Q==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Microsoft Corporation 1 Microsoft Way Redmond, WA 98052 United States

Date of Grant: 03/13/2003 Application Dated: 01/17/2003

Attention: Hasnain Syed , Director, EMC, SI and RF Compliance

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	P4JDTE-3
Name of Grantee:	Microsoft Corporation
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Dual-Band GPRS/WLAN PCMCIA Card
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.206

Output power is peak conducted as tested in one specific notebook computer. Device has been tested for SAR compliance in three notebook computers with side PCMCIA slots, and in three palmtop computers with rear PCMCIA slot, as described in this filing, and can be used in notebook and palmtop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. SAR tests account for lap-held and end-on positions for certain user and bystander conditions. Next-to-body SAR compliance is limited to use with a specific spacer, as accepted for this filing. A specific instruction label, as accepted for this filing, must be displayed on the device to inform users about the operating requirements for satisfying SAR compliance. Use of other accessories may not ensure compliance with RF exposure guidelines. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The maximum reported SAR values from the three-host testing are: Part 15 -body: 0.15 W/kg.

Mail To: