FCC ID P9JWMR530-01-00BC
802.11b Wireless Access Point
by ABB Enterprise Software Inc.
Grantee Code: P9J Product Code: WMR5300100BC
Latest application date: 2002-08-13
FCC ID Device Details
| FCC ID | P9JWMR530-01-00BC |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | P9J |
| Product Code | WMR5300100BC |
| Applicant Business | ABB Enterprise Software Inc. 🇺🇸 |
| Related Domains |  hitachi-powergrids.com |
| Equipment Class | 802.11b Wireless Access Point |
| Test Firm | Compliance Certification Services Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2002-08-13 |
| 2412-2462 MHz | Original Equipment | 2002-05-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Revised user manual | Users Manual | 2002-08-13 | PDF 358 KB |
| User Manual | Users Manual | 2002-05-22 | PDF 3.1 MB |
| Internal Photos | Internal Photos | 2002-05-22 | PDF 2.2 MB |
| External Photos | External Photos | 2002-05-22 | PDF 1 MB |
| FCC ID label format and location | ID Label/Location Info | 2002-05-22 | PDF 50 KB |
| Test Setup Photos | Test Setup Photos | 2002-08-13 | PDF 498.6 KB |
| Test setup Photos | Test Setup Photos | 2002-05-22 | PDF 598.1 KB |
| Test Report | Test Report | 2002-08-13 | PDF 1.4 MB |
| Test Report 1 of 2 | Test Report | 2002-05-22 | PDF 2 MB |
| Test Report 2 of 2 | Test Report | 2002-05-22 | PDF 3.7 MB |
| Class II permissive change letter | Cover Letter(s) | 2002-08-13 | PDF 20.6 KB |
| Request for confidentiality letter | Cover Letter(s) | 2002-08-13 | PDF 59.3 KB |
| Request for confidentiaity letter | jpeg | 2002-05-22 | PDF 408.8 KB |
| TCB Q and A | Cover Letter(s) | 2002-05-22 | PDF 2.5 KB |
| MPE evaluation | RF Exposure Info | 2002-05-22 | PDF 5.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 45.3 KB | |
| Schematic diagram Metadata only | Schematics | PDF 2.1 MB | |
| Technical Description Metadata only | Operational Description | PDF 38.3 KB | |
| Theory of operation Metadata only | Operational Description | PDF 36.8 KB |
Application Information
| Application ID | ZCcyLxN0RAm//JszQkPz8A== |
|---|---|
| Final Action Date | 2002-08-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0021871066 |
| Model | WMR530-01-00BC |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 802.11b Wireless Access Point |
| Responsible Party | Tore Gillbrand, VP, Product Management, tore.gillbrand@hitachi-powergrids.com , 4087708566 |
| Agent | Steve Steve Steve, Compliance Certification Services, scheng@ccsemc.com  , 408-463-0885 |
| Test Firm | Steve Cheng, Compliance Certification Services Inc, scheng@ccsemc.com , 408-463-0885 |
| TCB Email | mkuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Included 802.3af compliant P.O.E. ( Power Over Ethernet ) option in this Class II permissive change filing. Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ZCcyLxN0RAm//JszQkPz8A== | 2002-08-13 | Class II permissive change or modification of presently authorized equipment |
| Uxsa7DvD+mMhmbCPlyK6xw== | 2002-05-22 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ZCcyLxN0RAm//JszQkPz8A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/13/2002 Application Dated: 08/13/2002 |
| ABB Enterprise Software Inc. |
| 3055 Orchard Drive |
| San Jose, CA 95134 |
| Attention: Tore Gillbrand , VP, Product Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P9JWMR530-01-00BC |
| Name of Grantee: | ABB Enterprise Software Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11b Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2412.0 - 2462.0 | 0.0798 |
| Included 802.3af compliant P.O.E. ( Power Over Ethernet ) option in this Class II permissive change filing. Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application ZCcyLxN0RAm//JszQkPz8A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ABB Enterprise Software Inc. 3055 Orchard Drive San Jose, CA 95134 United States |
Date of Grant: 08/13/2002 Application Dated: 08/13/2002 |
| Attention: Tore Gillbrand , VP, Product Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P9JWMR530-01-00BC |
| Name of Grantee: | ABB Enterprise Software Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11b Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2412.0 - 2462.0 | 0.0798 |
| Included 802.3af compliant P.O.E. ( Power Over Ethernet ) option in this Class II permissive change filing. Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/22/2002 Application Dated: 05/22/2002 |
| Tropos Networks, Inc. |
| 555 Del Ray Avenue |
| Sunnyvale, CA 94085 |
| Attention: Andrew Balaschak , Director, Product Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P9JWMR530-01-00BC |
| Name of Grantee: | Tropos Networks, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11b Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 28 | 15C | 2412.0 - 2462.0 | 0.0798 |
| Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
| 28: | An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold. |
EAS Grant - Application Uxsa7DvD+mMhmbCPlyK6xw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tropos Networks, Inc. 555 Del Ray Avenue Sunnyvale, CA 94085 United States |
Date of Grant: 05/22/2002 Application Dated: 05/22/2002 |
| Attention: Andrew Balaschak , Director, Product Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | P9JWMR530-01-00BC |
| Name of Grantee: | Tropos Networks, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11b Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 28 | 15C | 2412.0 - 2462.0 | 0.0798 |
| Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
| 28: | An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold. |
| Mail To: |