FCC ID P9J-51102100
Wi-Fi Cellular Basestation
by ABB Enterprise Software Inc.
Grantee Code: P9J Product Code: 51102100
Latest application date: 2004-04-22
FCC ID Device Details
| FCC ID | P9J-51102100 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | P9J |
| Product Code | 51102100 |
| Applicant Business | ABB Enterprise Software Inc. 🇺🇸 |
| Related Domains |  hitachi-powergrids.com |
| Equipment Class | Wi-Fi Cellular Basestation |
| Test Firm | Compliance Certification Services Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-04-22 |
| 2412-2462 MHz | Original Equipment | 2003-08-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Installation guide addendum | Users Manual | 2004-04-22 | PDF 148.1 KB |
| Revised User Manual | Users Manual | 2003-08-28 | PDF 2 MB |
| User Manual Metadata only | Users Manual | 2003-08-28 | PDF 902.2 KB |
| Internal Photos for power supply | Internal Photos | 2004-04-22 | PDF 745 KB |
| Internal Photos | Internal Photos | 2003-08-28 | PDF 1 MB |
| External Photos | External Photos | 2003-08-28 | PDF 425.8 KB |
| FCC ID label format and location | ID Label/Location Info | 2003-08-28 | PDF 60.5 KB |
| Setup Photos | Test Setup Photos | 2004-04-22 | PDF 429 KB |
| Test Setup Photos | Test Setup Photos | 2003-08-28 | PDF 489.7 KB |
| Test Report | Test Report | 2004-04-22 | PDF 1.5 MB |
| Test Report | Test Report | 2003-08-28 | PDF 2.5 MB |
| 5110 datasheet | Cover Letter(s) | 2004-04-22 | PDF 993.8 KB |
| Authorization Letter | Cover Letter(s) | 2004-04-22 | PDF 1.5 MB |
| Class II Permissive Change Letter | Cover Letter(s) | 2004-04-22 | PDF 50.6 KB |
| RT 32904 | Cover Letter(s) | 2004-04-22 | PDF 7.1 KB |
| Request for Confidentiality | Cover Letter(s) | 2004-04-22 | PDF 1.2 MB |
| Tropos Model Numbers 03052004 | Cover Letter(s) | 2004-04-22 | PDF 88.1 KB |
| Antenna Pattern | Cover Letter(s) | 2003-08-28 | PDF 136.6 KB |
| Request for confidentiality letter | Cover Letter(s) | 2003-08-28 | PDF 1.4 MB |
| TCB Q and A | Cover Letter(s) | 2003-08-28 | PDF 5.9 KB |
| Antenna Information 1 | Parts List/Tune Up Info | 2004-04-22 | PDF 165.3 KB |
| Antenna Information 2 | Parts List/Tune Up Info | 2004-04-22 | PDF 15.2 KB |
| Antenna Information 3 | Parts List/Tune Up Info | 2004-04-22 | PDF 193.5 KB |
| C Approved Antenna Configurations revised for fcc | Parts List/Tune Up Info | 2004-04-22 | PDF 102.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 29.9 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 29.3 KB | |
| Schematic Diagram AMP Metadata only | Schematics | PDF 191 KB | |
| Schematic Diagram RF Metadata only | Schematics | PDF 96.9 KB | |
| Technical Description Metadata only | Operational Description | PDF 59.4 KB | |
| Theory of Operation Metadata only | Operational Description | PDF 106.6 KB | |
| Theory of operation Metadata only | Operational Description | PDF 52 KB |
Application Information
| Application ID | jLNM0Ql6SKMwENqfbiXN6w== |
|---|---|
| Final Action Date | 2004-04-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0021871066 |
| Model | 51102100 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wi-Fi Cellular Basestation |
| Responsible Party | Tore Gillbrand, VP, Product Management, tore.gillbrand@hitachi-powergrids.com , 4087708566 |
| Agent | Mike Mike Mike, Compliance Certification Services, mheckrotte@ccsemc.com  , 408-463-0885 |
| Test Firm | Steve Cheng, Compliance Certification Services Inc, scheng@ccsemc.com , 408-463-0885 |
| TCB Email | mkuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change filing. Output power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. When the external antenna is used, professional installation is required and only Omni-directional antenna with max. 12dBi gain, Yagi antenna with 14dBi gain, Patch antenna with 17dBi are authorized. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| jLNM0Ql6SKMwENqfbiXN6w== | 2004-04-22 | Class II permissive change or modification of presently authorized equipment |
| bZAv0Xf6u/YLTBFwB4Hzpg== | 2003-08-28 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application jLNM0Ql6SKMwENqfbiXN6w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/22/2004 Application Dated: 04/22/2004 |
| ABB Enterprise Software Inc. |
| 3055 Orchard Drive |
| San Jose, CA 95134 |
| Attention: Tore Gillbrand , VP, Product Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P9J-51102100 |
| Name of Grantee: | ABB Enterprise Software Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi Cellular Basestation |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CE | 15C | 2412.0 - 2462.0 | 0.713 |
| Class II permissive change filing. Output power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. When the external antenna is used, professional installation is required and only Omni-directional antenna with max. 12dBi gain, Yagi antenna with 14dBi gain, Patch antenna with 17dBi are authorized. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.
|
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application jLNM0Ql6SKMwENqfbiXN6w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ABB Enterprise Software Inc. 3055 Orchard Drive San Jose, CA 95134 United States |
Date of Grant: 04/22/2004 Application Dated: 04/22/2004 |
| Attention: Tore Gillbrand , VP, Product Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P9J-51102100 |
| Name of Grantee: | ABB Enterprise Software Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi Cellular Basestation |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CE | 15C | 2412.0 - 2462.0 | 0.713 |
| Class II permissive change filing. Output power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. When the external antenna is used, professional installation is required and only Omni-directional antenna with max. 12dBi gain, Yagi antenna with 14dBi gain, Patch antenna with 17dBi are authorized. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.
|
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/28/2003 Application Dated: 08/28/2003 |
| ABB Enterprise Software Inc. |
| 3055 Orchard Drive |
| San Jose, CA 95134 |
| Attention: Tore Gillbrand , VP, Product Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P9J-51102100 |
| Name of Grantee: | ABB Enterprise Software Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Outdoor Wi-Fi Cell |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.713 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. When the external antenna is used, professional installation is required and only Omni-directional antenna with max. 7.4dBi antenna gain is authorized. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application bZAv0Xf6u/YLTBFwB4Hzpg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ABB Enterprise Software Inc. 3055 Orchard Drive San Jose, CA 95134 United States |
Date of Grant: 08/28/2003 Application Dated: 08/28/2003 |
| Attention: Tore Gillbrand , VP, Product Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P9J-51102100 |
| Name of Grantee: | ABB Enterprise Software Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Outdoor Wi-Fi Cell |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.713 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. When the external antenna is used, professional installation is required and only Omni-directional antenna with max. 7.4dBi antenna gain is authorized. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |