TCB Grant - Application VASGoq7OXMcMXBG/glcuBg==
This application does not exist.
EAS Grant - Application VASGoq7OXMcMXBG/glcuBg==
This application currently is not in final status.
TCB Grant - Application pM3xW3oeuGoC6RLdLSbZIQ==
| TCB |
GRANT OF EQUIPMENT
AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
|
Date of Grant: 03/29/2013
Application Dated: 03/29/2013
|
| Shenzhen HQT Science&Technology Co., Ltd. |
| 5/F, East of Building M-8, Central Zone, |
| Hi-Tech Industrial Park, Nanshan District |
Shenzhen, 518052
China |
| |
| Attention: Qian Chen |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
P6NTH-8000V |
|
|
| Name of Grantee: |
Shenzhen HQT Science&Technology Co., Ltd. |
|
|
| Equipment Class: |
Licensed Non-Broadcast Transmitter Held to Face |
| Notes: |
Two-way Radio |
| Grant Notes
| FCC Rule Parts
| Frequency
Range (MHZ)
| Output
Watts
| Frequency
Tolerance
| Emission
Designator
|
| BF EF |
90 |
136.0
-
174.0
|
4.518
|
0.568
PM
|
10K1F3E
|
| Certification is approved pursuant to FCC Order 13-431.
Power output listed is conducted. The measured ERP is 2 Watts described in this filing. This device must be restricted to work-related operations only in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. This transmitter may operate with the antenna(s) documented in this filing in Push-to-Talk and body-worn configurations. RF exposure compliance is limited to the specific belt-clip and accessory configurations as documented in this filing and the separation distance between user and the device or its antenna shall be at least 2.5 cm. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled Exposure limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. The highest reported SAR values for Face held and body-worn accessory are 1.91 W/Kg and 0.30 W/Kg respectively when operating at 50% duty cycle. |
| BF: |
The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed. |
| EF: |
This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
EAS Grant - Application pM3xW3oeuGoC6RLdLSbZIQ==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT
AUTHORIZATION |
COPY |
| Certification |
Shenzhen HQT Science&Technology Co., Ltd.
5/F, East of Building M-8, Central Zone,
Hi-Tech Industrial Park, Nanshan District
Shenzhen, 518052
China
|
|
Date of Grant: 03/29/2013
Application Dated: 03/29/2013
|
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
P6NTH-8000V |
|
|
| Name of Grantee: |
Shenzhen HQT Science&Technology Co., Ltd. |
|
|
| Equipment Class: |
Licensed Non-Broadcast Transmitter Held to Face |
| Notes: |
Two-way Radio |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency
Range (MHZ)
| Output
Watts
| Frequency
Tolerance
| Emission
Designator
|
| BF EF |
90 |
136.0
-
174.0
|
4.518
|
0.568
PM
|
10K1F3E
|
| Certification is approved pursuant to FCC Order 13-431.
Power output listed is conducted. The measured ERP is 2 Watts described in this filing. This device must be restricted to work-related operations only in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. This transmitter may operate with the antenna(s) documented in this filing in Push-to-Talk and body-worn configurations. RF exposure compliance is limited to the specific belt-clip and accessory configurations as documented in this filing and the separation distance between user and the device or its antenna shall be at least 2.5 cm. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled Exposure limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. The highest reported SAR values for Face held and body-worn accessory are 1.91 W/Kg and 0.30 W/Kg respectively when operating at 50% duty cycle. |
| BF: |
The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed. |
| EF: |
This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
, 86-0755-86028800
, 08675533320018