FCC ID P7G-DS1

WLAN 2x2 MIMO 802.11a/n/ac

by Covidien llc.

Grantee Code: P7G   Product Code: DS1
Latest application date: 2020-08-20

FCC ID Device Details

FCC IDP7G-DS1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeP7G
Product CodeDS1
Applicant BusinessCovidien llc. 🇺🇸
Related Domains medtronic.com
Equipment ClassWLAN 2x2 MIMO 802.11a/n/ac
Test FirmUL LLC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-08-20
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: VOB-P3310 Grant Date: 01/19/20172020-06-24
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: VOB-P3310 Grant Date: 01/19/20172020-06-24
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: VOB-P3310 Grant Date: 01/19/20172020-06-24

Exhibits

DocumentTypeAvailableFile
External Photo HostExternal Photos2020-08-20PDF 1.4 MB
External PhotoExternal Photos2020-06-24PDF 651.6 KB
Label InfoID Label/Location Info2020-08-20PDF 184.8 KB
Label InfoID Label/Location Info2020-06-24PDF 121.8 KB
Test ReportTest Report2020-08-20PDF 2.1 MB
Test Set UpTest Report2020-08-20PDF 1.2 MB
Authorisation LetterCover Letter(s)2020-08-20PDF 171.2 KB
Confidentiality RequestCover Letter(s)2020-08-20PDF 137.4 KB
Permissive Change RequestCover Letter(s)2020-08-20PDF 323.9 KB
New Equipment Certification Holder LetterCover Letter(s)2020-06-24PDF 123.4 KB
Original Equipment Certification Holder LetterCover Letter(s)2020-06-24PDF 202 KB
Antenna Spec Metadata onlyOperational DescriptionPDF 1.1 MB

Application Information

Application IDT3PcN8J8fg5cepYJqFeiIQ==
Final Action Date2020-08-20
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0029543063
ModelDS1
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWLAN 2x2 MIMO 802.11a/n/ac
Responsible PartyBarbara Maestas, Program Manager, RF, Barbara.a.maestas@medtronic.com , 303-530-6339
Technical ContactPetros Giataganas, Digital Circuitry Ltd, petros@digitalsurgery.com , 00447 74317 8309
Non-Technical ContactBarbara Maestas, Medtronic, Barbara.a.maestas@medtronic.com , 303 530 6339
Test FirmRick Titus, UL LLC, rick.a.titus@ul.com , 847-272-8800
TCB Emailcertification@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. Class II Permissive Change for a Limited Modular Approval for use in Grantee owned host product as detailed in this filing. Operation is U-NII-1, 20MHz operation only with a changed antenna type. The module cannot be sold to third parties or the general public in this configuration.

Applications

Application IDDatePurpose
T3PcN8J8fg5cepYJqFeiIQ==2020-08-20Class II permissive change or modification of presently authorized equipment
tW0taGGVw5YjvzSRebsFbQ==2020-06-24Change in identification of presently authorized equipment. Original FCC ID: VOB-P3310 Grant Date: 01/19/2017
OeA5Pd3xliomjU+87LB/hw==2020-06-24Change in identification of presently authorized equipment. Original FCC ID: VOB-P3310 Grant Date: 01/19/2017
NayADR6y/5Bn98fHCwZ7zg==2020-06-24Change in identification of presently authorized equipment. Original FCC ID: VOB-P3310 Grant Date: 01/19/2017

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.003415CCC
2402-2480 MHz0.007300015CCC
2412-2472 MHz0.069815CCC, MO
5180-5240 MHz0.039915E38, CC, MO
5260-5320 MHz0.083215E38, CC, MO, ND
5500-5700 MHz0.085315E38, CC, MO, ND
5745-5825 MHz0.083415E38, CC, MO

Grants

TCB Grant - Application tW0taGGVw5YjvzSRebsFbQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL International (UK) Ltd
Unit 1 - 3 Horizon Kingsland Business Park Wade Road
Basingstoke, RG24 8AH
United Kingdom
Date of Grant: 06/24/2020

Application Dated: 06/24/2020
Covidien llc.
15 Hampshire Street
Mansfield, MA 02048
 
Attention: Barbara Maestas , Program Manager, RF

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P7G-DS1
Name of Grantee:  Covidien llc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.0399  
38 CC MO ND 15E 5260.0  -  5320.0 0.0832  
38 CC MO ND 15E 5500.0  -  5700.0 0.0853  
38 CC MO 15E 5745.0  -  5825.0 0.0834  

Output power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application tW0taGGVw5YjvzSRebsFbQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Covidien llc.
15 Hampshire Street
Mansfield, MA 02048
United States
  Date of Grant: 06/24/2020

Application Dated: 06/24/2020
 
Attention: Barbara Maestas , Program Manager, RF

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P7G-DS1
Name of Grantee:  Covidien llc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.0399  
38 CC MO ND 15E 5260.0  -  5320.0 0.0832  
38 CC MO ND 15E 5500.0  -  5700.0 0.0853  
38 CC MO 15E 5745.0  -  5825.0 0.0834  

Output power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application T3PcN8J8fg5cepYJqFeiIQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL International (UK) Ltd
Unit 1 - 3 Horizon Kingsland Business Park Wade Road
Basingstoke, RG24 8AH
United Kingdom
Date of Grant: 08/20/2020

Application Dated: 08/20/2020
Covidien llc.
15 Hampshire Street
Mansfield, MA 02048
 
Attention: Barbara Maestas , Program Manager, RF

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P7G-DS1
Name of Grantee:  Covidien llc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN 2x2 MIMO 802.11a/n/ac
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.0399  
38 CC MO ND 15E 5260.0  -  5320.0 0.0832  
38 CC MO ND 15E 5500.0  -  5700.0 0.0853  
38 CC MO 15E 5745.0  -  5825.0 0.0834  

Output power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

Class II Permissive Change for a Limited Modular Approval for use in Grantee owned host product as detailed in this filing. Operation is U-NII-1, 20MHz operation only with a changed antenna type. The module cannot be sold to third parties or the general public in this configuration.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application T3PcN8J8fg5cepYJqFeiIQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Covidien llc.
15 Hampshire Street
Mansfield, MA 02048
United States
  Date of Grant: 08/20/2020

Application Dated: 08/20/2020
 
Attention: Barbara Maestas , Program Manager, RF

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P7G-DS1
Name of Grantee:  Covidien llc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN 2x2 MIMO 802.11a/n/ac
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.0399  
38 CC MO ND 15E 5260.0  -  5320.0 0.0832  
38 CC MO ND 15E 5500.0  -  5700.0 0.0853  
38 CC MO 15E 5745.0  -  5825.0 0.0834  

Output power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

Class II Permissive Change for a Limited Modular Approval for use in Grantee owned host product as detailed in this filing. Operation is U-NII-1, 20MHz operation only with a changed antenna type. The module cannot be sold to third parties or the general public in this configuration.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application OeA5Pd3xliomjU+87LB/hw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL International (UK) Ltd
Unit 1 - 3 Horizon Kingsland Business Park Wade Road
Basingstoke, RG24 8AH
United Kingdom
Date of Grant: 06/24/2020

Application Dated: 06/24/2020
Covidien llc.
15 Hampshire Street
Mansfield, MA 02048
 
Attention: Barbara Maestas , Program Manager, RF

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P7G-DS1
Name of Grantee:  Covidien llc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0073  

Power output listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application OeA5Pd3xliomjU+87LB/hw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Covidien llc.
15 Hampshire Street
Mansfield, MA 02048
United States
  Date of Grant: 06/24/2020

Application Dated: 06/24/2020
 
Attention: Barbara Maestas , Program Manager, RF

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P7G-DS1
Name of Grantee:  Covidien llc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0073  

Power output listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application NayADR6y/5Bn98fHCwZ7zg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL International (UK) Ltd
Unit 1 - 3 Horizon Kingsland Business Park Wade Road
Basingstoke, RG24 8AH
United Kingdom
Date of Grant: 06/24/2020

Application Dated: 06/24/2020
Covidien llc.
15 Hampshire Street
Mansfield, MA 02048
 
Attention: Barbara Maestas , Program Manager, RF

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P7G-DS1
Name of Grantee:  Covidien llc.
Equipment Class: Digital Transmission System
Notes: WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0034  
CC MO 15C 2412.0  -  2472.0 0.0698  

Power output listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20 MHz bandwidth. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application NayADR6y/5Bn98fHCwZ7zg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Covidien llc.
15 Hampshire Street
Mansfield, MA 02048
United States
  Date of Grant: 06/24/2020

Application Dated: 06/24/2020
 
Attention: Barbara Maestas , Program Manager, RF

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P7G-DS1
Name of Grantee:  Covidien llc.
Equipment Class: Digital Transmission System
Notes: WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0034  
CC MO 15C 2412.0  -  2472.0 0.0698  

Power output listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20 MHz bandwidth. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: