FCC ID PD917265NG

FCC ID	PD917265NG
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	PD9
Product Code	17265NG
Applicant Business	Intel Corporation 🇺🇸
Related Domains	intel.com
Equipment Class	Intel Tri-Band Wireless-AC 17265
Test Firm	DEKRA Testing and Certification, S.A.U.

Frequency Range	Application Purpose	Final Action Date
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2015-09-17
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2015-09-17
58320-62640 MHz	Class II permissive change or modification of presently authorized equipment	2015-09-17
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2015-09-17
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2015-02-18
58320-62640 MHz	Class II permissive change or modification of presently authorized equipment	2015-02-18
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2015-02-18
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2015-02-18
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2014-11-20
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2014-11-20
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2014-11-20
2402-2480 MHz	Original Equipment	2014-10-10
58320-62640 MHz	Original Equipment	2014-10-10
2402-2480 MHz	Original Equipment	2014-10-10
5180-5240 MHz	Original Equipment	2014-10-10

Document	Type	Available	File
User Manual	Users Manual	2016-03-15	PDF 1.5 MB
Users Manual	Users Manual	2016-03-15	PDF 1.5 MB
User Manual 1	Users Manual	2015-07-26	PDF 4.8 MB
User Manual 2	Users Manual	2015-07-26	PDF 3.5 MB
Users Manual	Users Manual	2015-05-19	PDF 1.3 MB
User Manual	Users Manual	2015-04-07	PDF 1.3 MB
User Manual 1	Users Manual	2015-04-07	PDF 1.1 MB
User Manual 2	Users Manual	2015-04-07	PDF 1.3 MB
Internal Photos	Internal Photos	2015-04-07	PDF 109.2 KB
External Photos	External Photos	2015-04-07	PDF 85.9 KB
Label and Location	ID Label/Location Info	2015-09-17	PDF 712.6 KB
Label and Location	ID Label/Location Info	2015-02-18	PDF 216.4 KB
Label and Location	ID Label/Location Info	2014-11-20	PDF 165.9 KB
Label and Location	ID Label/Location Info	2014-10-10	PDF 627.8 KB
Description Antenna	Operational Description	2014-10-10	PDF 711.5 KB
Test Setup Photos SAR	Test Setup Photos	2016-03-15	PDF 430.5 KB
Test Setup Photos MPE	Test Setup Photos	2015-07-26	PDF 226.4 KB
Test Setup Photos SAR	Test Setup Photos	2015-07-26	PDF 444 KB
Test Setup Photos Simulation	Test Setup Photos	2015-07-26	PDF 556.1 KB
Test Setup Photos SAR	Test Setup Photos	2015-05-19	PDF 616.5 KB
Test Setup Photos	Test Setup Photos	2015-04-07	PDF 624.9 KB
Test Setup Photos	Test Setup Photos	2015-04-07	PDF 920.3 KB
Test Setup Photos DFS	Test Setup Photos	2015-04-07	PDF 805 KB
Test Setup Photos DSS	Test Setup Photos	2015-04-07	PDF 714.9 KB
Test Setup Photos DTS	Test Setup Photos	2015-04-07	PDF 718.7 KB
Test Setup Photos NII	Test Setup Photos	2015-04-07	PDF 744.6 KB
Test Setup Photos SAR	Test Setup Photos	2015-04-07	PDF 608.2 KB
RF FCC Far Field EIRP Measurement Test Report	RF Exposure Info	2015-09-17	PDF 1.4 MB
RF UL Far Field EIRP Measurement Test Report	RF Exposure Info	2015-09-17	PDF 895.8 KB
Test Report Intel Far Field EIRP Measurement	Test Report	2015-09-17	PDF 1.4 MB
Test Report UL Far Field Eirp Measurement	Test Report	2015-09-17	PDF 895.8 KB
Test Report WiGig Pwr Density Simulation	Test Report	2015-09-17	PDF 1.4 MB
Simulation Test Report	RF Exposure Info	2015-02-18	PDF 1.3 MB
Simulation Test Report Metadata only	Test Report	2015-02-18	PDF 1.3 MB
Test Report DFS	Test Report	2014-10-10	PDF 287.8 KB
Test Report DSS	Test Report	2014-10-10	PDF 1.8 MB
Test Report DTS	Test Report	2014-10-10	PDF 5.4 MB
Test Report DTS BLE	Test Report	2014-10-10	PDF 1.2 MB
Test Report DXT	Test Report	2014-10-10	PDF 2.1 MB
Test Report NII 1	Test Report	2014-10-10	PDF 2.9 MB
Test Report NII 2	Test Report	2014-10-10	PDF 2.8 MB
Test Report NII 3	Test Report	2014-10-10	PDF 5.7 MB
Test Report NII 4	Test Report	2014-10-10	PDF 3.5 MB
Test Repot JBP	Test Report	2014-10-10	PDF 409 KB
Passive Scan and Security Plan	Attestation Statements	2015-09-17	PDF 18.3 KB
Channel and Security Attestation	Attestation Statements	2015-02-18	PDF 18.3 KB
Channel Attestation	Attestation Statements	2014-11-20	PDF 18.3 KB
Passive-Active Scan Attestation	Attestation Statements	2014-10-10	PDF 18.3 KB
Authorization Letter	Cover Letter(s)	2015-09-17	PDF 174.8 KB
Confidentiality Letter	Cover Letter(s)	2015-09-17	PDF 51.7 KB
Permissive Change Letter	Cover Letter(s)	2015-09-17	PDF 23.7 KB
Confidentiality Letter	Cover Letter(s)	2015-02-18	PDF 180.2 KB
Permissive Change Letter	Cover Letter(s)	2015-02-18	PDF 175.3 KB
Permissive Change Letter Revised	Cover Letter(s)	2015-02-18	PDF 23.9 KB
Confidentiality Letter	Cover Letter(s)	2014-11-20	PDF 141.4 KB
Permissive Change Letter	Cover Letter(s)	2014-11-20	PDF 86.8 KB
Authorization Letter	Cover Letter(s)	2014-10-10	PDF 16.5 KB
Confidentiality Letter	Cover Letter(s)	2014-10-10	PDF 19.1 KB
Modular Approval Letter	Cover Letter(s)	2014-10-10	PDF 16.6 KB
RF Exposure SAR Report	RF Exposure Info	2015-09-17	PDF 3 MB
RF Intel Wigig Pwr Density Simulation Report	RF Exposure Info	2015-09-17	PDF 1.4 MB
RF Exposure MPE Correlation Report Metadata only	RF Exposure Info	2015-02-18	PDF 526.1 KB
RF Exposure MPE Correlation Report Rev	RF Exposure Info	2015-02-18	PDF 380 KB
RF Exposure SAR Report	RF Exposure Info	2015-02-18	PDF 2.8 MB
RF Exposure SAR Report	RF Exposure Info	2014-11-20	PDF 2.8 MB
Mobile Exposure Conditions Metadata only	RF Exposure Info	2014-10-10	PDF 110.7 KB
RF Exposure MPE Metadata only	RF Exposure Info	2014-10-10	PDF 109.2 KB
RF Exposure SAR Report	RF Exposure Info	2014-10-10	PDF 2.8 MB
RF Exposure mobile exposure conditions Revised	RF Exposure Info	2014-10-10	PDF 110.7 KB
Block Diagram Metadata only	Block Diagram		PDF 141.2 KB
Schematics Metadata only	Schematics		PDF 319 KB
Description Metadata only	Operational Description		PDF 1.8 MB
Description Metadata only	Operational Description		PDF 77 KB
Description Antenna Metadata only	Operational Description		PDF 1.4 MB
Description Antenna Metadata only	Operational Description		PDF 1,011 KB
Description Antenna TE Metadata only	Operational Description		PDF 1.7 MB
Description Antenna Yageo Metadata only	Operational Description		PDF 2.2 MB
Description Hardware Metadata only	Operational Description		PDF 1.8 MB
Description WiGig Subsystem Theory of Operation Metadata only	Operational Description		PDF 1.7 MB
Description of Operation Metadata only	Operational Description		PDF 1.8 MB

Application ID	zkCN58Dt46IwY0Qr43XAGw==
Final Action Date	2015-09-17
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0008035131
Model	17265NG
Frequency Range	5180-5240 MHz
Equipment Class	NII - Unlicensed National Information Infrastructure TX
Device Description	Intel Tri-Band Wireless-AC 17265
Responsible Party	Steven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com , 803-315-6704
Technical Contact	Jay Moulton, RF Exposure Lab, info@rfexposurelab.com , 7604712100
Test Firm	Rafael Lopez Martin, DEKRA Testing and Certification, S.A.U., rafael.lopez@dekra.com , 34-9562-61 91 00
TCB Email	Hotline@acbcert.com
TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term Confidentiality	Yes
Short-Term Confidentiality Date	03/15/2016
Long-Term Confidentiality	Yes
Grant Deferral	No
Modular Equipment	Single Modular Approval
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 1.34W/kg and 1.35W/kg respectively. This change is to request approval for portable category conditions for specific host tablet PC, model number: Dell P58G, with WLAN/BT antenna Speedwire part no.F.OG.FN-6019-004 (Tx1/Rx1) and (Tx2/Rx2) antenna is of same type and lower gain from original approval. SAR testing in accordance to §2.1093 to demonstrate RF exposure compliance. SAR test report is provided as part of this filing.

Application ID	Date	Purpose
zkCN58Dt46IwY0Qr43XAGw==	2015-09-17	Class II permissive change or modification of presently authorized equipment
R0qhraxDs9n1o0h6pYL5tQ==	2015-09-17	Class II permissive change or modification of presently authorized equipment
OXO3TbsN8NYbOs03Z/lpBg==	2015-09-17	Class II permissive change or modification of presently authorized equipment
L5mQ3BPV8K89IJo6A4u8Og==	2015-09-17	Class II permissive change or modification of presently authorized equipment
xWZ/kynMq9D+KJayXYU9EA==	2015-02-18	Class II permissive change or modification of presently authorized equipment
vrhRT9F/BG16cRg2dznMAg==	2015-02-18	Class II permissive change or modification of presently authorized equipment
bNZDzqdT/yfmuqBX2ptKXA==	2015-02-18	Class II permissive change or modification of presently authorized equipment
FOaVsD4zoJhCTvk9/gsk1g==	2015-02-18	Class II permissive change or modification of presently authorized equipment
m3jOP5ngY5tOQR6FTQ/W6A==	2014-11-20	Class II permissive change or modification of presently authorized equipment
eRapyW1H+oWw4zZ9zFkzFg==	2014-11-20	Class II permissive change or modification of presently authorized equipment
dAdvkwTsmwJ4lciPGdosFg==	2014-11-20	Class II permissive change or modification of presently authorized equipment
rSyepPtyiqEypVBbFsOaiw==	2014-10-10	Original Equipment
MZd+H4Y3nmiqriHCz6odtg==	2014-10-10	Original Equipment
HETkNt9vw7Y50Ryhtbm3AA==	2014-10-10	Original Equipment
HBG7EtQzgYod4yLn0Fcc4w==	2014-10-10	Original Equipment
5DwvgF1C+g/H26HxrC2TJA==	2014-10-10	Original Equipment

Frequency	Output	Rules	Grant Notes
		15B	CC
2402-2480 MHz	0.004	15C	CC
2402-2480 MHz	0.0050000	15C	CC
2412-2462 MHz	0.118	15C	CC, MO
2422-2452 MHz	0.048	15C	CC, MO
5190-5230 MHz	0.046	15E	CC, MO
5190-5230 MHz	0.049	15E	CC, MO
5210 MHz	0.03	15E	CC, MO
5210 MHz	0.052	15E	CC, MO
5260-5320 MHz	0.046	15E	CC, MO, ND
5270-5310 MHz	0.088	15E	CC, MO, ND
5290 MHz	0.028	15E	CC, MO, ND
5500-5700 MHz	0.056	15E	CC, MO, ND
5510-5670 MHz	0.091	15E	CC, MO, ND
5530-5690 MHz	0.092	15E	CC, MO, ND
5710 MHz	0.089	15E	CC, MO, ND
5720 MHz	0.043	15E	CC, MO, ND
5745-5825 MHz	0.046	15E	38, CC, MO, ND
5755-5795 MHz	0.09	15E	38, CC, MO, ND
5775 MHz	0.09	15E	38, CC, MO, ND
58320-62640 MHz	0.0120000	15C	CC

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 09/17/2015

Application Dated: 09/17/2015

Intel Corporation

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Tri-Band Wireless-AC 17265
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.028
CC MO	15E	5190.0 - 5230.0	0.049
CC MO	15E	5210.0 - 5210.0	0.052
CC MO ND	15E	5260.0 - 5320.0	0.046
CC MO ND	15E	5270.0 - 5310.0	0.088
CC MO ND	15E	5290.0 - 5290.0	0.028
CC MO ND	15E	5500.0 - 5700.0	0.056
CC MO ND	15E	5510.0 - 5670.0	0.091
CC MO ND	15E	5720.0 - 5720.0	0.043
CC MO ND	15E	5710.0 - 5710.0	0.089
CC MO ND	15E	5530.0 - 5690.0	0.092
38 CC MO ND	15E	5745.0 - 5825.0	0.046
38 CC MO ND	15E	5755.0 - 5795.0	0.09
38 CC MO ND	15E	5775.0 - 5775.0	0.09

Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 1.34W/kg and 1.35W/kg respectively.

This change is to request approval for portable category conditions for specific host tablet PC, model number: Dell P58G, with WLAN/BT antenna Speedwire part no.F.OG.FN-6019-004 (Tx1/Rx1) and (Tx2/Rx2) antenna is of same type and lower gain from original approval.

SAR testing in accordance to §2.1093 to demonstrate RF exposure compliance. SAR test report is provided as part of this filing.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 09/17/2015

Application Dated: 09/17/2015

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Tri-Band Wireless-AC 17265
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.028
CC MO	15E	5190.0 - 5230.0	0.049
CC MO	15E	5210.0 - 5210.0	0.052
CC MO ND	15E	5260.0 - 5320.0	0.046
CC MO ND	15E	5270.0 - 5310.0	0.088
CC MO ND	15E	5290.0 - 5290.0	0.028
CC MO ND	15E	5500.0 - 5700.0	0.056
CC MO ND	15E	5510.0 - 5670.0	0.091
CC MO ND	15E	5720.0 - 5720.0	0.043
CC MO ND	15E	5710.0 - 5710.0	0.089
CC MO ND	15E	5530.0 - 5690.0	0.092
38 CC MO ND	15E	5745.0 - 5825.0	0.046
38 CC MO ND	15E	5755.0 - 5795.0	0.09
38 CC MO ND	15E	5775.0 - 5775.0	0.09

Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 1.34W/kg and 1.35W/kg respectively.

This change is to request approval for portable category conditions for specific host tablet PC, model number: Dell P58G, with WLAN/BT antenna Speedwire part no.F.OG.FN-6019-004 (Tx1/Rx1) and (Tx2/Rx2) antenna is of same type and lower gain from original approval.

SAR testing in accordance to §2.1093 to demonstrate RF exposure compliance. SAR test report is provided as part of this filing.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application xWZ/kynMq9D+KJayXYU9EA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 02/18/2015

Application Dated: 01/29/2015

Intel Corporation

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.005

Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Results for Body and Simultaneous SAR is 0.01W/kg and 1.40 W/kg respectively.

This change is to request approval for portable category specific host tablet PC, model number: HP HSTNN-I22C, with antenna TE Connectivity part no 6036B0131201/1556680-01 (Tx1 & Tx2) and Yageo 6063B0129101/ANTA0HV08352WLAN9 (Tx1 & Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 02/18/2015

Application Dated: 01/29/2015

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.005

Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Results for Body and Simultaneous SAR is 0.01W/kg and 1.40 W/kg respectively.

This change is to request approval for portable category specific host tablet PC, model number: HP HSTNN-I22C, with antenna TE Connectivity part no 6036B0131201/1556680-01 (Tx1 & Tx2) and Yageo 6063B0129101/ANTA0HV08352WLAN9 (Tx1 & Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application vrhRT9F/BG16cRg2dznMAg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 02/18/2015

Application Dated: 01/29/2015

Intel Corporation

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Part 15 Low Power Transceiver, Rx Verified
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	58320.0 - 62640.0	0.012

Power listed is conducted. Highest EIRP with 15.45 dBi antenna for this specific host is 0.421W. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. This device can be used in mobile/portable configurations. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and OEM installers must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations.

This change is to request approval for portable category conditions for specific host tablet PC, model number: HP HSTNN-I22C, with WiGig (60GHz) antenna array Intel part no. 10041RRFW. RF exposure evaluation was performed according to §2.1093 with respect to power density limits. Max allowed output power is 6.4dBm (4.36mW) conducted with maximum duty cycle of 70%.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 02/18/2015

Application Dated: 01/29/2015

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Part 15 Low Power Transceiver, Rx Verified
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	58320.0 - 62640.0	0.012

Power listed is conducted. Highest EIRP with 15.45 dBi antenna for this specific host is 0.421W. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. This device can be used in mobile/portable configurations. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and OEM installers must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations.

This change is to request approval for portable category conditions for specific host tablet PC, model number: HP HSTNN-I22C, with WiGig (60GHz) antenna array Intel part no. 10041RRFW. RF exposure evaluation was performed according to §2.1093 with respect to power density limits. Max allowed output power is 6.4dBm (4.36mW) conducted with maximum duty cycle of 70%.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application rSyepPtyiqEypVBbFsOaiw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 10/10/2014

Application Dated: 10/09/2014

Intel Corporation

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15B	-

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 10/10/2014

Application Dated: 10/09/2014

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15B	-

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application R0qhraxDs9n1o0h6pYL5tQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 09/17/2015

Application Dated: 09/17/2015

Intel Corporation

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Digital Transmission System
Notes:	Intel Tri-Band Wireless-AC 17265
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.004
CC MO	15C	2412.0 - 2462.0	0.118
CC MO	15C	2422.0 - 2452.0	0.048

Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 MHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are 1.12W/kg and 1.35W/kg respectively.

This change is to request approval for portable category conditions for specific host tablet PC, model number: Dell P58G, with WLAN/BT antenna Speedwire part no. F.OG.FN-6019-004 (Tx1/Rx1) and (Tx2/Rx2) antenna is of same type and lower gain from original approval.

SAR testing in accordance to §2.1093 to demonstrate RF exposure compliance. SAR test report is provided as part of this filing.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 09/17/2015

Application Dated: 09/17/2015

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Digital Transmission System
Notes:	Intel Tri-Band Wireless-AC 17265
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.004
CC MO	15C	2412.0 - 2462.0	0.118
CC MO	15C	2422.0 - 2452.0	0.048

Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 MHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are 1.12W/kg and 1.35W/kg respectively.

This change is to request approval for portable category conditions for specific host tablet PC, model number: Dell P58G, with WLAN/BT antenna Speedwire part no. F.OG.FN-6019-004 (Tx1/Rx1) and (Tx2/Rx2) antenna is of same type and lower gain from original approval.

SAR testing in accordance to §2.1093 to demonstrate RF exposure compliance. SAR test report is provided as part of this filing.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application OXO3TbsN8NYbOs03Z/lpBg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 09/17/2015

Application Dated: 09/09/2015

Intel Corporation

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Part 15 Low Power Transceiver, Rx Verified
Notes:	Intel Tri-Band Wireless-AC 17265
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	58320.0 - 62640.0	0.012

Power listed is conducted. Highest EIRP with 15.45 dBi antenna described in the application is 0.40738 W. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. End-users and OEM installers must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.

This change is to request approval for portable category conditions for specific host tablet PC, model number: Dell P58G, with WLAN/BT antenna Speedwire part no.F.OG.FN-6019-004 (Tx1/Rx1) and (Tx2/Rx2) antenna is of same type and lower gain from original approval. Change is also to request approval for portable category conditions for specific host tablet PC, model number: Dell P58G, with WiGig (60GHz) antenna array Intel part no. 10041RRFW with a power of 4dBm and a duty cycle of 70%. RF exposure evaluation was performed according to section 2.1093 with respect to power density limits.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 09/17/2015

Application Dated: 09/09/2015

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Part 15 Low Power Transceiver, Rx Verified
Notes:	Intel Tri-Band Wireless-AC 17265
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	58320.0 - 62640.0	0.012

Power listed is conducted. Highest EIRP with 15.45 dBi antenna described in the application is 0.40738 W. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. End-users and OEM installers must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.

This change is to request approval for portable category conditions for specific host tablet PC, model number: Dell P58G, with WLAN/BT antenna Speedwire part no.F.OG.FN-6019-004 (Tx1/Rx1) and (Tx2/Rx2) antenna is of same type and lower gain from original approval. Change is also to request approval for portable category conditions for specific host tablet PC, model number: Dell P58G, with WiGig (60GHz) antenna array Intel part no. 10041RRFW with a power of 4dBm and a duty cycle of 70%. RF exposure evaluation was performed according to section 2.1093 with respect to power density limits.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application MZd+H4Y3nmiqriHCz6odtg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 10/10/2014

Application Dated: 10/09/2014

Intel Corporation

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.005

Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Results for Body and Simultaneous SAR is 0.01W/kg and 1.48 W/kg respectively.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 10/10/2014

Application Dated: 10/09/2014

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.005

Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Results for Body and Simultaneous SAR is 0.01W/kg and 1.48 W/kg respectively.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application m3jOP5ngY5tOQR6FTQ/W6A==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 11/20/2014

Application Dated: 11/19/2014

Intel Corporation

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.005

Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Results for Body and Simultaneous SAR is 0.01W/kg and 1.40 W/kg respectively.

This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 11/20/2014

Application Dated: 11/19/2014

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.005

Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Results for Body and Simultaneous SAR is 0.01W/kg and 1.40 W/kg respectively.

This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application L5mQ3BPV8K89IJo6A4u8Og==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 09/17/2015

Application Dated: 09/17/2015

Intel Corporation

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Intel Tri-Band Wireless-AC 17265
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.005

Power Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR is 0.01W/kg and 1.35 W/kg respectively.

This change is to request approval for portable category conditions for specific host tablet PC, model number: Dell P58G, with WLAN/BT antenna Speedwire part no.F.OG.FN-6019-004 (Tx1/Rx1) and (Tx2/Rx2) antenna is of same type and lower gain from original approval.

SAR testing in accordance to §2.1093 to demonstrate RF exposure compliance. SAR test report is provided as part of this filing.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 09/17/2015

Application Dated: 09/17/2015

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Intel Tri-Band Wireless-AC 17265
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.005

Power Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR is 0.01W/kg and 1.35 W/kg respectively.

This change is to request approval for portable category conditions for specific host tablet PC, model number: Dell P58G, with WLAN/BT antenna Speedwire part no.F.OG.FN-6019-004 (Tx1/Rx1) and (Tx2/Rx2) antenna is of same type and lower gain from original approval.

SAR testing in accordance to §2.1093 to demonstrate RF exposure compliance. SAR test report is provided as part of this filing.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application HETkNt9vw7Y50Ryhtbm3AA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 10/10/2014

Application Dated: 10/09/2014

Intel Corporation

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Part 15 Low Power Transceiver, Rx Verified
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	58320.0 - 62640.0	0.012

Power listed is conducted. Highest EIRP with 15.45 dBi antenna described in the application is 0.40738 W. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users and OEM installers must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 10/10/2014

Application Dated: 10/09/2014

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Part 15 Low Power Transceiver, Rx Verified
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	58320.0 - 62640.0	0.012

Power listed is conducted. Highest EIRP with 15.45 dBi antenna described in the application is 0.40738 W. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users and OEM installers must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application HBG7EtQzgYod4yLn0Fcc4w==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 10/10/2014

Application Dated: 10/09/2014

Intel Corporation

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Digital Transmission System
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.004
CC MO	15C	2412.0 - 2462.0	0.118
CC MO	15C	2422.0 - 2452.0	0.048

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 0.55 W/kg. and 1.48W/kg respectively.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 10/10/2014

Application Dated: 10/09/2014

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Digital Transmission System
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.004
CC MO	15C	2412.0 - 2462.0	0.118
CC MO	15C	2422.0 - 2452.0	0.048

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 0.55 W/kg. and 1.48W/kg respectively.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application FOaVsD4zoJhCTvk9/gsk1g==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 02/18/2015

Application Dated: 01/29/2015

Intel Corporation

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.028
CC MO	15E	5190.0 - 5230.0	0.049
CC MO	15E	5210.0 - 5210.0	0.052
CC MO ND	15E	5260.0 - 5320.0	0.046
CC MO ND	15E	5270.0 - 5310.0	0.088
CC MO ND	15E	5290.0 - 5290.0	0.028
CC MO ND	15E	5500.0 - 5700.0	0.056
CC MO ND	15E	5510.0 - 5670.0	0.091
CC MO ND	15E	5720.0 - 5720.0	0.043
CC MO ND	15E	5710.0 - 5710.0	0.089
CC MO ND	15E	5530.0 - 5690.0	0.092
38 CC MO ND	15E	5745.0 - 5825.0	0.046
38 CC MO ND	15E	5755.0 - 5795.0	0.09
38 CC MO ND	15E	5775.0 - 5775.0	0.09

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 1.39W/kg. and 1.40W/kg respectively.

This change is to request approval for portable category specific host tablet PC, model number: HP HSTNN-I22C, with antenna TE Connectivity part no 6036B0131201/1556680-01 (Tx1 & Tx2) and Yageo 6063B0129101/ANTA0HV08352WLAN9 (Tx1 & Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 02/18/2015

Application Dated: 01/29/2015

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.028
CC MO	15E	5190.0 - 5230.0	0.049
CC MO	15E	5210.0 - 5210.0	0.052
CC MO ND	15E	5260.0 - 5320.0	0.046
CC MO ND	15E	5270.0 - 5310.0	0.088
CC MO ND	15E	5290.0 - 5290.0	0.028
CC MO ND	15E	5500.0 - 5700.0	0.056
CC MO ND	15E	5510.0 - 5670.0	0.091
CC MO ND	15E	5720.0 - 5720.0	0.043
CC MO ND	15E	5710.0 - 5710.0	0.089
CC MO ND	15E	5530.0 - 5690.0	0.092
38 CC MO ND	15E	5745.0 - 5825.0	0.046
38 CC MO ND	15E	5755.0 - 5795.0	0.09
38 CC MO ND	15E	5775.0 - 5775.0	0.09

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 1.39W/kg. and 1.40W/kg respectively.

This change is to request approval for portable category specific host tablet PC, model number: HP HSTNN-I22C, with antenna TE Connectivity part no 6036B0131201/1556680-01 (Tx1 & Tx2) and Yageo 6063B0129101/ANTA0HV08352WLAN9 (Tx1 & Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application eRapyW1H+oWw4zZ9zFkzFg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 11/20/2014

Application Dated: 11/19/2014

Intel Corporation

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.028
CC MO	15E	5190.0 - 5230.0	0.049
CC MO	15E	5210.0 - 5210.0	0.052
CC MO ND	15E	5260.0 - 5320.0	0.046
CC MO ND	15E	5270.0 - 5310.0	0.088
CC MO ND	15E	5290.0 - 5290.0	0.028
CC MO ND	15E	5500.0 - 5700.0	0.056
CC MO ND	15E	5510.0 - 5670.0	0.091
CC MO ND	15E	5720.0 - 5720.0	0.043
CC MO ND	15E	5710.0 - 5710.0	0.089
CC MO ND	15E	5530.0 - 5690.0	0.092
38 CC MO ND	15E	5745.0 - 5825.0	0.046
38 CC MO ND	15E	5755.0 - 5795.0	0.09
38 CC MO ND	15E	5775.0 - 5775.0	0.09

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 0.74W/kg. and 1.40W/kg respectively.

This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 11/20/2014

Application Dated: 11/19/2014

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.028
CC MO	15E	5190.0 - 5230.0	0.049
CC MO	15E	5210.0 - 5210.0	0.052
CC MO ND	15E	5260.0 - 5320.0	0.046
CC MO ND	15E	5270.0 - 5310.0	0.088
CC MO ND	15E	5290.0 - 5290.0	0.028
CC MO ND	15E	5500.0 - 5700.0	0.056
CC MO ND	15E	5510.0 - 5670.0	0.091
CC MO ND	15E	5720.0 - 5720.0	0.043
CC MO ND	15E	5710.0 - 5710.0	0.089
CC MO ND	15E	5530.0 - 5690.0	0.092
38 CC MO ND	15E	5745.0 - 5825.0	0.046
38 CC MO ND	15E	5755.0 - 5795.0	0.09
38 CC MO ND	15E	5775.0 - 5775.0	0.09

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 0.74W/kg. and 1.40W/kg respectively.

This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application dAdvkwTsmwJ4lciPGdosFg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 11/20/2014

Application Dated: 11/19/2014

Intel Corporation

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Digital Transmission System
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.004
CC MO	15C	2412.0 - 2462.0	0.118
CC MO	15C	2422.0 - 2452.0	0.048

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 0.79W/kg and 1.40W/kg respectively.

This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 11/20/2014

Application Dated: 11/19/2014

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Digital Transmission System
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.004
CC MO	15C	2412.0 - 2462.0	0.118
CC MO	15C	2422.0 - 2452.0	0.048

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 0.79W/kg and 1.40W/kg respectively.

This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application bNZDzqdT/yfmuqBX2ptKXA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 02/18/2015

Application Dated: 01/29/2015

Intel Corporation

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Digital Transmission System
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.004
CC MO	15C	2412.0 - 2462.0	0.118
CC MO	15C	2422.0 - 2452.0	0.048

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 1.08W/kg and 1.40W/kg respectively.

This change is to request approval for portable category specific host tablet PC, model number: HP HSTNN-I22C, with antenna TE Connectivity part no 6036B0131201/1556680-01 (Tx1 & Tx2) and Yageo 6063B0129101/ANTA0HV08352WLAN9 (Tx1 & Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 02/18/2015

Application Dated: 01/29/2015

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Digital Transmission System
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.004
CC MO	15C	2412.0 - 2462.0	0.118
CC MO	15C	2422.0 - 2452.0	0.048

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 1.08W/kg and 1.40W/kg respectively.

This change is to request approval for portable category specific host tablet PC, model number: HP HSTNN-I22C, with antenna TE Connectivity part no 6036B0131201/1556680-01 (Tx1 & Tx2) and Yageo 6063B0129101/ANTA0HV08352WLAN9 (Tx1 & Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 5DwvgF1C+g/H26HxrC2TJA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 10/10/2014

Application Dated: 10/09/2014

Intel Corporation

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.028
CC MO	15E	5190.0 - 5230.0	0.046
CC MO	15E	5210.0 - 5210.0	0.03
CC MO ND	15E	5260.0 - 5320.0	0.046
CC MO ND	15E	5270.0 - 5310.0	0.088
CC MO ND	15E	5290.0 - 5290.0	0.028
CC MO ND	15E	5500.0 - 5700.0	0.056
CC MO ND	15E	5510.0 - 5670.0	0.091
CC MO ND	15E	5720.0 - 5720.0	0.043
CC MO ND	15E	5710.0 - 5710.0	0.089
CC MO ND	15E	5530.0 - 5690.0	0.092
38 CC MO ND	15E	5745.0 - 5825.0	0.046
38 CC MO ND	15E	5755.0 - 5795.0	0.09
38 CC MO ND	15E	5775.0 - 5775.0	0.09

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 0.76 W/kg. and 1.48W/kg respectively.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 10/10/2014

Application Dated: 10/09/2014

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD917265NG

Name of Grantee:	Intel Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.028
CC MO	15E	5190.0 - 5230.0	0.046
CC MO	15E	5210.0 - 5210.0	0.03
CC MO ND	15E	5260.0 - 5320.0	0.046
CC MO ND	15E	5270.0 - 5310.0	0.088
CC MO ND	15E	5290.0 - 5290.0	0.028
CC MO ND	15E	5500.0 - 5700.0	0.056
CC MO ND	15E	5510.0 - 5670.0	0.091
CC MO ND	15E	5720.0 - 5720.0	0.043
CC MO ND	15E	5710.0 - 5710.0	0.089
CC MO ND	15E	5530.0 - 5690.0	0.092
38 CC MO ND	15E	5745.0 - 5825.0	0.046
38 CC MO ND	15E	5755.0 - 5795.0	0.09
38 CC MO ND	15E	5775.0 - 5775.0	0.09

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 0.76 W/kg. and 1.48W/kg respectively.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:

Intel Tri-Band Wireless-AC 17265

by Intel Corporation

Grantee Code: PD9 Product Code: 17265NG

Latest application date: 2015-09-17

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application zkCN58Dt46IwY0Qr43XAGw==

EAS Grant - Application zkCN58Dt46IwY0Qr43XAGw==

TCB Grant - Application xWZ/kynMq9D+KJayXYU9EA==

EAS Grant - Application xWZ/kynMq9D+KJayXYU9EA==

TCB Grant - Application vrhRT9F/BG16cRg2dznMAg==

EAS Grant - Application vrhRT9F/BG16cRg2dznMAg==

TCB Grant - Application rSyepPtyiqEypVBbFsOaiw==

EAS Grant - Application rSyepPtyiqEypVBbFsOaiw==

TCB Grant - Application R0qhraxDs9n1o0h6pYL5tQ==

EAS Grant - Application R0qhraxDs9n1o0h6pYL5tQ==

TCB Grant - Application OXO3TbsN8NYbOs03Z/lpBg==

EAS Grant - Application OXO3TbsN8NYbOs03Z/lpBg==

TCB Grant - Application MZd+H4Y3nmiqriHCz6odtg==

EAS Grant - Application MZd+H4Y3nmiqriHCz6odtg==

TCB Grant - Application m3jOP5ngY5tOQR6FTQ/W6A==

EAS Grant - Application m3jOP5ngY5tOQR6FTQ/W6A==

TCB Grant - Application L5mQ3BPV8K89IJo6A4u8Og==

EAS Grant - Application L5mQ3BPV8K89IJo6A4u8Og==

TCB Grant - Application HETkNt9vw7Y50Ryhtbm3AA==

EAS Grant - Application HETkNt9vw7Y50Ryhtbm3AA==

TCB Grant - Application HBG7EtQzgYod4yLn0Fcc4w==

EAS Grant - Application HBG7EtQzgYod4yLn0Fcc4w==

TCB Grant - Application FOaVsD4zoJhCTvk9/gsk1g==

EAS Grant - Application FOaVsD4zoJhCTvk9/gsk1g==

TCB Grant - Application eRapyW1H+oWw4zZ9zFkzFg==

EAS Grant - Application eRapyW1H+oWw4zZ9zFkzFg==

TCB Grant - Application dAdvkwTsmwJ4lciPGdosFg==

EAS Grant - Application dAdvkwTsmwJ4lciPGdosFg==

TCB Grant - Application bNZDzqdT/yfmuqBX2ptKXA==

EAS Grant - Application bNZDzqdT/yfmuqBX2ptKXA==

TCB Grant - Application 5DwvgF1C+g/H26HxrC2TJA==

EAS Grant - Application 5DwvgF1C+g/H26HxrC2TJA==