FCC ID PD93165NGU

Intel Dual Band Wireless-AC 3165

by Intel Corporation

Grantee Code: PD9   Product Code: 3165NGU
Latest application date: 2018-09-14

Device Images

FCC ID Device Details

FCC IDPD93165NGU
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePD9
Product Code3165NGU
Applicant BusinessIntel Corporation 🇺🇸
Related Domains intel.com
Equipment ClassIntel Dual Band Wireless-AC 3165
Test FirmIntel Corporation S.A.S.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-09-14
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-09-14
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-09-14
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-08-23
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-08-23
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-08-23
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-03-19
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-03-19
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-03-19
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-03-05
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-03-05
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-03-05
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-10-19
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-10-19
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-10-19
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-10-17
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-10-17
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-10-17
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-09-15
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-09-15
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-09-15
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-09-14
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-09-14
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-09-14
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-08-31
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-08-31
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-08-31
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-06-14
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-06-14
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-06-14
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-03-09
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-03-09
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-03-09
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-02-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-02-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-02-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-10-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-10-21
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-10-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-10-20
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-10-20
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-10-20
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-10-18
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-10-18
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-05-02
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-05-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-05-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-04-29
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-04-29
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-04-29
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-04-27
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-04-27
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-04-27
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-04-27
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-04-27
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-04-27
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-04-07
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-04-07
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-04-07
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-02-29
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-02-29
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-02-29
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-12-03
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-12-03
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-12-03
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-09-25
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-09-25
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-09-25
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-09-08
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-09-08
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-09-08
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-09-08
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-09-08
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-09-08
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-08-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-08-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-08-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-08-20
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-08-20
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-08-20
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-06-22
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-06-22
5180-5230 MHzClass II permissive change or modification of presently authorized equipment2015-06-22
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-06-10
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-06-10
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-06-10
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-04-06
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-04-06
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-04-06
2402-2480 MHzOriginal Equipment2015-01-26
5180-5240 MHzOriginal Equipment2015-01-26
2402-2480 MHzOriginal Equipment2015-01-26

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2019-03-13PDF 1.9 MB
User ManualUsers Manual2019-02-19PDF 3.2 MB
User ManualUsers Manual2018-09-15PDF 3.4 MB
User ManualUsers Manual2018-09-01PDF 4.7 MB
User ManualUsers Manual2018-04-17PDF 5.7 MB
User ManualUsers Manual2018-04-15PDF 3.7 MB
User ManualUsers Manual2018-03-14PDF 2.8 MB
User ManualUsers Manual2018-03-13PDF 3.7 MB
User Manual LLWUsers Manual2018-03-13PDF 479.9 KB
User Manual 1Users Manual2018-02-27PDF 3.1 MB
User Manual 2Users Manual2018-02-27PDF 3.3 MB
User Manual RegulatoryUsers Manual2018-02-27PDF 235.1 KB
User ManualUsers Manual2017-12-11PDF 3.7 MB
User Manual 1Attestation Statements2017-10-19PDF 71.9 KB
User Manual 1Users Manual2017-09-05PDF 3.5 MB
User Manual 2Users Manual2017-09-05PDF 3.6 MB
User Manual WarrantyUsers Manual2017-09-05PDF 477.2 KB
User Manual 1Users Manual2017-08-20PDF 2.8 MB
User Manual 2Users Manual2017-08-20PDF 534.9 KB
User Manual 3Users Manual2017-08-20PDF 534.9 KB
User ManualUsers Manual2017-04-20PDF 4.6 MB
User ManualUsers Manual2017-04-18PDF 3 MB
User ManualUsers Manual2016-10-29PDF 1.6 MB
User ManualUsers Manual2016-10-26PDF 1.8 MB
User ManualUsers Manual2016-10-24PDF 1.7 MB
User ManualUsers Manual2016-10-23PDF 1.3 MB
User ManaulUsers Manual2016-10-18PDF 429.5 KB
User ManualUsers Manual2016-10-04PDF 4.9 MB
User ManualUsers Manual2016-08-26PDF 2.8 MB
User ManualUsers Manual2016-05-30PDF 2 MB
Permissive Change LetterExternal Photos2017-10-19PDF 578.4 KB
Labels and LocationsID Label/Location Info2018-09-14PDF 187.2 KB
Labels and LocationsID Label/Location Info2018-08-23PDF 380.4 KB
Labels and LocationsID Label/Location Info2018-03-19PDF 169.2 KB
Labels and LocationsID Label/Location Info2018-03-05PDF 179.8 KB
Labels and LocationsID Label/Location Info2017-10-19PDF 432.2 KB
Labels and LocationsID Label/Location Info2017-10-17PDF 4 MB
Labels and LocationsID Label/Location Info2017-09-15PDF 192.6 KB
Labels and LocationsID Label/Location Info2017-09-14PDF 4 MB
Labels and LocationsID Label/Location Info2017-08-31PDF 481.6 KB
Labels and LocationsID Label/Location Info2017-06-14PDF 223.9 KB
Labels and LocationsID Label/Location Info2017-03-09PDF 283.4 KB
Labels and LocationsID Label/Location Info2017-02-21PDF 233.4 KB
Labels and LocationsID Label/Location Info2016-10-21PDF 238.8 KB
Labels and LocationsID Label/Location Info2016-10-20PDF 574 KB
Test Setup PhotosTest Setup Photos2019-03-13PDF 473.5 KB
Test Setup Photos HTKTest Setup Photos2019-02-19PDF 497.9 KB
Test Setup Photos WNCTest Setup Photos2019-02-19PDF 198.1 KB
Test Setup Photos LuxshareTest Setup Photos2018-09-15PDF 363.8 KB
Test Setup Photos South StarTest Setup Photos2018-09-15PDF 378.9 KB
Test Setup PhotosTest Setup Photos2018-09-01PDF 638.9 KB
Test Setup PhotosTest Setup Photos2018-04-17PDF 309.5 KB
Test Setup PhotosTest Setup Photos2018-04-15PDF 166.2 KB
Test Setup PhotosTest Setup Photos2018-03-14PDF 268.9 KB
Test Setup PhotosTest Setup Photos2018-03-13PDF 158.9 KB
Test Setup PhotosTest Setup Photos2018-02-27PDF 400.6 KB
Test Setup PhotosTest Setup Photos2017-12-11PDF 155 KB
Test Setup Photos SARTest Setup Photos2017-09-05PDF 301.6 KB
Test Setup Photos SARTest Setup Photos2017-08-20PDF 159.1 KB
Test Setup Photos SARTest Setup Photos2017-04-20PDF 302.1 KB
Test Setup Photos SARTest Setup Photos2017-04-18PDF 329.6 KB
Test Setup Photos SARTest Setup Photos2016-10-29PDF 326.4 KB
Test Setup Photos SARTest Setup Photos2016-10-26PDF 341.8 KB
Test Setup Photos SARTest Setup Photos2016-10-24PDF 334.1 KB
Test Setup Photos SARTest Setup Photos2016-10-23PDF 292.3 KB
Test Setup Photos SARTest Setup Photos2016-10-04PDF 423 KB
Test Setup Photos SARTest Setup Photos2016-08-26PDF 345.1 KB
Test Setup Photos SARTest Setup Photos2016-05-30PDF 375.9 KB
Passive Scan AttestationAttestation Statements2018-09-14PDF 71.9 KB
Passive Scan Security AttestationAttestation Statements2016-10-21PDF 71.9 KB
Passive Scan Security AttestationAttestation Statements2016-10-20PDF 71.9 KB
Hardware Antenna AttestationAttestation Statements2016-10-18PDF 200.3 KB
Marketing AttestationAttestation Statements2016-10-18PDF 162.3 KB
Passive Scan AttestationAttestation Statements2016-10-18PDF 18.4 KB
Cofidentiality LetterCover Letter(s)2018-09-14PDF 139.5 KB
Permissive Change LetterCover Letter(s)2018-09-14PDF 302.9 KB
Permissive Change Letter RevisedCover Letter(s)2018-09-14PDF 177.4 KB
Software Security LetterCover Letter(s)2018-09-14PDF 205.7 KB
Permissive Change LetterCover Letter(s)2018-08-23PDF 220.5 KB
Permissive Change Letter RevisedCover Letter(s)2018-08-23PDF 255.4 KB
Cofidentiality LetterCover Letter(s)2018-03-19PDF 98.4 KB
Permissive Change LetterCover Letter(s)2018-03-19PDF 237.4 KB
Permissive Change Letter RevisedCover Letter(s)2018-03-19PDF 141.9 KB
Cofidentiality LetterCover Letter(s)2018-03-05PDF 2 MB
Permissive Change LetterCover Letter(s)2018-03-05PDF 187.8 KB
Authorization LetterCover Letter(s)2017-10-19PDF 216.9 KB
Confidentiality LetterCover Letter(s)2017-10-19PDF 312.6 KB
Permissive Change LetterCover Letter(s)2017-10-19PDF 578.4 KB
Confidentiality LetterCover Letter(s)2017-10-17PDF 271.4 KB
Permissive Change LetterCover Letter(s)2017-10-17PDF 503.8 KB
Confidentiality LetterCover Letter(s)2017-09-15PDF 312.2 KB
Permissive Change LetterCover Letter(s)2017-09-15PDF 546.8 KB
Permissive Change LetterCover Letter(s)2017-09-14PDF 536.4 KB
Confidentiality LetterCover Letter(s)2017-08-31PDF 271.7 KB
Permissive Change LetterCover Letter(s)2017-08-31PDF 425 KB
Confidentiality LetterCover Letter(s)2017-06-14PDF 230.2 KB
Permissive Change LetterCover Letter(s)2017-06-14PDF 382.1 KB
Authorization LetterCover Letter(s)2017-03-09PDF 177.6 KB
Confidentiality LetterCover Letter(s)2017-03-09PDF 271.5 KB
Permissive Change LetterCover Letter(s)2017-03-09PDF 315.2 KB
Confidentiality LetterCover Letter(s)2017-02-21PDF 230.5 KB
Permissive Change LetterCover Letter(s)2017-02-21PDF 268.5 KB
Confidentiality LetterCover Letter(s)2016-10-21PDF 189.1 KB
Permissive Change LetterCover Letter(s)2016-10-21PDF 189.5 KB
Confidentiality LetterCover Letter(s)2016-10-20PDF 147.9 KB
Permissive Change LetterCover Letter(s)2016-10-20PDF 147.4 KB
Permissive Change LetterCover Letter(s)2016-10-18PDF 141.7 KB
RF Exposure SAR Report HTKRF Exposure Info2018-09-14PDF 3.3 MB
RF Exposure SAR Report YageoRF Exposure Info2018-09-14PDF 3.3 MB
RF Exposure SAR Report HTKRF Exposure Info2018-08-23PDF 3.4 MB
RF Exposure SAR Report WNCRF Exposure Info2018-08-23PDF 2.8 MB
RF Exposure SAR Report LuxshareRF Exposure Info2018-03-19PDF 4.4 MB
RF Exposure SAR Report South StarRF Exposure Info2018-03-19PDF 4.5 MB
RF Exposure SAR Report Speedwire Luxshare Metadata onlyRF Exposure Info2018-03-19PDF 4.4 MB
RF Exposure SAR Report InpaqRF Exposure Info2018-03-05PDF 4.7 MB
RF Exposure SAR Report South StarRF Exposure Info2018-03-05PDF 4.5 MB
RF Exposure SAR ReportRF Exposure Info2017-10-19PDF 3.1 MB
RF Exposure SAR ReportRF Exposure Info2017-10-17PDF 2.8 MB
RF Exposure SAR ReportRF Exposure Info2017-09-15PDF 4.4 MB
RF Exposure SAR ReportRF Exposure Info2017-09-14PDF 2.9 MB
RF Exposure SAR ReportRF Exposure Info2017-08-31PDF 2.9 MB
RF Exposure SAR ReportRF Exposure Info2017-06-14PDF 2.8 MB
RF Exposure SAR ReportRF Exposure Info2017-03-09PDF 2.9 MB
RF Exposure SAR ReportRF Exposure Info2017-02-21PDF 3 MB
RF Exposure SAR ReportRF Exposure Info2016-10-21PDF 2.9 MB
RF Exposure SAR ReportRF Exposure Info2016-10-20PDF 3 MB

Application Information

Application IDrG/67Rh2Jkg822a17LaQhg==
Final Action Date2018-09-14
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0008035131
Model3165NGU
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionIntel Dual Band Wireless-AC 3165
Responsible PartySteven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com , 803-315-6704
AgentSteven Steven Steven, Intel Mobile Communications, hotline@acbcert.com , +1803156704
Technical ContactSteven Hackett, Intel Mobile Communications, steven.c.hackett@Intel.com , +1803156704
Test FirmNawfal ASRIH, Intel Corporation S.A.S., nawfal.asrih@intel.com , 003349300962
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date03/13/2019
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20W/kg and 0.99W/kg respectively. This change establishes portable category SAR conditions for the Lenovo ideapad model S530-13IWL PC with Yageo ANTA0LC12792WLAN1 and ANTA0LC12792WLAN1 and HighTek 0ACCN018004N and 0ACCN018004N antennas. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.

Applications

Application IDDatePurpose
rG/67Rh2Jkg822a17LaQhg==2018-09-14Class II permissive change or modification of presently authorized equipment
qL5PO4tHGDrJnzwPpysLJg==2018-09-14Class II permissive change or modification of presently authorized equipment
kbDmggW1PXtDR6I7LURKgQ==2018-09-14Class II permissive change or modification of presently authorized equipment
uOBB2pDQx6Ct1pqBJUr6Zw==2018-08-23Class II permissive change or modification of presently authorized equipment
PS+r4xOqhkuWdhtqoQnbmQ==2018-08-23Class II permissive change or modification of presently authorized equipment
C/j0OCGOJmUgHpQGMWicNQ==2018-08-23Class II permissive change or modification of presently authorized equipment
r+dNtnlLcHdCZFUbd4AOQQ==2018-03-19Class II permissive change or modification of presently authorized equipment
KuAQ0sGgqhq1+jgDpE5Zcg==2018-03-19Class II permissive change or modification of presently authorized equipment
62ATRgyLYeO1jvYjmF9Y8w==2018-03-19Class II permissive change or modification of presently authorized equipment
vvZxMi/l0q+HjMHaUZV5RA==2018-03-05Class II permissive change or modification of presently authorized equipment
f/MFNyvZ9xVeQK4dACeuMw==2018-03-05Class II permissive change or modification of presently authorized equipment
0UMKZLY06FUif6+QO5fQoA==2018-03-05Class II permissive change or modification of presently authorized equipment
Kw1kj7zRjfHiILHIe5sVrQ==2017-10-19Class II permissive change or modification of presently authorized equipment
JJqSuL48NTw8G+j6tSemJg==2017-10-19Class II permissive change or modification of presently authorized equipment
D75Et13UeSiLujrbFiPq4w==2017-10-19Class II permissive change or modification of presently authorized equipment
tGQZ9xIwCsdGW2YYcuzk0A==2017-10-17Class II permissive change or modification of presently authorized equipment
qoInE5TfCsZFkSLN0tujxw==2017-10-17Class II permissive change or modification of presently authorized equipment
lbKOoTFspxJ/l+TODZZyjg==2017-10-17Class II permissive change or modification of presently authorized equipment
sRGbCRLxpTzmRhqdZkzaQw==2017-09-15Class II permissive change or modification of presently authorized equipment
FHn+e+6vgYSV8Gyhs7abcA==2017-09-15Class II permissive change or modification of presently authorized equipment
7213C6xwevRUwXneeRzgSA==2017-09-15Class II permissive change or modification of presently authorized equipment
uVDDNmG5uAz+2vkDytiWwg==2017-09-14Class II permissive change or modification of presently authorized equipment
oo7SZ89dHUKFi8llVZPuJw==2017-09-14Class II permissive change or modification of presently authorized equipment
29corazTiu0pbNEwU/0zvg==2017-09-14Class II permissive change or modification of presently authorized equipment
vTmhyOnTv4ANQtsDR4WyFw==2017-08-31Class II permissive change or modification of presently authorized equipment
c1bnD2A0cfjxxMPGwxkXOg==2017-08-31Class II permissive change or modification of presently authorized equipment
R+WyhumWj4mkF1xwnLBqTA==2017-08-31Class II permissive change or modification of presently authorized equipment
o3T1ZFUYgaNVf8o0N4VzLw==2017-06-14Class II permissive change or modification of presently authorized equipment
A1/Nlr7VXHXNoeO8ww9VNw==2017-06-14Class II permissive change or modification of presently authorized equipment
+eJSLscOs9hj2W1yyYhJug==2017-06-14Class II permissive change or modification of presently authorized equipment
h961r7+WuTbtSPBIDxTjWQ==2017-03-09Class II permissive change or modification of presently authorized equipment
DfnDIhM0UEwruZrm4GM3lw==2017-03-09Class II permissive change or modification of presently authorized equipment
0haMIPCayuFUie1btGrC6g==2017-03-09Class II permissive change or modification of presently authorized equipment
kP+Jco9ZOndcQjDoVIUq4w==2017-02-21Class II permissive change or modification of presently authorized equipment
aDH/3osO1M2iE04gORm/EA==2017-02-21Class II permissive change or modification of presently authorized equipment
UH+kISDPJ72nRjJ9y/NkCw==2017-02-21Class II permissive change or modification of presently authorized equipment
aYVEBLqlVreKRHSVI+HNMg==2016-10-21Class II permissive change or modification of presently authorized equipment
X2Ky+6wPJOqO6rgzsMkQSA==2016-10-21Class II permissive change or modification of presently authorized equipment
N4MYCOIRlXMvPa4/n0g0DQ==2016-10-21Class II permissive change or modification of presently authorized equipment
kmnFKAeLgAdsXN3sSNuAOA==2016-10-20Class II permissive change or modification of presently authorized equipment
gMgT6Duj6i3qA1ZvCbenFw==2016-10-20Class II permissive change or modification of presently authorized equipment
bi4j+MJwRufB34itBhEFfw==2016-10-20Class II permissive change or modification of presently authorized equipment
rsEZJMPzY6ZR58eVC8Gj3Q==2016-10-18Class II permissive change or modification of presently authorized equipment
BFymI7TJ9WZeY5QNMCp9Ww==2016-10-18Class II permissive change or modification of presently authorized equipment
yQzb8hVJw/1QwvdC7Nw5ow==2016-05-02Class II permissive change or modification of presently authorized equipment
WRt5KgNf4pB99ojjB0bcOQ==2016-05-02Class II permissive change or modification of presently authorized equipment
QvWT4XPlnf/kd0pogjdoLQ==2016-05-02Class II permissive change or modification of presently authorized equipment
z2BU2qrnhWsBws3eRBWKfQ==2016-04-29Class II permissive change or modification of presently authorized equipment
j+gxhdel27i3/0HhFqJDRg==2016-04-29Class II permissive change or modification of presently authorized equipment
0BTyvzM/ujY2XJ1Dzt8sNg==2016-04-29Class II permissive change or modification of presently authorized equipment
xr5wLpwAByLDGxXkqfHNbg==2016-04-27Class II permissive change or modification of presently authorized equipment
tJ6s67MfXdFvT37R9eNSAA==2016-04-27Class II permissive change or modification of presently authorized equipment
l9W9HSghD1jVuq4/qQSB1g==2016-04-27Class II permissive change or modification of presently authorized equipment
iwUqYsXjLjYCBzkJSeLCsw==2016-04-27Class II permissive change or modification of presently authorized equipment
Ck3XrDza3Zc9BTJPgZZkYA==2016-04-27Class II permissive change or modification of presently authorized equipment
6fCzeJozr8UJhO99il0g8g==2016-04-27Class II permissive change or modification of presently authorized equipment
Hwq4dzj7HeODDVd287GgSw==2016-04-07Class II permissive change or modification of presently authorized equipment
/vBGFu9lAPWa6pOo5rgMlg==2016-04-07Class II permissive change or modification of presently authorized equipment
+qlZBGt+GWrNiWl0V/Un3Q==2016-04-07Class II permissive change or modification of presently authorized equipment
qv5I1A8f1YIdQbnjWfK4XA==2016-02-29Class II permissive change or modification of presently authorized equipment
UP1V2I+Y1iqJVTcIc22PLw==2016-02-29Class II permissive change or modification of presently authorized equipment
+FC0ZXqPzMsQWf5wI7HFBA==2016-02-29Class II permissive change or modification of presently authorized equipment
iu20RQlH2hoIC1Dk0U/69w==2015-12-03Class II permissive change or modification of presently authorized equipment
hk9Qo4+Anznrr59cpavIHQ==2015-12-03Class II permissive change or modification of presently authorized equipment
Ov6SUtVCjl+dmZrAa4jN3g==2015-12-03Class II permissive change or modification of presently authorized equipment
lDPcIDkxTWdwZKhzOJwlGg==2015-09-25Class II permissive change or modification of presently authorized equipment
ah6sBpk0irERl+cvKPyzzA==2015-09-25Class II permissive change or modification of presently authorized equipment
HseOhLCbigxNj+DfTlMyJQ==2015-09-25Class II permissive change or modification of presently authorized equipment
gPklpYl32g57XYukERKmwQ==2015-09-08Class II permissive change or modification of presently authorized equipment
gHmeYdgqG9l8u0w3SUHkGg==2015-09-08Class II permissive change or modification of presently authorized equipment
ZijceYqcEf7DV8H8nx8Q2w==2015-09-08Class II permissive change or modification of presently authorized equipment
SZusZUuzABhFIzfjSZ/giA==2015-09-08Class II permissive change or modification of presently authorized equipment
8/VuLc0piN0lnR+HRfzcGg==2015-09-08Class II permissive change or modification of presently authorized equipment
2XBb9g2CHYphVLdTiPUdww==2015-09-08Class II permissive change or modification of presently authorized equipment
vmculh2q3LpTrV/tNGeMEw==2015-08-21Class II permissive change or modification of presently authorized equipment
Qz2tk4UzDbzeQYaTS9Sw7A==2015-08-21Class II permissive change or modification of presently authorized equipment
AdqjcfsDbhwxMfeNUGo8Dg==2015-08-21Class II permissive change or modification of presently authorized equipment
qEpqwT+RXaAXOxiJeaDTLg==2015-08-20Class II permissive change or modification of presently authorized equipment
XziLX3j6DPWTGgOsJjS2mg==2015-08-20Class II permissive change or modification of presently authorized equipment
2NYjfnSVk129l9bQj/R1qQ==2015-08-20Class II permissive change or modification of presently authorized equipment
lxhyz+r7FNeUnvw71tQddA==2015-06-22Class II permissive change or modification of presently authorized equipment
MR0HbKzeRe9/OTY/ZUYNPQ==2015-06-22Class II permissive change or modification of presently authorized equipment
4km/iRoa9+E6uiBKN5D9aA==2015-06-22Class II permissive change or modification of presently authorized equipment
s/UcR3VX4NgNFqfDw4F/dA==2015-06-10Class II permissive change or modification of presently authorized equipment
S/Bk+rVGWJogbe29baEudQ==2015-06-10Class II permissive change or modification of presently authorized equipment
Q11zYgM6cvjH8uDYQ2HNrQ==2015-06-10Class II permissive change or modification of presently authorized equipment
E7mNYWeflLj832zj7CuiZA==2015-04-06Class II permissive change or modification of presently authorized equipment
5fc8kCoYeimKkvVlGAW4UQ==2015-04-06Class II permissive change or modification of presently authorized equipment
0a83I7qzfjk4c65B6ufVWQ==2015-04-06Class II permissive change or modification of presently authorized equipment
oiKh+H0qB3Cms3zSS/rXEA==2015-01-26Original Equipment
gViJeL71YpxxnpQjokL2sw==2015-01-26Original Equipment
fB+2kBeUuPSVbMWtZTM+hQ==2015-01-26Original Equipment
LnIn7Nd7Ui+xfnNShmxBXg==2015-01-26Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
15BCC
2402-2480 MHz0.00215CCC
2402-2480 MHz0.003000015CCC
2402-2480 MHz0.0215CCC
2402-2480 MHz0.003000015CCO
2412-2462 MHz0.11815CCC, MO
2422-2452 MHz0.05415CCC, MO

Grants

TCB Grant - Application ZijceYqcEf7DV8H8nx8Q2w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/08/2015

Application Dated: 08/27/2015
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Network Adapter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Body and Simultaneous SAR values are 0.01W/kg and 1.45W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Dell model number: P55F, with antenna WNC part no 81EAAZ15.G19 (Tx1 & Tx2) and ACON part no AMM8P-700038 (Tx1 & Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ZijceYqcEf7DV8H8nx8Q2w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 09/08/2015

Application Dated: 08/27/2015
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Network Adapter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Body and Simultaneous SAR values are 0.01W/kg and 1.45W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Dell model number: P55F, with antenna WNC part no 81EAAZ15.G19 (Tx1 & Tx2) and ACON part no AMM8P-700038 (Tx1 & Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application z2BU2qrnhWsBws3eRBWKfQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/29/2016

Application Dated: 04/29/2016
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Dual-Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 0.71W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Dell model number: P69G, with antenna Acon part no ANP6Y-200021 (Tx1 & Tx2), WNC part no 81EAA515.G08 (Tx1 & Tx2), Acon part no ANF6Y-200003 (Tx1 & Tx2) and WNC part no 81EAA515.G09 (Tx1 & Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application z2BU2qrnhWsBws3eRBWKfQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 04/29/2016

Application Dated: 04/29/2016
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Dual-Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 0.71W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Dell model number: P69G, with antenna Acon part no ANP6Y-200021 (Tx1 & Tx2), WNC part no 81EAA515.G08 (Tx1 & Tx2), Acon part no ANF6Y-200003 (Tx1 & Tx2) and WNC part no 81EAA515.G09 (Tx1 & Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application yQzb8hVJw/1QwvdC7Nw5ow==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/02/2016

Application Dated: 05/02/2016
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Dual-Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC MO 15C 2412.0  -  2462.0 0.118  
CC MO 15C 2422.0  -  2452.0 0.054  
CC MO 15C 5745.0  -  5825.0 0.037  
CC MO 15C 5755.0  -  5795.0 0.043  
CC MO 15C 5775.0  -  5775.0 0.33  

Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.56W/kg and 1.23W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Dell model number: P25T, with antenna Acon part no ANP6Y-100085 (Tx1), APN6Y-100086 (Tx2) and WNC part no 81EAA515.G17 (Tx1), 81EAA515.G18 (Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application yQzb8hVJw/1QwvdC7Nw5ow==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 05/02/2016

Application Dated: 05/02/2016
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Dual-Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC MO 15C 2412.0  -  2462.0 0.118  
CC MO 15C 2422.0  -  2452.0 0.054  
CC MO 15C 5745.0  -  5825.0 0.037  
CC MO 15C 5755.0  -  5795.0 0.043  
CC MO 15C 5775.0  -  5775.0 0.33  

Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.56W/kg and 1.23W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Dell model number: P25T, with antenna Acon part no ANP6Y-100085 (Tx1), APN6Y-100086 (Tx2) and WNC part no 81EAA515.G17 (Tx1), 81EAA515.G18 (Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application XziLX3j6DPWTGgOsJjS2mg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 08/20/2015

Application Dated: 08/20/2015
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Network Adapter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.028  
CC MO 15E 5190.0  -  5230.0 0.044  
CC MO 15E 5210.0  -  5210.0 0.024  
CC MO ND 15E 5260.0  -  5320.0 0.039  
CC MO ND 15E 5270.0  -  5310.0 0.042  
CC MO ND 15E 5290.0  -  5290.0 0.021  
CC MO ND 15E 5500.0  -  5700.0 0.042  
CC MO ND 15E 5510.0  -  5670.0 0.047  
CC MO ND 15E 5720.0  -  5720.0 0.043  
CC MO ND 15E 5710.0  -  5710.0 0.044  
CC MO ND 15E 5530.0  -  5690.0 0.045  

Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR: 1.01W/kg and 1.02W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Lenovo model number: FLEX3-1580, with antenna HighTek and WNC part no 025.900CR.0001 (Tx1) and 025.900CS.0001 (Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application XziLX3j6DPWTGgOsJjS2mg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 08/20/2015

Application Dated: 08/20/2015
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Network Adapter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.028  
CC MO 15E 5190.0  -  5230.0 0.044  
CC MO 15E 5210.0  -  5210.0 0.024  
CC MO ND 15E 5260.0  -  5320.0 0.039  
CC MO ND 15E 5270.0  -  5310.0 0.042  
CC MO ND 15E 5290.0  -  5290.0 0.021  
CC MO ND 15E 5500.0  -  5700.0 0.042  
CC MO ND 15E 5510.0  -  5670.0 0.047  
CC MO ND 15E 5720.0  -  5720.0 0.043  
CC MO ND 15E 5710.0  -  5710.0 0.044  
CC MO ND 15E 5530.0  -  5690.0 0.045  

Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR: 1.01W/kg and 1.02W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Lenovo model number: FLEX3-1580, with antenna HighTek and WNC part no 025.900CR.0001 (Tx1) and 025.900CS.0001 (Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application xr5wLpwAByLDGxXkqfHNbg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/27/2016

Application Dated: 04/27/2016
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Dual-Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC MO 15C 2412.0  -  2462.0 0.118  
CC MO 15C 2422.0  -  2452.0 0.054  
CC MO 15C 5745.0  -  5825.0 0.037  
CC MO 15C 5755.0  -  5795.0 0.043  
CC MO 15C 5775.0  -  5775.0 0.33  

Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 1.26W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Dell model number: P58F, with antenna Acon part no ANP6Y-200022 (Tx1 & Tx2), WNC part no 81EAA515.G10 (Tx1 & Tx2), Acon part no ANF6Y-200004 (Tx1 & Tx2) and WNC part no 81EAA515.G11 (Tx1 & Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application xr5wLpwAByLDGxXkqfHNbg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 04/27/2016

Application Dated: 04/27/2016
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Dual-Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC MO 15C 2412.0  -  2462.0 0.118  
CC MO 15C 2422.0  -  2452.0 0.054  
CC MO 15C 5745.0  -  5825.0 0.037  
CC MO 15C 5755.0  -  5795.0 0.043  
CC MO 15C 5775.0  -  5775.0 0.33  

Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 1.26W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Dell model number: P58F, with antenna Acon part no ANP6Y-200022 (Tx1 & Tx2), WNC part no 81EAA515.G10 (Tx1 & Tx2), Acon part no ANF6Y-200004 (Tx1 & Tx2) and WNC part no 81EAA515.G11 (Tx1 & Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application X2Ky+6wPJOqO6rgzsMkQSA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 10/21/2016

Application Dated: 10/20/2016
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Dual-Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 1.43W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad MIIX 510-12ISK, with antenna South Star part no 64451202400010 (Tx1) & 64451202400020 (Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application X2Ky+6wPJOqO6rgzsMkQSA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 10/21/2016

Application Dated: 10/20/2016
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Dual-Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 1.43W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad MIIX 510-12ISK, with antenna South Star part no 64451202400010 (Tx1) & 64451202400020 (Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application WRt5KgNf4pB99ojjB0bcOQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/02/2016

Application Dated: 05/02/2016
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Dual-Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.028  
CC MO 15E 5190.0  -  5230.0 0.05  
CC MO 15E 5210.0  -  5210.0 0.024  
CC MO ND 15E 5260.0  -  5320.0 0.039  
CC MO ND 15E 5270.0  -  5310.0 0.042  
CC MO ND 15E 5290.0  -  5290.0 0.021  
CC MO ND 15E 5500.0  -  5700.0 0.042  
CC MO ND 15E 5510.0  -  5670.0 0.047  
CC MO ND 15E 5720.0  -  5720.0 0.043  
CC MO ND 15E 5710.0  -  5710.0 0.044  
CC MO ND 15E 5530.0  -  5690.0 0.045  

Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.28W/kg and 1.23W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Dell model number: P25T, with antenna Acon part no ANP6Y-100085 (Tx1), APN6Y-100086 (Tx2) and WNC part no 81EAA515.G17 (Tx1), 81EAA515.G18 (Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application WRt5KgNf4pB99ojjB0bcOQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 05/02/2016

Application Dated: 05/02/2016
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Dual-Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.028  
CC MO 15E 5190.0  -  5230.0 0.05  
CC MO 15E 5210.0  -  5210.0 0.024  
CC MO ND 15E 5260.0  -  5320.0 0.039  
CC MO ND 15E 5270.0  -  5310.0 0.042  
CC MO ND 15E 5290.0  -  5290.0 0.021  
CC MO ND 15E 5500.0  -  5700.0 0.042  
CC MO ND 15E 5510.0  -  5670.0 0.047  
CC MO ND 15E 5720.0  -  5720.0 0.043  
CC MO ND 15E 5710.0  -  5710.0 0.044  
CC MO ND 15E 5530.0  -  5690.0 0.045  

Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.28W/kg and 1.23W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Dell model number: P25T, with antenna Acon part no ANP6Y-100085 (Tx1), APN6Y-100086 (Tx2) and WNC part no 81EAA515.G17 (Tx1), 81EAA515.G18 (Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application vvZxMi/l0q+HjMHaUZV5RA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 03/05/2018

Application Dated: 03/05/2018
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Dual Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CO 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.52W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Lenovo Flex 6-11IGM PC with antennas, Inpaq 64451203800070 and 64451203800050 and antenna South Star 64451203800020 and 64451203800010.

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CO: Transmitter meets technical requirements only for use at coast stations.

EAS Grant - Application vvZxMi/l0q+HjMHaUZV5RA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 03/05/2018

Application Dated: 03/05/2018
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Dual Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CO 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.52W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Lenovo Flex 6-11IGM PC with antennas, Inpaq 64451203800070 and 64451203800050 and antenna South Star 64451203800020 and 64451203800010.

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CO: Transmitter meets technical requirements only for use at coast stations.

TCB Grant - Application vTmhyOnTv4ANQtsDR4WyFw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 08/31/2017

Application Dated: 08/31/2017
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Dual Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.028  
38 CC MO 15E 5190.0  -  5230.0 0.05  
38 CC MO 15E 5210.0  -  5210.0 0.024  
38 CC MO ND 15E 5260.0  -  5320.0 0.039  
38 CC MO ND 15E 5270.0  -  5310.0 0.042  
38 CC MO ND 15E 5290.0  -  5290.0 0.021  
38 CC MO ND 15E 5500.0  -  5700.0 0.042  
38 CC MO ND 15E 5510.0  -  5670.0 0.047  
38 CC MO ND 15E 5720.0  -  5720.0 0.043  
38 CC MO ND 15E 5710.0  -  5710.0 0.044  
38 CC MO ND 15E 5530.0  -  5690.0 0.045  
49 CC MO 15E 5745.0  -  5825.0 0.037  
49 CC MO 15E 5755.0  -  5795.0 0.043  
49 CC MO 15E 5775.0  -  5775.0 0.33  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.48W/kg and 1.54W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo Yoga 720-12IKB, with antenna South Star part no 1109-02353 (Tx1) and 1109-2360 (Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
49: The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application vTmhyOnTv4ANQtsDR4WyFw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 08/31/2017

Application Dated: 08/31/2017
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Dual Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.028  
38 CC MO 15E 5190.0  -  5230.0 0.05  
38 CC MO 15E 5210.0  -  5210.0 0.024  
38 CC MO ND 15E 5260.0  -  5320.0 0.039  
38 CC MO ND 15E 5270.0  -  5310.0 0.042  
38 CC MO ND 15E 5290.0  -  5290.0 0.021  
38 CC MO ND 15E 5500.0  -  5700.0 0.042  
38 CC MO ND 15E 5510.0  -  5670.0 0.047  
38 CC MO ND 15E 5720.0  -  5720.0 0.043  
38 CC MO ND 15E 5710.0  -  5710.0 0.044  
38 CC MO ND 15E 5530.0  -  5690.0 0.045  
49 CC MO 15E 5745.0  -  5825.0 0.037  
49 CC MO 15E 5755.0  -  5795.0 0.043  
49 CC MO 15E 5775.0  -  5775.0 0.33  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.48W/kg and 1.54W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo Yoga 720-12IKB, with antenna South Star part no 1109-02353 (Tx1) and 1109-2360 (Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
49: The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application vmculh2q3LpTrV/tNGeMEw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 08/21/2015

Application Dated: 08/21/2015
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Network Adapter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.028  
CC MO 15E 5190.0  -  5230.0 0.044  
CC MO 15E 5210.0  -  5210.0 0.024  
CC MO ND 15E 5260.0  -  5320.0 0.039  
CC MO ND 15E 5270.0  -  5310.0 0.042  
CC MO ND 15E 5290.0  -  5290.0 0.021  
CC MO ND 15E 5500.0  -  5700.0 0.042  
CC MO ND 15E 5510.0  -  5670.0 0.047  
CC MO ND 15E 5720.0  -  5720.0 0.043  
CC MO ND 15E 5710.0  -  5710.0 0.044  
CC MO ND 15E 5530.0  -  5690.0 0.045  

Power Output listed is conducted. Modular Approval. The antenna(s) this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR are 0.39W/kg and 0.40W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Lenovo model number: FLEX3-1480, with antenna HighTek part no 025.900CR.0001 (Tx1) and 025.900CS.0001 (Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application vmculh2q3LpTrV/tNGeMEw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 08/21/2015

Application Dated: 08/21/2015
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Network Adapter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.028  
CC MO 15E 5190.0  -  5230.0 0.044  
CC MO 15E 5210.0  -  5210.0 0.024  
CC MO ND 15E 5260.0  -  5320.0 0.039  
CC MO ND 15E 5270.0  -  5310.0 0.042  
CC MO ND 15E 5290.0  -  5290.0 0.021  
CC MO ND 15E 5500.0  -  5700.0 0.042  
CC MO ND 15E 5510.0  -  5670.0 0.047  
CC MO ND 15E 5720.0  -  5720.0 0.043  
CC MO ND 15E 5710.0  -  5710.0 0.044  
CC MO ND 15E 5530.0  -  5690.0 0.045  

Power Output listed is conducted. Modular Approval. The antenna(s) this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR are 0.39W/kg and 0.40W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Lenovo model number: FLEX3-1480, with antenna HighTek part no 025.900CR.0001 (Tx1) and 025.900CS.0001 (Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application uVDDNmG5uAz+2vkDytiWwg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/14/2017

Application Dated: 09/14/2017
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Dual Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.29W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad 120S-11IAP, with antenna HongBo part no 2602507100 (Tx1) & 2602507000 (Tx2) and South Star part no NDX-NG116-R (Tx1) & NDX-NG116-L (Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application uVDDNmG5uAz+2vkDytiWwg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 09/14/2017

Application Dated: 09/14/2017
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Dual Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.29W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad 120S-11IAP, with antenna HongBo part no 2602507100 (Tx1) & 2602507000 (Tx2) and South Star part no NDX-NG116-R (Tx1) & NDX-NG116-L (Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application UP1V2I+Y1iqJVTcIc22PLw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 02/29/2016

Application Dated: 02/29/2016
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Dual-Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.028  
CC ND 15E 5190.0  -  5230.0 0.05  
CC MO 15E 5210.0  -  5210.0 0.024  
CC MO ND 15E 5260.0  -  5320.0 0.039  
CC MO ND 15E 5270.0  -  5310.0 0.042  
CC MO ND 15E 5290.0  -  5290.0 0.021  
CC MO ND 15E 5500.0  -  5700.0 0.042  
CC MO ND 15E 5510.0  -  5670.0 0.047  
CC MO ND 15E 5720.0  -  5720.0 0.043  
CC MO ND 15E 5710.0  -  5710.0 0.044  
CC MO ND 15E 5530.0  -  5690.0 0.045  

Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.12W/kg respectively.

This change establishes portable category SAR conditions for the Lenovo model TP00066C PC with Tongda (DQ690210902 & DQ690210903) and WNC(DQ6G15G9100 and DQ6G15G9200) antennas.

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application UP1V2I+Y1iqJVTcIc22PLw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 02/29/2016

Application Dated: 02/29/2016
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Dual-Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.028  
CC ND 15E 5190.0  -  5230.0 0.05  
CC MO 15E 5210.0  -  5210.0 0.024  
CC MO ND 15E 5260.0  -  5320.0 0.039  
CC MO ND 15E 5270.0  -  5310.0 0.042  
CC MO ND 15E 5290.0  -  5290.0 0.021  
CC MO ND 15E 5500.0  -  5700.0 0.042  
CC MO ND 15E 5510.0  -  5670.0 0.047  
CC MO ND 15E 5720.0  -  5720.0 0.043  
CC MO ND 15E 5710.0  -  5710.0 0.044  
CC MO ND 15E 5530.0  -  5690.0 0.045  

Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.12W/kg respectively.

This change establishes portable category SAR conditions for the Lenovo model TP00066C PC with Tongda (DQ690210902 & DQ690210903) and WNC(DQ6G15G9100 and DQ6G15G9200) antennas.

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application uOBB2pDQx6Ct1pqBJUr6Zw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 08/23/2018

Application Dated: 08/23/2018
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Dual Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC MO 15C 2412.0  -  2462.0 0.118  
CC MO 15C 2422.0  -  2452.0 0.054  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.70W/kg and 1.18W/kg respectively.

This change establishes portable category SAR conditions for the ideaPad Lenovo model 730S-13IWL PC with WNC 025.901D0.0011 and 025.901D3.0011 and HighTek 025.901D0.0001 and 025.901D3.0001 antennas.

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application uOBB2pDQx6Ct1pqBJUr6Zw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 08/23/2018

Application Dated: 08/23/2018
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Dual Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC MO 15C 2412.0  -  2462.0 0.118  
CC MO 15C 2422.0  -  2452.0 0.054  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.70W/kg and 1.18W/kg respectively.

This change establishes portable category SAR conditions for the ideaPad Lenovo model 730S-13IWL PC with WNC 025.901D0.0011 and 025.901D3.0011 and HighTek 025.901D0.0001 and 025.901D3.0001 antennas.

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application UH+kISDPJ72nRjJ9y/NkCw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 02/21/2017

Application Dated: 02/21/2017
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Dual-Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.46W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad 720S-14IKB, with antenna HighTek part no 0ACCN016017N (Tx1) & 0ACCN016018N (Tx2) and Tongda part no T-543-9021130-1 (Tx1) & T-543-9021130-2 (Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application UH+kISDPJ72nRjJ9y/NkCw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 02/21/2017

Application Dated: 02/21/2017
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Dual-Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.46W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad 720S-14IKB, with antenna HighTek part no 0ACCN016017N (Tx1) & 0ACCN016018N (Tx2) and Tongda part no T-543-9021130-1 (Tx1) & T-543-9021130-2 (Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application tJ6s67MfXdFvT37R9eNSAA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/27/2016

Application Dated: 04/26/2016
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Dual-Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC MO 15C 2412.0  -  2462.0 0.118  
CC MO 15C 2422.0  -  2452.0 0.054  
CC MO 15C 5745.0  -  5825.0 0.037  
CC MO 15C 5755.0  -  5795.0 0.043  
CC MO 15C 5775.0  -  5775.0 0.33  

Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous 0.31W/kg and 0.76W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Dell model number: P30E, with antenna Acon part no ANF6Y-200005 (Tx1 & Tx2) and WNC part no 81EAA515.G12 (Tx1 & Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application tJ6s67MfXdFvT37R9eNSAA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 04/27/2016

Application Dated: 04/26/2016
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Dual-Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC MO 15C 2412.0  -  2462.0 0.118  
CC MO 15C 2422.0  -  2452.0 0.054  
CC MO 15C 5745.0  -  5825.0 0.037  
CC MO 15C 5755.0  -  5795.0 0.043  
CC MO 15C 5775.0  -  5775.0 0.33  

Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous 0.31W/kg and 0.76W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Dell model number: P30E, with antenna Acon part no ANF6Y-200005 (Tx1 & Tx2) and WNC part no 81EAA515.G12 (Tx1 & Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application tGQZ9xIwCsdGW2YYcuzk0A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 10/17/2017

Application Dated: 10/17/2017
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Dual Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.47W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad 120S-14IAP, with antenna Inpaq part no WA-F-LB-02-120 (Tx1) & WA-F-LB-02-078 (Tx2) and South Star part no NDX-ND140APL2 (Tx1 & Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application tGQZ9xIwCsdGW2YYcuzk0A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 10/17/2017

Application Dated: 10/17/2017
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Dual Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.47W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad 120S-14IAP, with antenna Inpaq part no WA-F-LB-02-120 (Tx1) & WA-F-LB-02-078 (Tx2) and South Star part no NDX-ND140APL2 (Tx1 & Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application SZusZUuzABhFIzfjSZ/giA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/08/2015

Application Dated: 09/08/2015
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Network Adapter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.028  
CC MO 15E 5190.0  -  5230.0 0.044  
CC MO 15E 5210.0  -  5210.0 0.024  
CC MO ND 15E 5260.0  -  5320.0 0.039  
CC MO ND 15E 5270.0  -  5310.0 0.042  
CC MO ND 15E 5290.0  -  5290.0 0.021  
CC MO ND 15E 5500.0  -  5700.0 0.042  
CC MO ND 15E 5510.0  -  5670.0 0.047  
CC MO ND 15E 5720.0  -  5720.0 0.043  
CC MO ND 15E 5710.0  -  5710.0 0.044  
CC MO ND 15E 5530.0  -  5690.0 0.045  

Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body SAR is 1.37W/kg.

This change is to request approval for portable category specific host tablet PC, Dell model number: P57G, with antenna WNC part no 81EAAX15.G25 (Tx1 & Tx2) and ACON part no APP6Y-700119 (Tx1 & Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application SZusZUuzABhFIzfjSZ/giA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 09/08/2015

Application Dated: 09/08/2015
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Network Adapter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.028  
CC MO 15E 5190.0  -  5230.0 0.044  
CC MO 15E 5210.0  -  5210.0 0.024  
CC MO ND 15E 5260.0  -  5320.0 0.039  
CC MO ND 15E 5270.0  -  5310.0 0.042  
CC MO ND 15E 5290.0  -  5290.0 0.021  
CC MO ND 15E 5500.0  -  5700.0 0.042  
CC MO ND 15E 5510.0  -  5670.0 0.047  
CC MO ND 15E 5720.0  -  5720.0 0.043  
CC MO ND 15E 5710.0  -  5710.0 0.044  
CC MO ND 15E 5530.0  -  5690.0 0.045  

Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body SAR is 1.37W/kg.

This change is to request approval for portable category specific host tablet PC, Dell model number: P57G, with antenna WNC part no 81EAAX15.G25 (Tx1 & Tx2) and ACON part no APP6Y-700119 (Tx1 & Tx2).

Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application sRGbCRLxpTzmRhqdZkzaQw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/15/2017

Application Dated: 09/15/2017
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Dual Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 0.91W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Lenovo model number Lenovo ideapad 320S-13IKB, with antennas B&T part no AG-041533-1314 (Tx1) & AG-041533-1313 (Tx2) and South Star part no NA133KBL1-MAIN (Tx1) & NA133KBL1-AUX (Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application sRGbCRLxpTzmRhqdZkzaQw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 09/15/2017

Application Dated: 09/15/2017
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Dual Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 0.91W/kg respectively.

This change is to request approval for portable category specific host tablet PC, Lenovo model number Lenovo ideapad 320S-13IKB, with antennas B&T part no AG-041533-1314 (Tx1) & AG-041533-1313 (Tx2) and South Star part no NA133KBL1-MAIN (Tx1) & NA133KBL1-AUX (Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application s/UcR3VX4NgNFqfDw4F/dA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/10/2015

Application Dated: 06/10/2015
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Dual Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.028  
CC MO 15E 5190.0  -  5230.0 0.044  
CO MO 15E 5210.0  -  5210.0 0.024  
CC MO ND 15E 5260.0  -  5320.0 0.039  
CC MO ND 15E 5270.0  -  5310.0 0.042  
CC MO ND 15E 5290.0  -  5290.0 0.021  
CC MO ND 15E 5500.0  -  5700.0 0.042  
CC MO ND 15E 5510.0  -  5670.0 0.047  
CC MO ND 15E 5720.0  -  5720.0 0.043  
CC MO ND 15E 5710.0  -  5710.0 0.044  
CC MO ND 15E 5530.0  -  5690.0 0.045  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile configurations and only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

This change is to request approval for a dipole type antenna Wieson Technologies part number GY121HT0321-003-H. This dipole antenna will be restricted to mobile category or desktop host systems.


CC: This device is certified pursuant to two different Part 15 rules sections.
CO: Transmitter meets technical requirements only for use at coast stations.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application s/UcR3VX4NgNFqfDw4F/dA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 06/10/2015

Application Dated: 06/10/2015
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Dual Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.028  
CC MO 15E 5190.0  -  5230.0 0.044  
CO MO 15E 5210.0  -  5210.0 0.024  
CC MO ND 15E 5260.0  -  5320.0 0.039  
CC MO ND 15E 5270.0  -  5310.0 0.042  
CC MO ND 15E 5290.0  -  5290.0 0.021  
CC MO ND 15E 5500.0  -  5700.0 0.042  
CC MO ND 15E 5510.0  -  5670.0 0.047  
CC MO ND 15E 5720.0  -  5720.0 0.043  
CC MO ND 15E 5710.0  -  5710.0 0.044  
CC MO ND 15E 5530.0  -  5690.0 0.045  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile configurations and only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

This change is to request approval for a dipole type antenna Wieson Technologies part number GY121HT0321-003-H. This dipole antenna will be restricted to mobile category or desktop host systems.


CC: This device is certified pursuant to two different Part 15 rules sections.
CO: Transmitter meets technical requirements only for use at coast stations.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application S/Bk+rVGWJogbe29baEudQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/10/2015

Application Dated: 06/10/2015
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Dual Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC MO 15C 2412.0  -  2462.0 0.118  
CC MO 15C 2422.0  -  2452.0 0.054  
CC MO 15C 5745.0  -  5825.0 0.037  
CC MO 15C 5755.0  -  5795.0 0.043  
CC MO 15C 5775.0  -  5775.0 0.33  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile configuration and only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

This change is to request approval for a dipole type antenna Wieson Technologies part number GY121HT0321-003-H. This dipole antenna will be restricted to mobile category or desktop host systems.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application S/Bk+rVGWJogbe29baEudQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 06/10/2015

Application Dated: 06/10/2015
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD93165NGU
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Dual Band Wireless-AC 3165
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC MO 15C 2412.0  -  2462.0 0.118  
CC MO 15C 2422.0  -  2452.0 0.054  
CC MO 15C 5745.0  -  5825.0 0.037  
CC MO 15C 5755.0  -  5795.0 0.043  
CC MO 15C 5775.0  -  5775.0 0.33  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile configuration and only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

This change is to request approval for a dipole type antenna Wieson Technologies part number GY121HT0321-003-H. This dipole antenna will be restricted to mobile category or desktop host systems.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: