FCC ID P65ALRF800B
RFID Enterprise Reader
by Alien Technology, LLC
Grantee Code: P65 Product Code: ALRF800B
Latest application date: 2019-11-20
Device Images
FCC ID Device Details
| FCC ID | P65ALRF800B |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | P65 |
| Product Code | ALRF800B |
| Applicant Business | Alien Technology, LLC 🇺🇸 |
| Related Domains |  alientechnology.com |
| Equipment Class | RFID Enterprise Reader |
| Test Firm | MiCOM Labs |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2019-11-20 |
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2016-09-07 |
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2015-12-30 |
| 902.75-927.25 MHz | Original Equipment | 2015-12-10 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2020-05-18 | PDF 1.5 MB |
| Users Manual (Multiplexer) | Users Manual | 2020-05-18 | PDF 873.8 KB |
| User Manual | Users Manual | 2015-12-10 | PDF 477.2 KB |
| Internal Photos (Multiplexer) | Internal Photos | 2020-05-18 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2015-12-30 | PDF 1 MB |
| Internal Photos | Internal Photos | 2015-12-10 | PDF 1.2 MB |
| External Photos (Multiplexer) | External Photos | 2020-05-18 | PDF 3.2 MB |
| Antenna photos | External Photos | 2016-09-07 | PDF 343.1 KB |
| External photos/adapter photos | External Photos | 2016-09-07 | PDF 1.7 MB |
| Confidentiality Request | External Photos | 2015-12-30 | PDF 44.7 KB |
| External Photos | External Photos | 2015-12-10 | PDF 1,023.6 KB |
| Label and Location | ID Label/Location Info | 2019-11-20 | PDF 216.9 KB |
| Label and Location (Multiplexer) | ID Label/Location Info | 2019-11-20 | PDF 384.2 KB |
| Label Location/Info | ID Label/Location Info | 2015-12-10 | PDF 1.1 MB |
| Test Setup Photos | Test Setup Photos | 2020-05-18 | PDF 1.8 MB |
| Test setup photos | Test Setup Photos | 2016-09-07 | PDF 2.1 MB |
| Test Setup Photos | Test Setup Photos | 2015-12-30 | PDF 2.8 MB |
| Test Report | Test Report | 2019-11-20 | PDF 3.7 MB |
| Test Report | Test Report | 2016-09-07 | PDF 4 MB |
| Test Report | Test Report | 2015-12-30 | PDF 1.8 MB |
| Test Report | Test Report | 2015-12-10 | PDF 2.3 MB |
| Authorization Letter | Cover Letter(s) | 2019-11-20 | PDF 154.3 KB |
| C2PC request Letter | Cover Letter(s) | 2019-11-20 | PDF 143.3 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2019-11-20 | PDF 219.3 KB |
| Authorization letter | Cover Letter(s) | 2016-09-07 | PDF 47.1 KB |
| Cover Letter | Cover Letter(s) | 2016-09-07 | PDF 36 KB |
| Setup Guide | Cover Letter(s) | 2016-09-07 | PDF 518.2 KB |
| Authorization | Cover Letter(s) | 2015-12-30 | PDF 46.8 KB |
| Class II permissive change letter | Cover Letter(s) | 2015-12-30 | PDF 36.9 KB |
| Authorization | Cover Letter(s) | 2015-12-10 | PDF 475.8 KB |
| Confidentiality Request | Cover Letter(s) | 2015-12-10 | PDF 42.3 KB |
| RF Exposure (MPE) | RF Exposure Info | 2019-11-20 | PDF 256.5 KB |
| RF exposure info | RF Exposure Info | 2016-09-07 | PDF 31.8 KB |
| RF Exposure | RF Exposure Info | 2015-12-30 | PDF 31.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 87.1 KB | |
| Block Diagram (Multiplexer) Metadata only | Block Diagram | PDF 179.6 KB | |
| Schematics Metadata only | Schematics | PDF 777.7 KB | |
| Schematics (Multiplexer) Metadata only | Schematics | PDF 424.7 KB | |
| Operational Description Metadata only | Operational Description | PDF 96.4 KB | |
| Operational Description 1 (Multiplexer) Metadata only | Operational Description | PDF 308.5 KB | |
| Operational Description 2 (Multiplexer) Metadata only | Operational Description | PDF 301.5 KB | |
| BOM (Multiplexer) Metadata only | Parts List/Tune Up Info | PDF 187.8 KB | |
| Part Location (Multiplexer) Metadata only | Parts List/Tune Up Info | PDF 659.8 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 109.9 KB |
Application Information
| Application ID | EfyErEKLfyVX/iqgyKSXGA== |
|---|---|
| Final Action Date | 2019-11-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006324032 |
| Model | ALRF800B |
| Frequency Range | 902.75-927.25 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RFID Enterprise Reader |
| Responsible Party | John B Hattick, Dir HW Eng, jhattick@alientechnology.com , 4087823909 |
| Technical Contact | Gordon Hurst, MiCOM Labs Inc., gordon_hurst@micomlabs.com  , 9254620304 |
| Test Firm | Gordon Hurst, MiCOM Labs, gordon_hurst@micomlabs.com , 925-462-0304 |
| TCB Email | certification@micomlabs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 05/18/2020 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add Multiplexer System, ALX-2525 and ALX-2530, and add antenna options. Professional Installation Required. Power Output listed is Conducted as measured at the input to the antenna. The antennas used for this transmitter must be installed to provide a separation distance of at least 24 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| EfyErEKLfyVX/iqgyKSXGA== | 2019-11-20 | Class II permissive change or modification of presently authorized equipment |
| twx4M1ICep30gKP+vcYfqQ== | 2016-09-07 | Class II permissive change or modification of presently authorized equipment |
| 1MnrA7g6/LdxTGjE59gzWQ== | 2015-12-30 | Class II permissive change or modification of presently authorized equipment |
| zYoDlVlkZuFgdYG+PDTqvA== | 2015-12-10 | Original Equipment |
Grants
TCB Grant - Application zYoDlVlkZuFgdYG+PDTqvA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/10/2015 Application Dated: 12/10/2015 |
| Alien Technology, LLC |
| 845 Embedded Way |
| San Jose, CA 95138 |
| Attention: John Hattick , Dir HW Eng |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P65ALRF800B |
| Name of Grantee: | Alien Technology, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 902.75 - 927.25 | 0.986 |
| Professional Installation Required. Power Output listed is Conducted as measured at the input to the antenna. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application zYoDlVlkZuFgdYG+PDTqvA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Alien Technology, LLC 845 Embedded Way San Jose, CA 95138 United States |
Date of Grant: 12/10/2015 Application Dated: 12/10/2015 |
| Attention: John Hattick , Dir HW Eng |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P65ALRF800B |
| Name of Grantee: | Alien Technology, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 902.75 - 927.25 | 0.986 |
| Professional Installation Required. Power Output listed is Conducted as measured at the input to the antenna. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 09/07/2016 Application Dated: 09/07/2016 |
| Alien Technology, LLC |
| 845 Embedded Way |
| San Jose, CA 95138 |
| Attention: John Hattick , Dir HW Eng |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P65ALRF800B |
| Name of Grantee: | Alien Technology, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 902.75 - 927.25 | 0.986 |
| Class II Permissive Change. Professional Installation Required. Power Output listed is Conducted as measured at the input to the antenna. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application twx4M1ICep30gKP+vcYfqQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Alien Technology, LLC 845 Embedded Way San Jose, CA 95138 United States |
Date of Grant: 09/07/2016 Application Dated: 09/07/2016 |
| Attention: John Hattick , Dir HW Eng |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P65ALRF800B |
| Name of Grantee: | Alien Technology, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 902.75 - 927.25 | 0.986 |
| Class II Permissive Change. Professional Installation Required. Power Output listed is Conducted as measured at the input to the antenna. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 11/20/2019 Application Dated: 11/20/2019 |
| Alien Technology, LLC |
| 845 Embedded Way |
| San Jose, CA 95138 |
| Attention: John Hattick , Dir HW Eng |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P65ALRF800B |
| Name of Grantee: | Alien Technology, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Enterprise Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 902.75 - 927.25 | 0.986 |
| Class II Permissive Change to add Multiplexer System, ALX-2525 and ALX-2530, and add antenna options. Professional Installation Required. Power Output listed is Conducted as measured at the input to the antenna. The antennas used for this transmitter must be installed to provide a separation distance of at least 24 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application EfyErEKLfyVX/iqgyKSXGA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Alien Technology, LLC 845 Embedded Way San Jose, CA 95138 United States |
Date of Grant: 11/20/2019 Application Dated: 11/20/2019 |
| Attention: John Hattick , Dir HW Eng |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P65ALRF800B |
| Name of Grantee: | Alien Technology, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Enterprise Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 902.75 - 927.25 | 0.986 |
| Class II Permissive Change to add Multiplexer System, ALX-2525 and ALX-2530, and add antenna options. Professional Installation Required. Power Output listed is Conducted as measured at the input to the antenna. The antennas used for this transmitter must be installed to provide a separation distance of at least 24 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/30/2015 Application Dated: 12/30/2015 |
| Alien Technology, LLC |
| 845 Embedded Way |
| San Jose, CA 95138 |
| Attention: John Hattick , Dir HW Eng |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P65ALRF800B |
| Name of Grantee: | Alien Technology, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 902.75 - 927.25 | 0.986 |
| Class II Permissive Change. Professional Installation Required. Power Output listed is Conducted as measured at the input to the antenna. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multitransmitter product procedures. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application 1MnrA7g6/LdxTGjE59gzWQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Alien Technology, LLC 845 Embedded Way San Jose, CA 95138 United States |
Date of Grant: 12/30/2015 Application Dated: 12/30/2015 |
| Attention: John Hattick , Dir HW Eng |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P65ALRF800B |
| Name of Grantee: | Alien Technology, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 902.75 - 927.25 | 0.986 |
| Class II Permissive Change. Professional Installation Required. Power Output listed is Conducted as measured at the input to the antenna. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multitransmitter product procedures. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |