FCC ID PBJV284-PLUS-A
Subscriber WMU
by Vyyo
Grantee Code: PBJ Product Code: V284PLUSA
Latest application date: 2006-06-13
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 776.075-776.925 MHz | Class II permissive change or modification of presently authorized equipment | 2006-06-13 |
| 776.075-776.925 MHz | Class II permissive change or modification of presently authorized equipment | 2006-05-15 |
| 776.075-776.925 MHz | Original Equipment | 2006-04-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Installation | Users Manual | 2006-06-13 | PDF 1.1 MB |
| User Manual | Users Manual | 2006-06-13 | PDF 2.4 MB |
| Users Manual Revised | Users Manual | 2006-04-11 | PDF 133.5 KB |
| Users Manual Revised for RT 28802 | Users Manual | 2006-04-11 | PDF 133.4 KB |
| Internal Photos | Internal Photos | 2006-06-13 | PDF 383.1 KB |
| Internal Photos | Internal Photos | 2006-04-11 | PDF 2.2 MB |
| External Photos | External Photos | 2006-06-13 | PDF 131.9 KB |
| External Photos | External Photos | 2006-04-11 | PDF 49.1 KB |
| FCC ID Label | ID Label/Location Info | 2006-06-13 | PDF 65.8 KB |
| Label Information | ID Label/Location Info | 2006-04-11 | PDF 18.7 KB |
| Block Diagram | Block Diagram | 2006-06-13 | PDF 23.7 KB |
| Block Diagram | Block Diagram | 2006-04-11 | PDF 19.1 KB |
| Operational Description | Operational Description | 2006-06-13 | PDF 637.6 KB |
| Test Photos | Test Setup Photos | 2006-04-11 | PDF 136.4 KB |
| Test Report Revised for RT 28802 | Test Setup Photos | 2006-04-11 | PDF 1.6 MB |
| Test Report | Test Report | 2006-06-13 | PDF 919.8 KB |
| test report for 200kHz 300kHz 400kHz | Test Report | 2006-05-15 | PDF 1.2 MB |
| Test Report | Test Report | 2006-04-11 | PDF 1.5 MB |
| Test Report Revised for RT29559 | Test Report | 2006-04-11 | PDF 1.8 MB |
| Authorization Letter | Cover Letter(s) | 2006-06-13 | PDF 49.5 KB |
| Cover Letter | Cover Letter(s) | 2006-06-13 | PDF 76.5 KB |
| TCB Q and A | Cover Letter(s) | 2006-06-13 | PDF 19.3 KB |
| description of class 2 permissive change | Cover Letter(s) | 2006-05-15 | PDF 94.3 KB |
| Comments | Cover Letter(s) | 2006-04-11 | PDF 54.3 KB |
| Confidentiality Letter | Cover Letter(s) | 2006-04-11 | PDF 13.4 KB |
| Response | Cover Letter(s) | 2006-04-11 | PDF 9.5 KB |
| Response to RT 28802 | Cover Letter(s) | 2006-04-11 | PDF 65.4 KB |
| Tune Up Procedure | Parts List/Tune Up Info | 2006-04-11 | PDF 5.7 KB |
| Schematics Metadata only | Schematics | PDF 136.4 KB | |
| Circuit Description Metadata only | Operational Description | PDF 9.1 KB | |
| Operational Description Metadata only | Operational Description | PDF 122.1 KB | |
| Operational Description Revised for RT 28802 Metadata only | Operational Description | PDF 121.9 KB | |
| RF Specifications Revised Metadata only | Operational Description | PDF 11.9 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 8.1 KB |
Application Information
| Application ID | lpbbL+lYjvGIKA28WCcxBA== |
|---|---|
| Final Action Date | 2006-06-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004058624 |
| Model | V284-PLUS-A |
| Frequency Range | 776.075-776.925 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | Subscriber WMU |
| Responsible Party | Dr. Mike Ritter, VP Marketing, mritter@vyyo.com |
| Agent | Tom Tom Tom, T.N. Cokenias Consulting, tom@tncokenias.org |
| TCB Email | mike.kuo@ccsemc.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is RMS Conducted. The antenna(s) used for this transmitter must be fixed mounted on outdoor permanent structures with a separation distance of at least 20 cm from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 0.575 W and the peak radiated output power must not exceed 12.9 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| lpbbL+lYjvGIKA28WCcxBA== | 2006-06-13 | Class II permissive change or modification of presently authorized equipment |
| evv0lyHNITYmXb0pfYAIiw== | 2006-05-15 | Class II permissive change or modification of presently authorized equipment |
| uOcyo9yo0ySwcQo+03R6aA== | 2006-04-11 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 776.075-776.925 MHz | 0.575 | 573Hz | 94K0G1W | 27 | 2 |
| 776.075-776.925 MHz | 1.04 | 573Hz | 94K0G1W | 27 | 2 |
| 776.075-776.925 MHz | 0.575 | 573Hz | 94K0D1W | 27 | 2 |
| 776.075-776.925 MHz | 0.902 | 573Hz | 97K0D1W | 27 | 2 |
| 776.1-776.9 MHz | 0.521 | 573Hz | 183KG1W | 27 | 2 |
| 776.1-776.9 MHz | 0.578 | 573Hz | 184KD1W | 27 | 2 |
| 776.163-776.838 MHz | 0.521 | 573Hz | 310KG1W | 27 | 2 |
| 776.163-776.838 MHz | 0.521 | 573Hz | 310KD1W | 27 | 2 |
| 776.2-776.838 MHz | 0.531 | 573Hz | 372KG1W | 27 | 2 |
| 776.2-776.8 MHz | 0.531 | 573Hz | 372KD1W | 27 | 2 |
Grants
TCB Grant - Application uOcyo9yo0ySwcQo+03R6aA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/11/2006 Application Dated: 04/10/2006 |
| Vyyo |
| 4015 Miranda Avenue |
| Palo Alto, CA 94304 |
| Attention: Dr. Mike Ritter , VP Marketing |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PBJV284-PLUS-A |
| Name of Grantee: | Vyyo |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Subscriber WMU |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 27 | 776.075 - 776.925 | 1.04 | 573.0 Hz | 94K0G1W |
| 20 | 27 | 776.075 - 776.925 | 0.902 | 573.0 Hz | 97K0D1W |
| Power Output listed is peak Conducted. The antenna(s) used for this transmitter must be fixed mounted on outdoor permanent structures with a separation distance of at least 20 cm from all persons during normal operation. The peak conducted output power at each antenna terminal must ot exceed 1.04 W and the peak radiated output power must not exceed 23.4 W EIRP. Users andinstallers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RFexposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application uOcyo9yo0ySwcQo+03R6aA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Vyyo 4015 Miranda Avenue Palo Alto, CA 94304 United States |
Date of Grant: 04/11/2006 Application Dated: 04/10/2006 |
| Attention: Dr. Mike Ritter , VP Marketing |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PBJV284-PLUS-A |
| Name of Grantee: | Vyyo |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Subscriber WMU |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 27 | 776.075 - 776.925 | 1.04 | 573.0 Hz | 94K0G1W |
| 20 | 27 | 776.075 - 776.925 | 0.902 | 573.0 Hz | 97K0D1W |
| Power Output listed is peak Conducted. The antenna(s) used for this transmitter must be fixed mounted on outdoor permanent structures with a separation distance of at least 20 cm from all persons during normal operation. The peak conducted output power at each antenna terminal must ot exceed 1.04 W and the peak radiated output power must not exceed 23.4 W EIRP. Users andinstallers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RFexposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/13/2006 Application Dated: 06/13/2006 |
| Vyyo |
| 4015 Miranda Avenue |
| Palo Alto, CA 94304 |
| Attention: Dr. Mike Ritter , VP Marketing |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PBJV284-PLUS-A |
| Name of Grantee: | Vyyo |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Subscriber WMU |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 27 | 776.075 - 776.925 | 0.575 | 573.0 Hz | 94K0G1W |
| 20 | 27 | 776.075 - 776.925 | 0.575 | 573.0 Hz | 94K0D1W |
| 20 | 27 | 776.1 - 776.9 | 0.521 | 573.0 Hz | 183KG1W |
| 20 | 27 | 776.1 - 776.9 | 0.578 | 573.0 Hz | 184KD1W |
| 20 | 27 | 776.1625 - 776.8375 | 0.521 | 573.0 Hz | 310KG1W |
| 20 | 27 | 776.1625 - 776.8375 | 0.521 | 573.0 Hz | 310KD1W |
| 20 | 27 | 776.2 - 776.8375 | 0.531 | 573.0 Hz | 372KG1W |
| 20 | 27 | 776.2 - 776.8 | 0.531 | 573.0 Hz | 372KD1W |
| Power Output listed is RMS Conducted. The antenna(s) used for this transmitter must be fixed mounted on outdoor permanent structures with a separation distance of at least 20 cm from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 0.575 W and the peak radiated output power must not exceed 12.9 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application lpbbL+lYjvGIKA28WCcxBA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Vyyo 4015 Miranda Avenue Palo Alto, CA 94304 United States |
Date of Grant: 06/13/2006 Application Dated: 06/13/2006 |
| Attention: Dr. Mike Ritter , VP Marketing |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PBJV284-PLUS-A |
| Name of Grantee: | Vyyo |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Subscriber WMU |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 27 | 776.075 - 776.925 | 0.575 | 573.0 Hz | 94K0G1W |
| 20 | 27 | 776.075 - 776.925 | 0.575 | 573.0 Hz | 94K0D1W |
| 20 | 27 | 776.1 - 776.9 | 0.521 | 573.0 Hz | 183KG1W |
| 20 | 27 | 776.1 - 776.9 | 0.578 | 573.0 Hz | 184KD1W |
| 20 | 27 | 776.1625 - 776.8375 | 0.521 | 573.0 Hz | 310KG1W |
| 20 | 27 | 776.1625 - 776.8375 | 0.521 | 573.0 Hz | 310KD1W |
| 20 | 27 | 776.2 - 776.8375 | 0.531 | 573.0 Hz | 372KG1W |
| 20 | 27 | 776.2 - 776.8 | 0.531 | 573.0 Hz | 372KD1W |
| Power Output listed is RMS Conducted. The antenna(s) used for this transmitter must be fixed mounted on outdoor permanent structures with a separation distance of at least 20 cm from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 0.575 W and the peak radiated output power must not exceed 12.9 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Vyyo 4015 Miranda Avenue Palo Alto, CA 94304 United States |
Date of Grant: 05/15/2006 Application Dated: 04/17/2006 |
| Attention: Dr. Mike Ritter , VP Marketing |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PBJV284-PLUS-A |
| Name of Grantee: | Vyyo |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Subscriber WMU |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 27 | 776.075 - 776.925 | 0.575 | 573.0 Hz | 94K0G1W |
| 20 | 27 | 776.075 - 776.925 | 0.575 | 573.0 Hz | 94K0D1W |
| 20 | 27 | 776.1 - 776.9 | 0.521 | 573.0 Hz | 183KG1W |
| 20 | 27 | 776.1 - 776.9 | 0.578 | 573.0 Hz | 184KD1W |
| 20 | 27 | 776.1625 - 776.8375 | 0.521 | 573.0 Hz | 310KG1W |
| 20 | 27 | 776.1625 - 776.8375 | 0.521 | 573.0 Hz | 310KD1W |
| 20 | 27 | 776.2 - 776.8375 | 0.531 | 573.0 Hz | 372KG1W |
| 20 | 27 | 776.2 - 776.8 | 0.531 | 573.0 Hz | 372KD1W |
| Power Output listed is RMS Conducted. The antenna(s) used for this transmitter must be fixed mounted on outdoor permanent structures with a separation distance of at least 20 cm from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 0.575 W and the peak radiated output power must not exceed 12.9 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.
|
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |