FCC ID P9J-2411
2.4 GHz 802.11n High Power Mini-PCI Card
by ABB, Inc.
Grantee Code: P9J Product Code: 2411
Latest application date: 2010-06-10
FCC ID Device Details
| FCC ID | P9J-2411 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | P9J |
| Product Code | 2411 |
| Applicant Business | ABB, Inc. 🇺🇸 |
| Related Domains |  tropos.com |
| Equipment Class | 2.4 GHz 802.11n High Power Mini-PCI Card |
| Test Firm | Compliance Certification Services |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2010-06-10 |
| 2412-2462 MHz | Original Equipment | 2008-09-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2008-09-15 | PDF 1.1 MB |
| External Photos | External Photos | 2008-09-15 | PDF 1.1 MB |
| FCC ID Label 1 | ID Label/Location Info | 2008-09-15 | PDF 428.7 KB |
| FCC ID Label 2 | ID Label/Location Info | 2008-09-15 | PDF 60.9 KB |
| Setup Photos | Test Setup Photos | 2008-09-15 | PDF 430.7 KB |
| Report | Test Report | 2008-09-15 | PDF 2.6 MB |
| C2PC letter | Cover Letter(s) | 2010-06-10 | PDF 76.2 KB |
| Request for confidentiality | Cover Letter(s) | 2010-06-10 | PDF 78 KB |
| Request for superseding | Cover Letter(s) | 2010-06-10 | PDF 96.8 KB |
| Authorization Letter | Cover Letter(s) | 2008-09-15 | PDF 62.9 KB |
| Modular Approval Letter | Cover Letter(s) | 2008-09-15 | PDF 21.2 KB |
| Request for Confidentiality | Cover Letter(s) | 2008-09-15 | PDF 20.1 KB |
| Updated RF exposure Info | RF Exposure Info | 2010-06-10 | PDF 120 KB |
| RF Exposure | RF Exposure Info | 2008-09-15 | PDF 37.2 KB |
Application Information
| Application ID | X0DMClFNLzPMxLo1gPRarQ== |
|---|---|
| Final Action Date | 2010-06-10 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019436906 |
| Model | -2411 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 2.4 GHz 802.11n High Power Mini-PCI Card |
| Responsible Party | Andrew Balaschak, Director, Product Management, andy.balaschak@tropos.com , (408) 470-7387 |
| Test Firm | Barbara Judge, Compliance Certification Services, barbara.judge@ccsemc.com  , 510-771-1104 |
| TCB Email | mike.kuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II Permissive Change to alternate a mobile configuration and co-locate with two transmitters with a separation distance of at least 57cm from all persons as documented in this application. Limited Single Modular Approval. Power output listed is conducted. Professional installation is required. This device may be installed only with antennas described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| X0DMClFNLzPMxLo1gPRarQ== | 2010-06-10 | Class II permissive change or modification of presently authorized equipment |
| A3jmYGENNqhYVdnytI5+zA== | 2008-09-15 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.7160000 | 15C |
Grants
TCB Grant - Application X0DMClFNLzPMxLo1gPRarQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/10/2010 Application Dated: 06/10/2010 |
| Tropos Networks, Inc. |
| 555 Del Ray Avenue |
| Sunnyvale, CA 94085 |
| Attention: Andrew Balaschak , Director, Product Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P9J-2411 |
| Name of Grantee: | Tropos Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4 GHz 802.11n High Power Mini-PCI Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.716 |
| Class II Permissive Change to alternate a mobile configuration and co-locate with two transmitters with a separation distance of at least 57cm from all persons as documented in this application. Limited Single Modular Approval. Power output listed is conducted. Professional installation is required. This device may be installed only with antennas described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application X0DMClFNLzPMxLo1gPRarQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tropos Networks, Inc. 555 Del Ray Avenue Sunnyvale, CA 94085 United States |
Date of Grant: 06/10/2010 Application Dated: 06/10/2010 |
| Attention: Andrew Balaschak , Director, Product Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P9J-2411 |
| Name of Grantee: | Tropos Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4 GHz 802.11n High Power Mini-PCI Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.716 |
| Class II Permissive Change to alternate a mobile configuration and co-locate with two transmitters with a separation distance of at least 57cm from all persons as documented in this application. Limited Single Modular Approval. Power output listed is conducted. Professional installation is required. This device may be installed only with antennas described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/15/2008 Application Dated: 09/10/2008 |
| Tropos Networks, Inc. |
| 555 Del Ray Avenue |
| Sunnyvale, CA 94085 |
| Attention: Andrew Balaschak , Director, Product Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P9J-2411 |
| Name of Grantee: | Tropos Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4 GHz 802.11n High Power Mini-PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.716 |
| Limited Single Modular Approval. Power output listed is conducted. Professional installation is required. This device may be installed only with antennas described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| Single Modular |
EAS Grant - Application A3jmYGENNqhYVdnytI5+zA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tropos Networks, Inc. 555 Del Ray Avenue Sunnyvale, CA 94085 United States |
Date of Grant: 09/15/2008 Application Dated: 09/10/2008 |
| Attention: Andrew Balaschak , Director, Product Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P9J-2411 |
| Name of Grantee: | Tropos Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4 GHz 802.11n High Power Mini-PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.716 |
| Limited Single Modular Approval. Power output listed is conducted. Professional installation is required. This device may be installed only with antennas described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| Single Modular |
| Mail To: |