FCC ID P5MRFI148

RFI-148 250 Paging Transmitter

by STI Engineering Pty Ltd

Grantee Code: P5M   Product Code: RFI148
Latest application date: 2022-05-05

FCC ID Device Details

FCC IDP5MRFI148
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeP5M
Product CodeRFI148
Applicant BusinessSTI Engineering Pty Ltd 🇦🇺
Related Domains stiengineering.com.au
Equipment ClassRFI-148 250 Paging Transmitter
Test FirmEMC Technologies (NZ) Ltd

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
153.5-159.5 MHzClass II permissive change or modification of presently authorized equipment2022-05-05
150-174 MHzClass II permissive change or modification of presently authorized equipment2019-11-18
150-174 MHzOriginal Equipment2013-01-31

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2022-05-05PDF 3.1 MB
User ManualUsers Manual2019-11-18PDF 1.1 MB
User ManualUsers Manual2013-01-31PDF 1.2 MB
Internal PhotosInternal Photos2022-05-05PDF 1.1 MB
Internal Photos OriginalInternal Photos2019-11-18PDF 932.2 KB
Internal PhotosInternal Photos2013-01-31PDF 932.2 KB
External PhotosExternal Photos2022-05-05PDF 664.6 KB
External Photos OriginalExternal Photos2019-11-18PDF 168.1 KB
External PhotosExternal Photos2013-01-31PDF 167.6 KB
LabelID Label/Location Info2022-05-05PDF 163.8 KB
Label DetailsID Label/Location Info2013-01-31PDF 154.8 KB
TSUPTest Setup Photos2022-05-05PDF 411.7 KB
Test Report TNBTest Setup Photos2019-11-18PDF 508.7 KB
Test Setup PhotosTest Setup Photos2013-01-31PDF 300.8 KB
Test Report Part 90Test Report2022-05-05PDF 2.5 MB
Test ReportTest Report2013-01-31PDF 1.5 MB
C2PC Change Description LetterCover Letter(s)2022-05-05PDF 46.1 KB
Confidentiality LetterCover Letter(s)2022-05-05PDF 45.1 KB
LOA LetterCover Letter(s)2022-05-05PDF 40.7 KB
LOA Letter EMC to RepresentCover Letter(s)2022-05-05PDF 39.2 KB
Authorization LetterCover Letter(s)2019-11-18PDF 491.3 KB
Extended Frequency LetterCover Letter(s)2019-11-18PDF 505.7 KB
Permissive Change LetterCover Letter(s)2019-11-18PDF 398 KB
Authorization LetterCover Letter(s)2013-01-31PDF 140.6 KB
Confidential LetterCover Letter(s)2013-01-31PDF 163.3 KB
Justification LetterCover Letter(s)2013-01-31PDF 189.8 KB
Rad Haz AssessmentRF Exposure Info2013-01-31PDF 137.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 2.4 MB
Block Diagram Schematics Metadata onlySchematicsPDF 2.4 MB
Schematics Analog Daughter Board Metadata onlySchematicsPDF 658.4 KB
Schematics Baseband Metadata onlySchematicsPDF 1.1 MB
Schematics Isolator Board Metadata onlySchematicsPDF 592.9 KB
Schematics LED Board Metadata onlySchematicsPDF 415.2 KB
Schematics PA Board Metadata onlySchematicsPDF 617.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 219.8 KB
Parts List BOM Metadata onlyParts List/Tune Up InfoPDF 1.5 MB

Application Information

Application IDOIX4O/hCDhIWW/2DJ3kHTA==
Final Action Date2022-05-05
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0011306867
ModelRFI148
Frequency Range153.5-159.5 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionRFI-148 250 Paging Transmitter
Responsible PartyJohan Svean, Managing Director, johan.svean@stiengineering.com.au , 0061-8-9209-0900
Test FirmAndrew Cutler, EMC Technologies (NZ) Ltd, aucklab@emctech.co.nz , +64 9 360-0862
TCB Emailtei@timcoengr.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is rated conducted RF power output. Maximum rated conducted output power according to 90.205(s) is 250W. This device is intended for use in the occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet FCC limits. This transmitting device is NOT authorized for general population, consumer, or any other use. Users must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. EF: Class II Permissive Change: The original FCC grant was issued January 31, 2013. The change was the addition of an analog modulation input port and PCB, also a firmware change and additional emissions designators 11K2F2D, 11K2F3D, 11K2F3E, 8K00F2D, 6K00F3D and 6K00F3E.

Applications

Application IDDatePurpose
OIX4O/hCDhIWW/2DJ3kHTA==2022-05-05Class II permissive change or modification of presently authorized equipment
iXN9rN4/WC/KI9qsnv6T3w==2019-11-18Class II permissive change or modification of presently authorized equipment
F0jWcDRRAYnP5AtYwBIB5w==2013-01-31Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
150-174 MHz2502.5ppm11K0F1D9EF
150-174 MHz250.00000002.5000000000ppm11K0F1D90EF
150-174 MHz2501ppm4K86F1D9EF
153.5-159.5 MHz2500.219ppm11K2F2D9
153.5-159.5 MHz2500.219ppm11K2F3D9
153.5-159.5 MHz2500.219ppm11K2F3E9
153.5-159.5 MHz2500.219ppm6K00F2D9
153.5-159.5 MHz2500.219ppm6K00F3D9
153.5-159.5 MHz2500.219ppm6K00F3E9

Grants

TCB Grant - Application OIX4O/hCDhIWW/2DJ3kHTA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 05/05/2022

Application Dated: 05/05/2022
STI Engineering Pty Ltd
22 Boulder Road
Malaga
Western Australia, 6090
Australia
 
Attention: Johan Svean , Managing Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P5MRFI148
Name of Grantee:  STI Engineering Pty Ltd
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: RFI-148 250 Paging Transmitter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 153.5  -  159.5 250.0 0.219  PM 11K2F2D
90 153.5  -  159.5 250.0 0.219  PM 11K2F3D
90 153.5  -  159.5 250.0 0.219  PM 11K2F3E
90 153.5  -  159.5 250.0 0.219  PM 6K00F2D
90 153.5  -  159.5 250.0 0.219  PM 6K00F3D
90 153.5  -  159.5 250.0 0.219  PM 6K00F3E

Power listed is rated conducted RF power output. Maximum rated conducted output power according to 90.205(s) is 250W. This device is intended for use in the occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet FCC limits. This transmitting device is NOT authorized for general population, consumer, or any other use. Users must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

EF:

Class II Permissive Change: The original FCC grant was issued January 31, 2013. The change was the addition of an analog modulation input port and PCB, also a firmware change and additional emissions designators 11K2F2D, 11K2F3D, 11K2F3E, 8K00F2D, 6K00F3D and 6K00F3E.


EAS Grant - Application OIX4O/hCDhIWW/2DJ3kHTA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

STI Engineering Pty Ltd
22 Boulder Road Malaga
Western Australia, 6090
Australia
  Date of Grant: 05/05/2022

Application Dated: 05/05/2022
 
Attention: Johan Svean , Managing Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P5MRFI148
Name of Grantee:  STI Engineering Pty Ltd
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: RFI-148 250 Paging Transmitter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 153.5  -  159.5 250.0 0.219  PM 11K2F2D
90 153.5  -  159.5 250.0 0.219  PM 11K2F3D
90 153.5  -  159.5 250.0 0.219  PM 11K2F3E
90 153.5  -  159.5 250.0 0.219  PM 6K00F2D
90 153.5  -  159.5 250.0 0.219  PM 6K00F3D
90 153.5  -  159.5 250.0 0.219  PM 6K00F3E

Power listed is rated conducted RF power output. Maximum rated conducted output power according to 90.205(s) is 250W. This device is intended for use in the occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet FCC limits. This transmitting device is NOT authorized for general population, consumer, or any other use. Users must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

EF:

Class II Permissive Change: The original FCC grant was issued January 31, 2013. The change was the addition of an analog modulation input port and PCB, also a firmware change and additional emissions designators 11K2F2D, 11K2F3D, 11K2F3E, 8K00F2D, 6K00F3D and 6K00F3E.



TCB Grant - Application iXN9rN4/WC/KI9qsnv6T3w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/18/2019

Application Dated: 11/18/2019
STI Engineering Pty Ltd
22 Boulder Road
Malaga
Western Australia, 6090
Australia
 
Attention: Johan Svean , Managing Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P5MRFI148
Name of Grantee:  STI Engineering Pty Ltd
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: VHF PAGING TRANSMITTER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF 90 150.0  -  174.0 250.0 2.5  PM 11K0F1D
EF 90 150.0  -  174.0 250.0 1.0  PM 4K86F1D

The output power is variable from 20 W to 250 W. Output power is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. This device is intended for use in the occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet FCC limits. This transmitting device is NOT authorized for general population, consumer, or any other use.

This is a Class 2 permissive change application. The original FCC grant was issued January 31, 2013. The change was the addition of a 6.25 kHz mode. There were no hardware changes done to implement this change.

RF exposure compliance is addressed at the time of licensing. Users must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application iXN9rN4/WC/KI9qsnv6T3w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

STI Engineering Pty Ltd
22 Boulder Road Malaga
Western Australia, 6090
Australia
  Date of Grant: 11/18/2019

Application Dated: 11/18/2019
 
Attention: Johan Svean , Managing Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P5MRFI148
Name of Grantee:  STI Engineering Pty Ltd
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: VHF PAGING TRANSMITTER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF 90 150.0  -  174.0 250.0 2.5  PM 11K0F1D
EF 90 150.0  -  174.0 250.0 1.0  PM 4K86F1D

The output power is variable from 20 W to 250 W. Output power is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. This device is intended for use in the occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet FCC limits. This transmitting device is NOT authorized for general population, consumer, or any other use.

This is a Class 2 permissive change application. The original FCC grant was issued January 31, 2013. The change was the addition of a 6.25 kHz mode. There were no hardware changes done to implement this change.

RF exposure compliance is addressed at the time of licensing. Users must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application F0jWcDRRAYnP5AtYwBIB5w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 01/31/2013

Application Dated: 01/31/2013
STI Engineering Pty Ltd
22 Boulder Road
Malga
Western Australia, 6090
Australia
 
Attention: Matthew Spaapen , Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P5MRFI148
Name of Grantee:  STI Engineering Pty Ltd
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: VHF PAGING TRANSMITTER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF 90 150.0  -  174.0 250.0 2.5  PM 11K0F1D

Power listed is rated conducted RF power output. Maximum rated conducted output power according to 90.205(s) is 250W. This device is intended for use in the occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet FCC limits. This transmitting device is NOT authorized for general population, consumer, or any other use. Users must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application F0jWcDRRAYnP5AtYwBIB5w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

STI Engineering Pty Ltd
22 Boulder Road Malga
Western Australia, 6090
Australia
  Date of Grant: 01/31/2013

Application Dated: 01/31/2013
 
Attention: Matthew Spaapen , Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P5MRFI148
Name of Grantee:  STI Engineering Pty Ltd
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: VHF PAGING TRANSMITTER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF 90 150.0  -  174.0 250.0 2.5  PM 11K0F1D

Power listed is rated conducted RF power output. Maximum rated conducted output power according to 90.205(s) is 250W. This device is intended for use in the occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet FCC limits. This transmitting device is NOT authorized for general population, consumer, or any other use. Users must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

Mail To: