FCC ID PD94965AGN
Intel Wireless WiFi Link 4965AGN
by Intel Mobile Communications
Grantee Code: PD9 Product Code: 4965AGN
Latest application date: 2007-04-26
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2007-04-26 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2007-04-26 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2006-12-21 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2006-12-21 |
| 5180-5240 MHz | Original Equipment | 2006-11-17 |
| 2412-2462 MHz | Original Equipment | 2006-11-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2006-12-13 | PDF 3 MB |
| Internal Photos | Internal Photos | 2007-04-26 | PDF 479.6 KB |
| Internal Photos | Internal Photos | 2006-12-21 | PDF 479.6 KB |
| External Photos | External Photos | 2007-04-26 | PDF 423.9 KB |
| External Photos | External Photos | 2006-12-21 | PDF 423.9 KB |
| External Photos | External Photos | 2006-12-13 | PDF 423.9 KB |
| Label and Location | ID Label/Location Info | 2007-04-26 | PDF 842.5 KB |
| Label and Location | ID Label/Location Info | 2006-12-21 | PDF 842.5 KB |
| Label and Location | ID Label/Location Info | 2006-12-13 | PDF 596.2 KB |
| Label Metadata only | ID Label/Location Info | 2006-11-17 | PDF 324.6 KB |
| Test Setup Photos | Test Setup Photos | 2007-04-26 | PDF 625.2 KB |
| Test Setup Photos | Test Setup Photos | 2006-12-21 | PDF 631.6 KB |
| Test Setup Photos | Test Setup Photos | 2006-12-13 | PDF 787.8 KB |
| Test Report Metadata only | Test Setup Photos | 2006-11-17 | PDF 1.8 MB |
| Test Report | Test Report | 2007-04-26 | PDF 1.5 MB |
| Test Report | Test Report | 2007-04-26 | PDF 1.1 MB |
| Test Report | Test Report | 2006-12-21 | PDF 1.4 MB |
| Test Report | Test Report | 2006-12-21 | PDF 1.1 MB |
| Test Report | Test Report | 2006-12-13 | PDF 801.9 KB |
| DFS Test Report | Test Report | 2006-11-17 | PDF 517.8 KB |
| Test Report Metadata only | Test Report | 2006-11-17 | PDF 2.3 MB |
| Test Report Revised | Test Report | 2006-11-17 | PDF 1.9 MB |
| Test Report Revised | Test Report | 2006-11-17 | PDF 2.4 MB |
| Attestation Letter | Attestation Statements | 2007-04-26 | PDF 83.5 KB |
| Attestation Letter | Cover Letter(s) | 2007-04-26 | PDF 779.3 KB |
| Attestation Statement | Attestation Statements | 2007-04-26 | PDF 83.5 KB |
| Channel Attestation | Attestation Statements | 2007-04-26 | PDF 301 KB |
| Attestation | Attestation Statements | 2006-12-21 | PDF 83.5 KB |
| Attestation Statement | Attestation Statements | 2006-12-21 | PDF 301 KB |
| Attestation Statement | Attestation Statements | 2006-11-17 | PDF 204.2 KB |
| Power Attestation | Attestation Statements | 2006-11-17 | PDF 301 KB |
| Power Attestation Statement | Attestation Statements | 2006-11-17 | PDF 301 KB |
| Authorization Letter | Cover Letter(s) | 2007-04-26 | PDF 779.3 KB |
| Permissive Change Letter | Cover Letter(s) | 2007-04-26 | PDF 361.5 KB |
| Response Letter FCC | Cover Letter(s) | 2007-04-26 | PDF 16.1 KB |
| Cover Letter | Cover Letter(s) | 2006-12-21 | PDF 378.9 KB |
| Cover Letter | Cover Letter(s) | 2006-12-21 | PDF 360.6 KB |
| Confidentiality | Cover Letter(s) | 2006-12-13 | PDF 145.6 KB |
| Cover Letter | Cover Letter(s) | 2006-12-13 | PDF 93.3 KB |
| Confidentilaity | Cover Letter(s) | 2006-11-17 | PDF 145.6 KB |
| Cover Letter | Cover Letter(s) | 2006-11-17 | PDF 360.7 KB |
| Modular Approval Letter | Cover Letter(s) | 2006-11-17 | PDF 192.2 KB |
| Product Brief | Cover Letter(s) | 2006-11-17 | PDF 191.4 KB |
| RF Exposure Antenna Info | RF Exposure Info | 2007-04-26 | PDF 1.1 MB |
| RF Exposure Info Antenna | RF Exposure Info | 2007-04-26 | PDF 1.1 MB |
| RF Exposure MPE | RF Exposure Info | 2007-04-26 | PDF 429.5 KB |
| RF Exposure Antenna Info | RF Exposure Info | 2006-12-21 | PDF 231.6 KB |
| RF Exposure MPE | RF Exposure Info | 2006-12-21 | PDF 428.6 KB |
| RF Exposure Antenna Info | RF Exposure Info | 2006-11-17 | PDF 200.9 KB |
| RF Exposure MPE | RF Exposure Info | 2006-11-17 | PDF 190.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 11.7 KB | |
| Schematics Metadata only | Schematics | PDF 554.3 KB | |
| Description Metadata only | Operational Description | PDF 200.1 KB | |
| Descritpion Metadata only | Operational Description | PDF 200.1 KB |
Application Information
| Application ID | vs/AkQmxCP1iqTFrLMgF4g== |
|---|---|
| Final Action Date | 2007-04-26 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008035131 |
| Model | 4965AGN |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Intel Wireless WiFi Link 4965AGN |
| Responsible Party | Steven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com  , 803-216-2344 |
| Technical Contact | Johnny Candelas, Aegis Labs, Inc., johnny@aegislabsinc.com  , 949 454 8295 |
| Test Firm | Steve Kuiper, AEGIS Labs, Inc., steve@aegislabsinc.com , 949-454-8295 |
| TCB Email | Hotline@atcb.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| vs/AkQmxCP1iqTFrLMgF4g== | 2007-04-26 | Class II permissive change or modification of presently authorized equipment |
| VS8FYklt2rUBmqr1VErNGQ== | 2007-04-26 | Class II permissive change or modification of presently authorized equipment |
| 2rUgsdtIe3GzFsN9D8qi/g== | 2006-12-21 | Class II permissive change or modification of presently authorized equipment |
| 1TVGgRZu+jBk2COEEiHlxQ== | 2006-12-21 | Class II permissive change or modification of presently authorized equipment |
| 7PLr0HAZ7Y7cg97K1os/YA== | 2006-12-13 | Original Equipment |
| SWtOtVUlauiRDju3vSUeIw== | 2006-11-17 | Original Equipment |
| 8A4d6J6OsQcQY7Ht81Se+Q== | 2006-11-17 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2412-2462 MHz | 0.242 | 15C | CC, MO |
| 2412-2462 MHz | 0.242 | 15C | CC |
| 2412-2462 MHz | 0.463 | 15C | CC, MO |
| 5180-5240 MHz | 0.049 | 15E | CC, MO |
| 5180-5240 MHz | 0.049 | 15E | CC |
| 5180-5240 MHz | 0.05 | 15E | CC, MO |
| 5260-5320 MHz | 0.087 | 15E | CC, MO |
| 5260-5320 MHz | 0.087 | 15E | CC |
| 5260-5320 MHz | 0.123 | 15E | CC, MO |
| 5745-5825 MHz | 0.123 | 15C | CC, MO |
| 5745-5825 MHz | 0.123 | 15C | CC |
| 5745-5825 MHz | 0.303 | 15C | CC, MO |
Grants
TCB Grant - Application VS8FYklt2rUBmqr1VErNGQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 | Date of Grant: 04/26/2007 Application Dated: 04/26/2007 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD94965AGN |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless WiFi Link 4965AGN |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.05 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.123 |
| Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application VS8FYklt2rUBmqr1VErNGQ==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States | Date of Grant: 04/26/2007 Application Dated: 04/26/2007 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD94965AGN |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless WiFi Link 4965AGN |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.05 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.123 |
| Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |
| EA504314 |
TCB Grant - Application vs/AkQmxCP1iqTFrLMgF4g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 | Date of Grant: 04/26/2007 Application Dated: 04/26/2007 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD94965AGN |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless WiFi Link 4965AGN |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.463 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.303 |
| Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application vs/AkQmxCP1iqTFrLMgF4g==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States | Date of Grant: 04/26/2007 Application Dated: 04/26/2007 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD94965AGN |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless WiFi Link 4965AGN |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.463 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.303 |
| Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |
| EA314152 |
TCB Grant - Application SWtOtVUlauiRDju3vSUeIw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/17/2006 Application Dated: 11/02/2006 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD94965AGN |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless WiFi Link 4965AGN |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.049 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.087 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report andOrder FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application SWtOtVUlauiRDju3vSUeIw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 11/17/2006 Application Dated: 11/02/2006 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD94965AGN |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless WiFi Link 4965AGN |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.049 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.087 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report andOrder FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/17/2006 Application Dated: 11/02/2006 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD94965AGN |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless WiFi Link 4965AGN |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.242 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.123 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 8A4d6J6OsQcQY7Ht81Se+Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 11/17/2006 Application Dated: 11/02/2006 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD94965AGN |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless WiFi Link 4965AGN |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.242 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.123 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/13/2006 Application Dated: 12/13/2006 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD94965AGN |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Class B Computing Device Peripheral |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
EAS Grant - Application 7PLr0HAZ7Y7cg97K1os/YA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/13/2006 Application Dated: 12/13/2006 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD94965AGN |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Class B Computing Device Peripheral |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/21/2006 Application Dated: 12/21/2006 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD94965AGN |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless WiFi Link 4965AGN |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.049 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.087 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 2rUgsdtIe3GzFsN9D8qi/g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/21/2006 Application Dated: 12/21/2006 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD94965AGN |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless WiFi Link 4965AGN |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.049 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.087 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/21/2006 Application Dated: 12/21/2006 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD94965AGN |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless WiFi Link 4965AGN |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.242 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.123 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 1TVGgRZu+jBk2COEEiHlxQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/21/2006 Application Dated: 12/21/2006 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD94965AGN |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless WiFi Link 4965AGN |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.242 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.123 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |