FCC ID P5IMBS2LP

Mobile base station with L-Band Sat, GSM and WLAN

by Wireless Matrix Corporation

Grantee Code: P5I   Product Code: MBS2LP
Latest application date: 2005-11-19

FCC ID Device Details

FCC IDP5IMBS2LP
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeP5I
Product CodeMBS2LP
Applicant BusinessWireless Matrix Corporation 🇺🇸
Equipment ClassMobile base station with L-Band Sat, GSM and WLAN
Test FirmCetecom Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
842.2-848.8 MHzOriginal Equipment2005-11-19
1626.5-1660 MHzOriginal Equipment2005-11-19
2412-2462 MHzOriginal Equipment2005-11-19

Exhibits

DocumentTypeAvailableFile
Installation InstructionsUsers Manual2005-11-19PDF 255.5 KB
Installer GuideUsers Manual2005-11-19PDF 255.5 KB
User GuideUsers Manual2005-11-19PDF 161 KB
Internal PhotosInternal Photos2005-11-19PDF 265.6 KB
Internal PhotosInternal Photos2005-11-19PDF 201 KB
Internal Photos 1Internal Photos2005-11-19PDF 1.7 MB
Internal Photos 2Internal Photos2005-11-19PDF 2.9 MB
Internal Photos 3Internal Photos2005-11-19PDF 3 MB
Extenal PhotosExternal Photos2005-11-19PDF 194.7 KB
External PhotosExternal Photos2005-11-19PDF 194.7 KB
LabelID Label/Location Info2005-11-19PDF 172.5 KB
Test Setup PhotosTest Setup Photos2005-11-19PDF 127.2 KB
ConductedTest Report2005-11-19PDF 330.7 KB
ConductedTest Report2005-11-19PDF 525.3 KB
ConductedTest Report2005-11-19PDF 311.1 KB
Conducted Annex 1Test Report2005-11-19PDF 136 KB
Conducted Annex 2Test Report2005-11-19PDF 917.8 KB
Conducted Annex 3Test Report2005-11-19PDF 142.6 KB
EMCTest Report2005-11-19PDF 251.1 KB
EMCTest Report2005-11-19PDF 219.9 KB
EMCTest Report2005-11-19PDF 427.9 KB
Provider LetterAttestation Statements2005-11-19PDF 96.5 KB
Confidentiality RequestCover Letter(s)2005-11-19PDF 119.1 KB
RF Exposure InfoRF Exposure Info2005-11-19PDF 301.2 KB
Rf Exposure InfoRF Exposure Info2005-11-19PDF 301.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 17.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 14.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 25.8 KB
Schematics Metadata onlySchematicsPDF 344.8 KB
Schematics Metadata onlySchematicsPDF 906.1 KB
Schematics Metadata onlySchematicsPDF 2.6 MB
Operational Description Metadata onlyOperational DescriptionPDF 81.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 12.6 KB
Operational Description Metadata onlyOperational DescriptionPDF 228 KB
Part List Metadata onlyParts List/Tune Up InfoPDF 92.8 KB
Tune Up Info Metadata onlyParts List/Tune Up InfoPDF 11.7 KB
Tune Up Info Metadata onlyParts List/Tune Up InfoPDF 363 KB

Application Information

Application IDksKU0A6ngZZIz+KyoByT0Q==
Final Action Date2005-11-19
Application PurposeOriginal Equipment
Applicant FRN0010465854
ModelMBS2LP
Frequency Range842.2-848.8 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionMobile base station with L-Band Sat, GSM and WLAN
Responsible PartyDarryl Strucko, P.E., Sr. Systems Engineer, dstrucko@yahoo.com , 703-262-4021
Test FirmLothar Schmidt, Cetecom Inc., lothar.schmidt@cetecomusa.com , 408-586-6200
TCB Emailgerald.schmidt@cetecom-ict.de
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is ERP for Part 22 and EIRP for Part 24.This filing is applicable for Satellite, WLAN and GSM/GPRS operations as demonstrated in the filing. The antennas and transmitters in this device must be installed by the manufacturer as shown in the filing. The antennas must be installed to provide a separation distance of at least 63 cm from all persons The antennas must not be co-located or operating in conjunction with any other antenna(s) or transmitter than included in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
ksKU0A6ngZZIz+KyoByT0Q==2005-11-19Original Equipment
D87DDEpUKwi2L05eEvoq5Q==2005-11-19Original Equipment
Ba3EIBHdrZl98L/WqZ0z6g==2005-11-19Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
842.2-848.8 MHz0.440.029ppm300KGXW22H
1626.5-1660 MHz49.660000012.5000000000Hz5K40DXD25
1850.2-1909.8 MHz1.110.034ppm300KGXW24E
2412-2462 MHz0.093000015C

Grants

TCB Grant - Application ksKU0A6ngZZIz+KyoByT0Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CTC advanced GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 11/19/2005

Application Dated: 11/19/2005
Wireless Matrix Corporation
12369-B Sunrise Valley Drive
Reston, VA 20191
 
Attention: Darryl Strucko , P.E., Sr. Systems Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P5IMBS2LP
Name of Grantee:  Wireless Matrix Corporation
Equipment Class: PCS Licensed Transmitter
Notes: Mobile base station with L-Band Sat, GSM and WLAN
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 1.11 0.034  PM 300KGXW
22H 842.2  -  848.8 0.44 0.029  PM 300KGXW

Power output listed is ERP for Part 22 and EIRP for Part 24.This filing is applicable for Satellite, WLAN and GSM/GPRS operations as demonstrated in the filing. The antennas and transmitters in this device must be installed by the manufacturer as shown in the filing. The antennas must be installed to provide a separation distance of at least 63 cm from all persons The antennas must not be co-located or operating in conjunction with any other antenna(s) or transmitter than included in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application ksKU0A6ngZZIz+KyoByT0Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wireless Matrix Corporation
12369-B Sunrise Valley Drive
Reston, VA 20191
United States
  Date of Grant: 11/19/2005

Application Dated: 11/19/2005
 
Attention: Darryl Strucko , P.E., Sr. Systems Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P5IMBS2LP
Name of Grantee:  Wireless Matrix Corporation
Equipment Class: PCS Licensed Transmitter
Notes: Mobile base station with L-Band Sat, GSM and WLAN
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 1.11 0.034  PM 300KGXW
22H 842.2  -  848.8 0.44 0.029  PM 300KGXW

Power output listed is ERP for Part 22 and EIRP for Part 24.This filing is applicable for Satellite, WLAN and GSM/GPRS operations as demonstrated in the filing. The antennas and transmitters in this device must be installed by the manufacturer as shown in the filing. The antennas must be installed to provide a separation distance of at least 63 cm from all persons The antennas must not be co-located or operating in conjunction with any other antenna(s) or transmitter than included in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application D87DDEpUKwi2L05eEvoq5Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CTC advanced GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 11/19/2005

Application Dated: 11/19/2005
Wireless Matrix Corporation
12369-B Sunrise Valley Drive
Reston, VA 20191
 
Attention: Darryl Strucko , P.E., Sr. Systems Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P5IMBS2LP
Name of Grantee:  Wireless Matrix Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Mobile base station with L-Band Sat, GSM and WLAN
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
25 1626.5  -  1660.0 49.66 12.5  Hz 5K40DXD

Power output listed is EIRP. Power output listed is ERP for Part 22 and EIRP for Part 24.This filing is applicable for Satellite, WLAN and GSM/GPRS operations as demonstrated in the filing. The antennas and transmitters in this device must be installed by the manufacturer as shown in the filing. The antennas must be installed to provide a separation distance of at least 63 cm from all persons The antennas must not be co-located or operating in conjunction with any other antenna(s) or transmitter than included in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application D87DDEpUKwi2L05eEvoq5Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wireless Matrix Corporation
12369-B Sunrise Valley Drive
Reston, VA 20191
United States
  Date of Grant: 11/19/2005

Application Dated: 11/19/2005
 
Attention: Darryl Strucko , P.E., Sr. Systems Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P5IMBS2LP
Name of Grantee:  Wireless Matrix Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Mobile base station with L-Band Sat, GSM and WLAN
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
25 1626.5  -  1660.0 49.66 12.5  Hz 5K40DXD

Power output listed is EIRP. Power output listed is ERP for Part 22 and EIRP for Part 24.This filing is applicable for Satellite, WLAN and GSM/GPRS operations as demonstrated in the filing. The antennas and transmitters in this device must be installed by the manufacturer as shown in the filing. The antennas must be installed to provide a separation distance of at least 63 cm from all persons The antennas must not be co-located or operating in conjunction with any other antenna(s) or transmitter than included in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application Ba3EIBHdrZl98L/WqZ0z6g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CTC advanced GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 11/19/2005

Application Dated: 11/19/2005
Wireless Matrix Corporation
12369-B Sunrise Valley Drive
Reston, VA 20191
 
Attention: Darryl Strucko , P.E., Sr. Systems Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P5IMBS2LP
Name of Grantee:  Wireless Matrix Corporation
Equipment Class: Digital Transmission System
Notes: Mobile base station with L-Band Sat, GSM and WLAN
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.093  

Power output listed is conducted. This filing is applicable for Satellite, WLAN and GSM/GPRS operations as demonstrated in the filing. The antennas and transmitters in this device must be installed by the manufacturer as shown in the filing. The antennas must be installed to provide a separation distance of at least 63 cm from all persons The antennas must not be co-located or operating in conjunction with any other antenna(s) or transmitter than included in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application Ba3EIBHdrZl98L/WqZ0z6g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wireless Matrix Corporation
12369-B Sunrise Valley Drive
Reston, VA 20191
United States
  Date of Grant: 11/19/2005

Application Dated: 11/19/2005
 
Attention: Darryl Strucko , P.E., Sr. Systems Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P5IMBS2LP
Name of Grantee:  Wireless Matrix Corporation
Equipment Class: Digital Transmission System
Notes: Mobile base station with L-Band Sat, GSM and WLAN
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.093  

Power output listed is conducted. This filing is applicable for Satellite, WLAN and GSM/GPRS operations as demonstrated in the filing. The antennas and transmitters in this device must be installed by the manufacturer as shown in the filing. The antennas must be installed to provide a separation distance of at least 63 cm from all persons The antennas must not be co-located or operating in conjunction with any other antenna(s) or transmitter than included in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: